component
NCP163ASN300T1G
Public Made by Adomby adom
onsemi Linear Voltage Regulators (LDO), SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCP163ASN300T1G
onsemi · Linear Voltage Regulators (LDO) · SOT-23-5L
NCP163ASN300T1G from onsemi, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply pin, operating range 2.2 V to 5.5 V. |
| 2 | GND | power_in | Common ground connection. |
| 3 | EN | input | Chip enable: VEN < 0.4 V disables the regulator and VEN > 1.2 V enables the LDO; internal 200 nA typ pull-down turns the device off if left unconnected. |
| 4 | NC | unconnected | Not connected internally; can be tied to ground plane. |
| 5 | OUT | power_out | Regulated output voltage (3.0 V for this option); the output should be bypassed with a small 1 µF ceramic capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 2.2 | 5.5 | V | 3 | ||
| Output Voltage Accuracy (SOT23-5L only) | VOUT | -2 | 2 | % | VIN = (VOUT(NOM) + 1 V) to 5.5 V, SOT23-5L Package Only | 3 | |
| Line Regulation | LineReg | 0.02 | %/V | VOUT(NOM) + 1 V ≤ VIN ≤ 5.5 V | 3 | ||
| Load Regulation (SOT23-5L) | LoadReg | 0.008 | 0.015 | %/mA | IOUT = 1mA to 250mA, SOT23-5L | 3 | |
| Dropout Voltage (SOT23-5L, 3.0 V) | VDO | 115 | 185 | mV | IOUT = 250 mA, VOUT(NOM) = 3.0 V | 3 | |
| Output Current Limit | ICL | 250 | 700 | mA | VOUT = 90% VOUT(NOM) | 3 | |
| Short Circuit Current | ISC | 690 | mA | VOUT = 0 V | 3 | ||
| Quiescent Current | IQ | 12 | 20 | µA | IOUT = 0 mA | 3 | |
| Shutdown Current | IDIS | 0.01 | 1 | µA | VEN ≤ 0.4 V, VIN = 4.8 V | 3 | |
| EN Input Voltage High | VENH | 1.2 | V | 3 | |||
| EN Input Voltage Low | VENL | 0.4 | V | 3 | |||
| EN Pull Down Current | IEN | 0.2 | 0.5 | µA | VEN = 4.8 V | 3 | |
| Turn-On Time (A option) | 120 | µs | COUT = 1 µF, from assertion of VEN to VOUT = 95% VOUT(NOM), A Option | 3 | |||
| PSRR 1 kHz | PSRR | 92 | dB | IOUT = 20 mA, f = 1 kHz | 3 | ||
| Output Voltage Noise | VN | 6.5 | µVRMS | f = 10 Hz to 100 kHz, IOUT = 250 mA | 4 | ||
| Thermal Shutdown Threshold | TSDH | 160 | °C | Temperature rising | 4 | ||
| Thermal Shutdown Hysteresis Threshold | TSDL | 140 | °C | Temperature falling | 4 | ||
| Active Output Discharge Resistance | RDIS | 280 | Ω | VEN < 0.4 V, Version A only | 4 | ||
| Input Voltage | VIN | -0.3 | 6 | V | 2 | ||
| Output Voltage | VOUT | -0.3 | 6 | V | -0.3 to VIN + 0.3, max. 6 V | 2 | |
| Chip Enable Input | VCE | -0.3 | 6 | V | 2 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature | TSTG | -55 | 150 | °C | 2 | ||
| ESD Human Body Model | ESDHBM | 2000 | V | 2 | |||
| ESD Machine Model | ESDMM | 200 | V | 2 | |||
| ESD Charged Device Model | ESDCDM | 1000 | V | 2 | |||
| Thermal Resistance Junction-to-Air, SOT23-5 | RθJA | 218 | °C/W | JEDEC board JESD51-7 | 3 |
CAD (KiCad official)
- Symbol:
NCP163ASN300T1G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
ncp163asn300t1g-etched.step/ncp163asn300t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp163asn300t1g.step/ncp163asn300t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (25 pp, sha256
f5a7f9bae123b8f8, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).