Generated by kicad-footprint-generator · KiCad file format 20260206
NCP1592PAR2G
onsemi · DC-DC Converters · TSSOP-28-EP
NCP1592PAR2G from onsemi, in a TSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AGND | power_in | Analog ground return for the compensation network, output divider, slow-start capacitor, VBIAS capacitor, RT resistor and SYNC pin; connect the PowerPAD to AGND. |
| 2 | VSENSE | input | Error amplifier inverting input, connected to the output voltage through the compensation network/output divider. |
| 3 | COMP | output | Error amplifier output; connect the frequency compensation network from COMP to VSENSE. |
| 4 | PWRGD | output | Open-drain power good output, high when VSENSE is at or above 90% of Vref and low otherwise, and also low when SS/ENA is low or internal shutdown is active. |
| 5 | BOOT | output | Bootstrap output; a 0.022 μF to 0.1 μF ceramic capacitor between BOOT and PH generates the floating high-side FET drive. |
| 6 | PH | output | Phase output, the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 7 | PH | output | Phase output, the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 8 | PH | output | Phase output, the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 9 | PH | output | Phase output, the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 10 | PH | output | Phase output, the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 11 | PH | output | Phase output, the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 12 | PH | output | Phase output, the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 13 | PH | output | Phase output, the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 14 | PH | output | Phase output, the junction of the internal high-side and low-side power MOSFETs and the output inductor. |
| 15 | PGND | power_in | Power ground, the high-current return for the low-side driver and power MOSFET; connect with large copper areas and a single point connection to AGND. |
| 16 | PGND | power_in | Power ground, the high-current return for the low-side driver and power MOSFET; connect with large copper areas and a single point connection to AGND. |
| 17 | PGND | power_in | Power ground, the high-current return for the low-side driver and power MOSFET; connect with large copper areas and a single point connection to AGND. |
| 18 | PGND | power_in | Power ground, the high-current return for the low-side driver and power MOSFET; connect with large copper areas and a single point connection to AGND. |
| 19 | PGND | power_in | Power ground, the high-current return for the low-side driver and power MOSFET; connect with large copper areas and a single point connection to AGND. |
| 20 | VIN | power_in | Input supply for the power MOSFET switches and internal bias regulator; bypass to PGND with X5R or higher quality 10 μF ceramic capacitors. |
| 21 | VIN | power_in | Input supply for the power MOSFET switches and internal bias regulator; bypass to PGND with X5R or higher quality 10 μF ceramic capacitors. |
| 22 | VIN | power_in | Input supply for the power MOSFET switches and internal bias regulator; bypass to PGND with X5R or higher quality 10 μF ceramic capacitors. |
| 23 | VIN | power_in | Input supply for the power MOSFET switches and internal bias regulator; bypass to PGND with X5R or higher quality 10 μF ceramic capacitors. |
| 24 | VIN | power_in | Input supply for the power MOSFET switches and internal bias regulator; bypass to PGND with X5R or higher quality 10 μF ceramic capacitors. |
| 25 | VBIAS | power_out | Internal bias voltage output; connect a 0.1 μF to 1.0 μF low-ESR ceramic capacitor between VBIAS and AGND. |
| 26 | SS/ENA | bidirectional | Soft-start/enable pin; a logic input enables or disables operation and a capacitor input sets the start-up time. |
| 27 | SYNC | input | Synchronization input for an external oscillator or for selecting between two internal switching frequencies; a resistor must be connected to RT when synchronizing to an external signal. |
| 28 | RT | input | Frequency setting resistor input; connect a resistor from RT to AGND, set at or slightly below the external oscillator frequency when using SYNC. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSSOP-28-EP |
| Category | Power Supply Chip |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Main supply voltage input | VIN | -0.3 | 7 | V | 5 | ||
| Soft start and enable voltage | SS / ENA | -0.3 | 7 | V | 5 | ||
| Synchronization voltage | SYNC | -0.3 | 7 | V | 5 | ||
| Frequency setting voltage | RT | -0.3 | 6 | V | 5 | ||
| Output divided voltage sense | VSENSE | -0.3 | 4 | V | 5 | ||
| High side drive supply voltage | BOOT | -0.3 | V | Maximum printed as PH+7 V | 5 | ||
| Output voltage range | VBIAS | -0.3 | 7 | V | 5 | ||
| Compensation Voltage | COMP | -0.3 | 7 | V | 5 | ||
| Power Good open collector voltage | PWRGD | -0.3 | 7 | V | 5 | ||
| Power Switching Node Transient voltage excursion | PH | -3 | 10 | V | Note 4: 10 V transients allowed for 10 ns | 5 | |
| Compensation Source current | COMP | 0 | 6 | mA | 5 | ||
| Regulated voltage Source current | VBIAS | 0 | 6 | mA | 5 | ||
| Power Switching node sink current | PH | 0 | 12 | A | 5 | ||
| Compensation Sink current | COMP | 0 | 6 | mA | 5 | ||
| Soft start and enable Sink current | SS/ENA | 0 | 10 | mA | 5 | ||
| Power Good open collector Sink current | PWRGD | 0 | 10 | mA | 5 | ||
| Voltage differential AGND to PGND | -0.3 | 0.3 | V | 5 | |||
| Operating Junction Temperature Range | TJ | -40 | 150 | °C | 5 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 5 | ||
| Storage Temperature Range | Tstg | -55 | 150 | °C | 5 | ||
| Input voltage | VI | 3 | 6 | V | 5 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Maximum Power Dissipation | PD | 5.49 | W | TA = 25°C | 5 | ||
| Thermal Resistance Junction-to-Air with Solder | RJA | 18.2 | °C/W | 5 | |||
| Thermal Resistance Junction-to-Air without Solder | RJA | 40.5 | °C/W | 5 | |||
| VIN Operation Voltage | VIN | 3 | 6 | V | 6 | ||
| Quiescent Current | I(QSW 350) | 3.5 | 11.2 | mA | Fs = 350 kHz, SYNC ≤ 0.8 V, RT open, PH pin open | 6 | |
| Quiescent Current | I(QSW 550) | 4 | 16 | mA | Fs = 550 kHz, SYNC ≥ 2.5 V, RT open, PH pin open | 6 | |
| Quiescent Current in shutdown | I(QSD) | 1 | 1.4 | mA | Shutdown, SS / ENA = 0 V | 6 | |
| Start Threshold | UVLOR | 2.95 | 3 | V | 6 | ||
| Stop Threshold | UVLOF | 2.7 | 2.8 | V | 6 | ||
| UVLO Hysteresis | UVLOHYST | 110 | 160 | mV | 6 | ||
| Bias Output Voltage | Vbias | 2.7 | 2.8 | 2.9 | V | IVbias = 0 | 6 |
| Reference Voltage Accuracy | Vref | 0.882 | 0.891 | 0.9 | V | 6 | |
| Line regulation | 0.04 | %/V | IL = 3 A, Fs = 350 kHz, TJ = 85°C | 6 | |||
| Load regulation | 0.03 | %/A | IL = 0 A to 6 A, Fs = 350 kHz, TJ = 85°C | 6 | |||
| Internally set oscillator frequency low | FREQSYNC_LOW | 280 | 350 | 420 | kHz | SYNC ≤ 0.8 V, RT open | 6 |
| Internally set oscillator frequency high | FREQ_HIGH | 440 | 550 | 660 | kHz | SYNC ≥ 2.5 V, RT open | 6 |
| Externally set oscillator frequency | FREQ180RT | 252 | 280 | 308 | kHz | RT = 180 k (1% resistor to AGND) | 6 |
| Externally set oscillator frequency | FREQ100RT | 460 | 500 | 540 | kHz | RT = 100 k (1% resistor to AGND) | 6 |
| Externally set oscillator frequency | FREQ68RT | 663 | 700 | 762 | kHz | RT = 68 k (1% resistor to AGND) | 6 |
| Frequency range | SYNCFREQ | 330 | 700 | kHz | 6 | ||
| Maximum duty cycle | DMAX | 90 | % | 6 | |||
| Open loop voltage gain | OLG | 90 | 110 | dB | 1 k COMP to AGND (Note 5) | 7 | |
| Unity gain bandwidth | UGBW | 3 | 5 | MHz | Parallel 10 k, 160 pF COMP to AGND (Note 5) | 7 | |
| Input bias current | IVSENSE | 60 | 250 | nA | VSENSE = Vref | 7 | |
| PWM comparator propagation delay time | COMPDLY | 70 | 85 | ns | 10 mV overdrive (Note 5) | 7 | |
| Enable threshold voltage | ENTH | 0.82 | 1.2 | 1.4 | V | 7 | |
| Enable hysteresis voltage | ENHYS | 0.03 | V | 7 | |||
| Internal soft-start time | SSI | 2.18 | 3.35 | 4.1 | ms | 7 | |
| Discharge current | EN_IDSCH | 2.3 | 3.1 | 5.4 | mA | SS/ENA = 1.2 V, VI = 2.7 V | 7 |
| Power good threshold voltage | 90 | %Vref | VSENSE falling | 7 | |||
| Output saturation voltage | PWRGD | 166 | 225 | mV | I(sink) = 2.5 mA | 7 | |
| Current limit trip point | 7.2 | 10 | A | VI = 3 V, output shorted (Note 5) | 7 | ||
| Current limit trip point | 10 | 12 | A | VI = 6 V, Output shorted (Note 5) | 7 | ||
| Current limit leading edge blanking time | 100 | ns | Note 5 | 7 | |||
| Current limit total response time | 200 | ns | Note 5 | 7 | |||
| Thermal shutdown trip point | 135 | 150 | 165 | °C | Note 5 | 7 | |
| Thermal shutdown hysteresis | 10 | °C | Note 5 | 7 | |||
| Power MOSFETs RDS(on) High Side | RDS(on) | 26 | 47 | mΩ | VI = 6 V (Note 8) | 7 | |
| Power MOSFETs RDS(on) High Side | RDS(on) | 30 | 61 | mΩ | VI = 3 V (Note 8) | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | copper areas to the input and output supply returns, and negative terminals of the input and output capacitors. | 4 |
CAD (KiCad official)
- Symbol:
NCP1592PAR2G - Footprint:
Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm - 3D model: TSSOP-28-EP (KiCad packages3D, STEP)
- 3D model files:
ncp1592par2g-etched.step/ncp1592par2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp1592par2g.step/ncp1592par2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (21 pp, sha256
e5ee47234407dbdd, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).