component
NCP163ASN150T1G
Public Made by Adomby adom
onsemi Linear Voltage Regulators (LDO), SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
NCP163ASN150T1G
onsemi · Linear Voltage Regulators (LDO) · SOT-23-5L
NCP163ASN150T1G from onsemi, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply pin; the datasheet gives VIN from 2.2 V to 5.5 V in operation and an absolute maximum of −0.3 V to 6 V. |
| 2 | GND | power_in | Common ground connection. |
| 3 | EN | input | Chip enable: applying VEN < 0.4 V disables the regulator, and pulling VEN > 1.2 V enables the LDO. |
| 4 | NC | unconnected | Not connected; can be tied to the ground plane. |
| 5 | OUT | power_out | Regulated output voltage; the output should be bypassed with a small 1 F ceramic capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 2.2 | 5.5 | V | 3 | ||
| Output Voltage Accuracy | VOUT | -2 | 2 | % | VIN = (VOUT(NOM) + 1 V) to 5.5 V, SOT23-5L Package Only | 3 | |
| Output Current Limit | ICL | 250 | 700 | mA | VOUT = 90% VOUT(NOM) | 3 | |
| Short Circuit Current | ISC | 690 | mA | VOUT = 0 V | 3 | ||
| Quiescent Current | IQ | 12 | 20 | uA | IOUT = 0 mA | 3 | |
| Shutdown Current | IDIS | 0.01 | 1 | uA | VEN <= 0.4 V, VIN = 4.8 V | 3 | |
| EN Input Voltage High | VENH | 1.2 | V | 3 | |||
| EN Input Voltage Low | VENL | 0.4 | V | 3 | |||
| EN Pull Down Current | IEN | 0.2 | 0.5 | uA | VEN = 4.8 V | 3 | |
| Turn-On Time | 120 | us | COUT = 1 uF, from assertion of VEN to VOUT = 95% VOUT(NOM), A Option | 3 | |||
| Line Regulation | LineReg | 0.02 | %/V | VOUT(NOM) + 1 V <= VIN <= 5.5 V | 3 | ||
| Load Regulation SOT23-5L | LoadReg | 0.008 | 0.015 | %/mA | IOUT = 1 mA to 250 mA | 3 | |
| Power Supply Rejection Ratio at 100 Hz | PSRR | 91 | dB | IOUT = 20 mA, f = 100 Hz | 3 | ||
| Power Supply Rejection Ratio at 1 kHz | PSRR | 92 | dB | IOUT = 20 mA, f = 1 kHz | 3 | ||
| Power Supply Rejection Ratio at 10 kHz | PSRR | 85 | dB | IOUT = 20 mA, f = 10 kHz | 3 | ||
| Power Supply Rejection Ratio at 100 kHz | PSRR | 60 | dB | IOUT = 20 mA, f = 100 kHz | 3 | ||
| Output Voltage Noise at 1 mA | VN | 8 | VRMS | f = 10 Hz to 100 kHz, IOUT = 1 mA | 4 | ||
| Output Voltage Noise at 250 mA | VN | 6.5 | VRMS | f = 10 Hz to 100 kHz, IOUT = 250 mA | 4 | ||
| Thermal Shutdown Threshold Rising | TSDH | 160 | °C | Temperature rising | 4 | ||
| Thermal Shutdown Threshold Falling | TSDL | 140 | °C | Temperature falling | 4 | ||
| Active Output Discharge Resistance | RDIS | 280 | Ohm | VEN < 0.4 V, Version A only | 4 | ||
| Line Transient Low | TranLINE | -1 | mV | VIN = (VOUT(NOM) + 1 V) to (VOUT(NOM) + 1.6 V) in 30 us, IOUT = 1 mA | 4 | ||
| Line Transient High | TranLINE | 1 | mV | VIN = (VOUT(NOM) + 1.6 V) to (VOUT(NOM) + 1 V) in 30 us, IOUT = 1 mA | 4 | ||
| Load Transient Undershoot | TranLOAD | -40 | mV | IOUT = 1 mA to 200 mA in 10 us | 4 | ||
| Load Transient Overshoot | TranLOAD | 40 | mV | IOUT = 200 mA to 1 mA in 10 us | 4 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | Electrical characteristics range | 3 | |
| Input Voltage | VIN | -0.3 | 6 | V | 2 | ||
| Output Voltage | VOUT | -0.3 | 6 | V | VOUT -0.3 to VIN + 0.3, max. 6 V | 2 | |
| Chip Enable Input Voltage | VCE | -0.3 | 6 | V | 2 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature | TSTG | -55 | 150 | °C | 2 | ||
| ESD Capability Human Body Model | ESDHBM | 2000 | V | JESD22-A114 | 2 | ||
| ESD Capability Machine Model | ESDMM | 200 | V | JESD22-A115 | 2 | ||
| ESD Capability Charged Device Model | ESDCDM | 1000 | V | JESD22-C101 | 2 | ||
| Thermal Resistance Junction-to-Air SOT23-5 | RJA | 218 | °C/W | Measured per JEDEC board specification, JESD51-7 | 3 |
CAD (KiCad official)
- Symbol:
NCP163ASN150T1G - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
ncp163asn150t1g-etched.step/ncp163asn150t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp163asn150t1g.step/ncp163asn150t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (25 pp, sha256
f5a7f9bae123b8f8, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCP163ASN150T1G
**onsemi** · Linear Voltage Regulators (LDO) · SOT-23-5L
NCP163ASN150T1G from onsemi, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply pin; the datasheet gives VIN from 2.2 V to 5.5 V in operation and an absolute maximum of −0.3 V to 6 V. |
| 2 | GND | power_in | Common ground connection. |
| 3 | EN | input | Chip enable: applying VEN < 0.4 V disables the regulator, and pulling VEN > 1.2 V enables the LDO. |
| 4 | NC | unconnected | Not connected; can be tied to the ground plane. |
| 5 | OUT | power_out | Regulated output voltage; the output should be bypassed with a small 1 F ceramic capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23-5L |
| Category | Power Management ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Input Voltage | VIN | 2.2 | | 5.5 | V | | 3 |
| Output Voltage Accuracy | VOUT | -2 | | 2 | % | VIN = (VOUT(NOM) + 1 V) to 5.5 V, SOT23-5L Package Only | 3 |
| Output Current Limit | ICL | 250 | | 700 | mA | VOUT = 90% VOUT(NOM) | 3 |
| Short Circuit Current | ISC | | 690 | | mA | VOUT = 0 V | 3 |
| Quiescent Current | IQ | | 12 | 20 | uA | IOUT = 0 mA | 3 |
| Shutdown Current | IDIS | | 0.01 | 1 | uA | VEN <= 0.4 V, VIN = 4.8 V | 3 |
| EN Input Voltage High | VENH | 1.2 | | | V | | 3 |
| EN Input Voltage Low | VENL | | | 0.4 | V | | 3 |
| EN Pull Down Current | IEN | | 0.2 | 0.5 | uA | VEN = 4.8 V | 3 |
| Turn-On Time | | | 120 | | us | COUT = 1 uF, from assertion of VEN to VOUT = 95% VOUT(NOM), A Option | 3 |
| Line Regulation | LineReg | | 0.02 | | %/V | VOUT(NOM) + 1 V <= VIN <= 5.5 V | 3 |
| Load Regulation SOT23-5L | LoadReg | | 0.008 | 0.015 | %/mA | IOUT = 1 mA to 250 mA | 3 |
| Power Supply Rejection Ratio at 100 Hz | PSRR | | 91 | | dB | IOUT = 20 mA, f = 100 Hz | 3 |
| Power Supply Rejection Ratio at 1 kHz | PSRR | | 92 | | dB | IOUT = 20 mA, f = 1 kHz | 3 |
| Power Supply Rejection Ratio at 10 kHz | PSRR | | 85 | | dB | IOUT = 20 mA, f = 10 kHz | 3 |
| Power Supply Rejection Ratio at 100 kHz | PSRR | | 60 | | dB | IOUT = 20 mA, f = 100 kHz | 3 |
| Output Voltage Noise at 1 mA | VN | | 8 | | VRMS | f = 10 Hz to 100 kHz, IOUT = 1 mA | 4 |
| Output Voltage Noise at 250 mA | VN | | 6.5 | | VRMS | f = 10 Hz to 100 kHz, IOUT = 250 mA | 4 |
| Thermal Shutdown Threshold Rising | TSDH | | 160 | | °C | Temperature rising | 4 |
| Thermal Shutdown Threshold Falling | TSDL | | 140 | | °C | Temperature falling | 4 |
| Active Output Discharge Resistance | RDIS | | 280 | | Ohm | VEN < 0.4 V, Version A only | 4 |
| Line Transient Low | TranLINE | -1 | | | mV | VIN = (VOUT(NOM) + 1 V) to (VOUT(NOM) + 1.6 V) in 30 us, IOUT = 1 mA | 4 |
| Line Transient High | TranLINE | | | 1 | mV | VIN = (VOUT(NOM) + 1.6 V) to (VOUT(NOM) + 1 V) in 30 us, IOUT = 1 mA | 4 |
| Load Transient Undershoot | TranLOAD | -40 | | | mV | IOUT = 1 mA to 200 mA in 10 us | 4 |
| Load Transient Overshoot | TranLOAD | | | 40 | mV | IOUT = 200 mA to 1 mA in 10 us | 4 |
| Operating Junction Temperature | TJ | -40 | | 125 | °C | Electrical characteristics range | 3 |
| Input Voltage | VIN | -0.3 | | 6 | V | | 2 |
| Output Voltage | VOUT | -0.3 | | 6 | V | VOUT -0.3 to VIN + 0.3, max. 6 V | 2 |
| Chip Enable Input Voltage | VCE | -0.3 | | 6 | V | | 2 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 2 |
| Storage Temperature | TSTG | -55 | | 150 | °C | | 2 |
| ESD Capability Human Body Model | ESDHBM | | | 2000 | V | JESD22-A114 | 2 |
| ESD Capability Machine Model | ESDMM | | | 200 | V | JESD22-A115 | 2 |
| ESD Capability Charged Device Model | ESDCDM | | | 1000 | V | JESD22-C101 | 2 |
| Thermal Resistance Junction-to-Air SOT23-5 | RJA | | 218 | | °C/W | Measured per JEDEC board specification, JESD51-7 | 3 |
## CAD (KiCad official)
- Symbol: `NCP163ASN150T1G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files: `ncp163asn150t1g-etched.step` / `ncp163asn150t1g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp163asn150t1g.step` / `ncp163asn150t1g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp163asn150t1-d.pdf) (25 pp, sha256 `f5a7f9bae123b8f8`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncp163asn150t1g-datasheet.pdf)