NCP1589AMNTWG

{
  "slug": "ncp1589amntwg",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi DC-DC Converters, DFN-10(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "ncp1589amntwg",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp1589amntwg.kicad_sym",
    "ncp1589amntwg.kicad_mod",
    "ncp1589amntwg.glb",
    "ncp1589amntwg.step",
    "ncp1589amntwg.lbr",
    "docs/hero.png",
    "docs/ncp1589amntwg-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp1589amntwg-hero.glb",
    "ncp1589amntwg-hero.overlay.json",
    "ncp1589amntwg-etched.glb"
  ],
  "component": {
    "mpn": "NCP1589AMNTWG",
    "manufacturer": "onsemi",
    "package": "DFN-10(3x3)",
    "pin_count": 11,
    "category": "Power Management ICs",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1589amntw-d.pdf",
    "parts": {
      "symbol": "ncp1589amntwg.kicad_sym",
      "footprint": "ncp1589amntwg.kicad_mod",
      "model_3d": "ncp1589amntwg-hero.glb",
      "model_3d_plain": "ncp1589amntwg-etched.glb",
      "model_3d_step": "ncp1589amntwg-etched.step",
      "model_3d_step_plain": "ncp1589amntwg.step",
      "lbr": "ncp1589amntwg.lbr"
    },
    "distributor_links": {
      "lcsc": "C463125"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T18:22:31Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 886 calls left today"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "BOOT",
        "type": "power_in",
        "description": "Supply rail for the floating top gate driver, fed through an external diode (cathode to BOOT) with a 0.1 µF to 1 µF CBOOT capacitor to LX placed near the IC; rated 35 V wrt GND maximum."
      },
      {
        "number": "2",
        "name": "LX",
        "type": "passive",
        "description": "Switch node and reference for the floating top gate driver, connected to the source of the top MOSFET and used to sense the low-side MOSFET drop for overcurrent protection."
      },
      {
        "number": "3",
        "name": "UG",
        "type": "output",
        "description": "Top gate MOSFET driver output, connected to the gate of the top N-channel MOSFET."
      },
      {
        "number": "4",
        "name": "LG",
        "type": "output",
        "description": "Bottom gate MOSFET driver output, connected to the gate of the bottom N-channel MOSFET; it also sources 10 µA at startup into the ROCSET resistor to ground to set the overcurrent threshold."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "IC ground reference to which all control circuits are referenced."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply rail for the internal circuitry, operating range 4.5 V to 13.2 V, decoupled with a 1 µF capacitor to GND placed near the IC."
      },
      {
        "number": "7",
        "name": "COMP/DISB",
        "type": "bidirectional",
        "description": "Error amplifier output and PWM comparator non-inverting input used with FB to compensate the voltage-control loop; pull low to disable the device."
      },
      {
        "number": "8",
        "name": "FB",
        "type": "input",
        "description": "Inverting input of the error amplifier, connected to the output resistor divider or directly to Vout, regulated to 0.8 V; maximum 5.0 V."
      },
      {
        "number": "9",
        "name": "VOS",
        "type": "input",
        "description": "Voltage offset sense input monitored for power good, overvoltage and undervoltage; regulated to 0.8 V like FB, maximum 5.0 V."
      },
      {
        "number": "10",
        "name": "PGOOD",
        "type": "output",
        "description": "Open-drain power good output with no internal pull-up, pulled low if VOS is outside ±10% of the 0.8 V Vref; maximum 7 V."
      },
      {
        "number": "11",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The package drawing (page 10) shows an exposed pad (D2 x E2) but the datasheet does not give it a pi; The datasheet does not state electrical pin types. The types here are inferred from the descriptions; The ordering table lists NCP1589AMNTWG, but the datasheet states no pinout difference between the A "
        ],
        "pages_sent": 10,
        "cost_usd": 0.1111,
        "at": "2026-10-23T18:22:15"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/ncp1589amntw-d.pdf",
        "pages": 10,
        "sha256": "4cfcc6af5f821801",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncp1589amntwg.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp1589amntwg-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a0c201448594970ca1fb596dd13d98674dc64af5592cc21c73aa8c1057d2af60",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}