component

NCP170BXV250T2G

Public Made by Adom

by adom

onsemi Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-563. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)ncp170bxv250t2gfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCP170BXV250T2G

onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-563

NCP170BXV250T2G from onsemi, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Power supply input voltage; operating input range is 2.2 V to 5.5 V and the absolute maximum input voltage is 6.0 V.
2 GND power_in Power supply ground pin.
3 OUT power_out Regulated output pin; the absolute maximum output voltage is −0.3 V to VIN + 0.3 V.
4 NC unconnected No connect.
5 GND power_in Power supply ground pin (second GND pin, present on the SOT-563 package only).
6 EN input Chip enable pin (active high): VEN above 1.2 V enables the device and VEN below 0.4 V disables it; absolute maximum range is −0.3 V to 6.0 V.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOT-563
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Input Voltage VIN 2.2 5.5 V 7
Output Voltage VOUT 2.475 2.5 2.525 V TA = +25°C 7
Output Voltage VOUT 2.45 2.5 2.55 V −40°C ≤ TJ ≤ 85°C 7
Line Regulation LineReg 0.05 0.2 %/V 3.5 V < VIN ≤ 5.5 V, IOUT = 1 mA 7
Load Regulation LoadReg -20 1 20 mV 0 mA < IOUT ≤ 150 mA, VIN = 3.5 V 7
Dropout Voltage VDO 240 330 mV IOUT = 150 mA (Note 20) 7
Output Current IOUT 150 mA Respect SOA (Note 21) 7
Quiescent Current IQ 0.5 0.9 A IOUT = 0 mA 7
Standby Current ISTB 0.1 0.5 A VEN = 0 V, TJ = 25°C 7
EN Pin Threshold Voltage “H” VENH 1.2 V EN Input Voltage “H” 7
EN Pin Threshold Voltage “L” VENL 0.4 V EN Input Voltage “L” 7
Input Voltage (absolute maximum) VIN 6 V 2
Output Voltage (absolute maximum range) VOUT -0.3 V Maximum printed as VIN + 0.3 2
Chip Enable Input (absolute maximum range) VCE -0.3 6 V 2
Maximum Junction Temperature TJ(MAX) 150 °C 2
Storage Temperature TSTG -55 150 °C 2
ESD Capability, Human Body Model ESDHBM 2000 V Note 2: tested per AEC-Q100-002 (EIA/JESD22-A114) 2
ESD Capability, Machine Model ESDMM 200 V Note 2: tested per AEC-Q100-003 (EIA/JESD22-A115) 2
Thermal Resistance, Junction-to-Air (SOT-563) RJA 200 °C/W 2

CAD (KiCad official)

  • Symbol: NCP170BXV250T2G
  • Footprint: Package_TO_SOT_SMD:SOT-563
  • 3D model: SOT-563 (KiCad packages3D, STEP)
  • 3D model files: ncp170bxv250t2g-etched.step / ncp170bxv250t2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp170bxv250t2g.step / ncp170bxv250t2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (28 pp, sha256 5cb3e34bc970e809, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF