main
Ray
ncp1380bdr2g: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
4bb817e
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206
{
"schema_version": 1,
"type": "component",
"slug": "ncp1380bdr2g",
"title": "NCP1380BDR2G",
"brief": "onsemi AC-DC Controllers and Regulators, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.2.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"pmic",
"ncp1380bdr2g"
],
"component": {
"mpn": "NCP1380BDR2G",
"manufacturer": "onsemi",
"package": "SOIC-8",
"pin_count": 8,
"category": "PMIC",
"subcategory": "AC-DC Controllers and Regulators",
"datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1380b-d.pdf",
"parts": {
"symbol": "ncp1380bdr2g.kicad_sym",
"footprint": "ncp1380bdr2g.kicad_mod",
"model_3d": "ncp1380bdr2g-etched.glb",
"model_3d_plain": "ncp1380bdr2g.glb",
"model_3d_step": "ncp1380bdr2g-etched.step",
"model_3d_step_plain": "ncp1380bdr2g.step",
"lbr": "ncp1380bdr2g.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "ZCD",
"type": "input",
"description": "Zero Crossing Detection. Connected to the transformer auxiliary winding to detect the core reset event for quasi-resonant valley switching. Also adjusts the over power protection: injecting a negative voltage smaller than 0.3 V on this pin performs over power protection."
},
{
"number": "2",
"name": "FB",
"type": "input",
"description": "Feedback pin. Hooking an optocoupler collector to this pin allows output regulation via direct optocoupler connection."
},
{
"number": "3",
"name": "CS",
"type": "input",
"description": "Current sense. This pin monitors the primary MOSFET peak current via an external sense resistor for cycle-by-cycle current-mode control."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "The controller ground reference."
},
{
"number": "5",
"name": "DRV",
"type": "output",
"description": "Driver output to an external power MOSFET gate. Provides +500 mA / -800 mA peak source/sink capability with an internal clamp for gate protection."
},
{
"number": "6",
"name": "VCC",
"type": "power_in",
"description": "Supplies the controller. Connected to an external auxiliary winding supply. Extended VCC range operation up to 28 V."
},
{
"number": "7",
"name": "Fault",
"type": "input",
"description": "Over voltage and Over temperature protection input on A and B versions (this NCP1380B variant). Pulling this pin down with an NTC or up with a zener diode allows to latch the controller. On C and D versions this pin instead observes the HV rail for Brown-Out and OVP."
},
{
"number": "8",
"name": "CT",
"type": "passive",
"description": "Timing capacitor pin. A capacitor connected here sets the timing capacitor value used in frequency foldback mode at light load."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://www.onsemi.com/pdf/datasheet/ncp1380b-d.pdf",
"pages": 26,
"sha256": "0f75b6f5439c7249",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ncp1380bdr2g.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ncp1380bdr2g-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "7c601884ef576afe8bf8b196f3e6a1c77f51ce203a5cccabdd0cd85f96ca5f6c",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "onsemi",
"Package": "SOIC-8",
"Category": "PMIC",
"Pins": "8"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"ncp1380bdr2g"
],
"discovery_pitch": "NCP1380BDR2G (onsemi) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ncp1380bdr2g.kicad_sym",
"ncp1380bdr2g.kicad_mod",
"ncp1380bdr2g.glb",
"ncp1380bdr2g.step",
"ncp1380bdr2g-etched.step",
"ncp1380bdr2g.lbr",
"docs/hero.png",
"docs/ncp1380bdr2g-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "NCP1380ADR2G",
"kind": "unknown"
},
{
"mpn": "NCP1380BDR2G",
"kind": "packaging"
},
{
"mpn": "NCP1380CDR2G",
"kind": "unknown"
},
{
"mpn": "NCP1380DDR2G",
"kind": "unknown"
}
],
"updated_at": "2026-09-25T02:55:12.012Z"
}