main
Ray
Publish 0.1.0
91b9293
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208
{
"slug": "ncp1612adr2g",
"version": "0.1.0",
"type": "component",
"description": "onsemi AC-DC Controllers & Regulators, SOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management",
"ncp1612adr2g",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ncp1612adr2g.kicad_sym",
"ncp1612adr2g.kicad_mod",
"ncp1612adr2g.glb",
"ncp1612adr2g.step",
"ncp1612adr2g.lbr",
"docs/hero.png",
"docs/ncp1612adr2g-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ncp1612adr2g-hero.glb",
"ncp1612adr2g-hero.overlay.json",
"ncp1612adr2g-etched.glb"
],
"component": {
"mpn": "NCP1612ADR2G",
"manufacturer": "onsemi",
"package": "SOP-10",
"pin_count": 10,
"category": "Power Management",
"subcategory": "AC-DC Controllers & Regulators",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/ba0144bde84b5e1e5fe2688dabb14a99.pdf",
"parts": {
"symbol": "ncp1612adr2g.kicad_sym",
"footprint": "ncp1612adr2g.kicad_mod",
"model_3d": "ncp1612adr2g-hero.glb",
"model_3d_plain": "ncp1612adr2g-etched.glb",
"model_3d_step": "ncp1612adr2g-etched.step",
"model_3d_step_plain": "ncp1612adr2g.step",
"lbr": "ncp1612adr2g.lbr"
},
"distributor_links": {
"lcsc": "C464238",
"digikey": "NCP1612ADR2GOSTR-ND",
"mouser": "863-NCP1612ADR2G"
},
"distributor_check": {
"checked_at": "2026-10-30T16:32:24Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "NCP1612ADR2GOSTR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "863-NCP1612ADR2G",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "FOVP",
"type": "input",
"description": "Fast over-voltage protection input that disables the driver when Vpin1 exceeds the FOVP threshold (2% above the soft OVP reference), also used for UVP2 and BUV detection on A/A1/A3/B versions, with a 250 nA internal sink current to ground if open; absolute maximum -0.3 to +10 V."
},
{
"number": "2",
"name": "Feedback",
"type": "input",
"description": "Receives a portion of the PFC output voltage for regulation, the Dynamic Response Enhancer, soft OVP (above 105% of VREF) and UVP (below 12% of VREF), with a 250 nA internal sink current that disables the part if open; absolute maximum -0.3 to +10 V."
},
{
"number": "3",
"name": "VCONTROL",
"type": "output",
"description": "Error amplifier output where the network to ground sets the regulation loop bandwidth (typically below 20 Hz) and provides soft-start by charging up from ground at startup."
},
{
"number": "4",
"name": "VSENSE",
"type": "input",
"description": "Senses a portion of the instantaneous input voltage for brown-out detection (stops below 0.9 V for more than 50 ms, resumes above 1 V) and line range detection (high-line above 2.2 V, low-line below 1.7 V for more than 25 ms); recommended maximum 4.5 V."
},
{
"number": "5",
"name": "FFcontrol",
"type": "output",
"description": "Sources a current representative of the line current into a resistor to ground, setting critical conduction mode above the 2.5 V reference and a longer dead-time below it, with cycle skipping below 0.65 V."
},
{
"number": "6",
"name": "CS/ZCD",
"type": "input",
"description": "Monitors the MOSFET current for maximum current limiting and, through the auxiliary winding via a diode, detects zero current (core reset); absolute maximum -0.3 to +35 V with +5 mA injected current."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "Ground pin to be connected to the PFC stage ground."
},
{
"number": "8",
"name": "DRV",
"type": "output",
"description": "Totem-pole gate drive output with -0.5/+0.8 A capability for driving high gate charge power MOSFETs."
},
{
"number": "9",
"name": "VCC",
"type": "power_in",
"description": "Positive supply of the IC with operating range 9.5 V up to 35 V after start-up, starting at 10.5 V (A, A1, A2, A3) or 17.0 V (B, B2) and turning off below 9.0 V (typical values)."
},
{
"number": "10",
"name": "pfcOK",
"type": "output",
"description": "Grounded until the PFC output reaches its nominal level or when a fault is detected and high impedance otherwise; NCP1612A, A1, A3 and B latch off if Vpin10 exceeds 7.5 V."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "vision",
"consensus_model": "claude-opus-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet covers six versions (A, B, A1, A2, A3, B2). The MPN NCP1612ADR2G is the A version. The; The datasheet does not state pin electrical types. I assigned them from the descriptions: VCONTROL a",
"vision extraction: provenance cannot be text-verified; needs consensus"
],
"pages_sent": 12,
"cost_usd": 0.5795,
"at": "2026-10-30T16:31:51"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/ba0144bde84b5e1e5fe2688dabb14a99.pdf",
"pages": 33,
"sha256": "41e7fb35aef7ffc6",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 10,
"described": 10,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ncp1612adr2g.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.06,
4.9,
1.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "07127bdb235cef70c33d485168ca4f416c021346ce3fc56319e1ba08e0c1cebd",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ncp1612adr2g-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.06,
4.9,
1.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "d098fb170633b42fbfb3a5f081d408ad7d34a2bc5ce4e1012a8335cc69a98602",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}