Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
NCP1361EABAYSNT1G
onsemi · Power Modules · TSOP-6
NCP1361EABAYSNT1G from onsemi, in a TSOP-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Connected to an external auxiliary voltage that supplies the controller; continuous voltage -0.3 to 28 V, driving pulses authorized at VCC(on) 18 V typ and stopped at VCC(off) 6.5 V typ. |
| 2 | GND | power_in | Ground reference for the controller. |
| 3 | DRV | output | Controller switch driver output for the MOSFET gate, with a clamped gate-drive voltage and a current range of -300 mA to +500 mA. |
| 4 | CS | input | Monitors the primary peak current, with a current sense threshold VILIM of 0.80 V typ and a maximum pin voltage of 5.5 V. |
| 5 | FB | input | Connects to an optocoupler collector and adjusts the peak current setpoint, with a maximum pin voltage of 5.5 V. |
| 6 | VS/ZCD | power_in | Connected to the auxiliary winding; senses the output voltage for primary regulation and detects the core reset event for Quasi-Resonant operation, with a maximum pin voltage of 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSOP-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Power Supply voltage, VCC pin, continuous | VCC(MAX) | -0.3 | 28 | V | 4 | ||
| Maximum slew rate on VCC pin during startup | dVCC/dt | 0.4 | V/ms | startup phase | 4 | ||
| Maximum current for DRV pin | IDRV(MAX) | -300 | 500 | mA | 4 | ||
| Maximum voltage on low power pins (except DRV and VCC) | VMAX | -0.3 | 5.5 | V | 4 | ||
| Current range for low power pins (except DRV and VCC) | IMAX | -2 | 5 | mA | 4 | ||
| Thermal Resistance Junction-to-Air | RJ-A | 200 | °C/W | 4 | |||
| Maximum Junction Temperature | TJ(MAX) | 150 | °C | 4 | |||
| Operating Temperature Range | -40 | 125 | °C | 4 | |||
| Storage Temperature Range | -60 | 150 | °C | 4 | |||
| ESD Human Body Model | 2 | kV | JEDEC JESD22-A114F | 4 | |||
| ESD Machine Model | 200 | V | All pins except DRV, JESD22-A115C | 4 | |||
| ESD Charged-Device Model | 500 | V | JESD22-C101E | 4 | |||
| VCC level at which driving pulses are authorized | VCC(on) | 16 | 18 | 20 | V | VCC increasing | 5 |
| VCC level at which driving pulses are stopped | VCC(off) | 6 | 6.5 | 7 | V | VCC decreasing | 5 |
| Over Voltage Protection threshold | VCC(OVP) | 24 | 26 | 28 | V | Over Voltage threshold | 5 |
| Start-up supply current, controller disabled or latched | ICC1 | 2.5 | 5 | µA | VCC < VCC(on) & VCC increasing from 0 V | 5 | |
| Internal IC consumption, steady state | ICC2 | 1.7 | 2.5 | mA | Fsw = 65 kHz, CDRV = 1 nF | 5 | |
| Internal IC consumption, frequency foldback mode | ICC3 | 0.8 | 1.2 | mA | VCO mode, Fsw = 1 kHz, CDRV = 1 nF | 5 | |
| Current Sense Voltage Threshold | VILIM | 0.76 | 0.8 | 0.84 | V | VComp = VComp(max), VCS increasing | 5 |
| Cycle by Cycle Leading Edge Blanking Duration | tLEB1 | 250 | 300 | 360 | ns | options NCP1366AABAY, NCP1366BABAY, NCP1361AABAY, NCP1361BABAY and NCP1361EABAY | 5 |
| Current Sense Propagation Delay | tILIM | 50 | 100 | ns | VCS > (VILIM+ 100 mV) to DRV turn-off | 6 | |
| Timer Delay Before Latching in Overload Condition | TOCP | 50 | 70 | 90 | ms | When CS pin ≥ VILIM (Note 3) | 6 |
| Threshold for Immediate Fault Protection Activation | VCS(stop) | 1.08 | 1.2 | 1.32 | V | 6 | |
| Internal Voltage reference for Constant Current regulation | Vref_CC | 0.98 | 1 | 1.02 | V | TJ = 25°C | 6 |
| Internal Voltage reference for Constant Current regulation | Vref_CC | 0.97 | 1 | 1.03 | V | -40°C < TJ < 125°C | 6 |
| Minimal difference between any two valleys | VH | 176 | mV | VComp increasing or VComp decreasing | 6 | ||
| VZCD threshold voltage | VZCD(TH) | 25 | 45 | 65 | mV | VZCD decreasing | 6 |
| VZCD Hysteresis | VZCD(HYS) | 15 | 30 | 45 | mV | VZCD increasing | 6 |
| Threshold for output short circuit or aux. winding short circuit detection | VZCD(short) | 30 | 50 | 70 | mV | After tBLANK_ZCD if VZCD < VZCD(short) | 7 |
| Propagation Delay from valley detection to DRV high | tDEM | 170 | ns | VZCD decreasing from 4 V to 0 V | 7 | ||
| Blanking delay after on-time | tblank_ZCD | 1.2 | 1.5 | 1.8 | µs | 7 | |
| Timeout while in Soft-start | toutSS | 36 | 44 | 52 | µs | Timeout after last demagnetization transition | 7 |
| Timeout after soft-start complete | tout | 4.5 | 5.5 | 6.5 | µs | Timeout after last demagnetization transition | 7 |
| Input leakage current | IZCD | 0.1 | µA | VCC > VCC(on) VZCD = 4 V, DRV is low | 7 | ||
| Rise time | tr | 45 | 80 | ns | CDRV = 1 nF, from 10% to 90% | 7 | |
| Fall time | tf | 30 | 60 | ns | CDRV = 1 nF, from 90% to 10% | 7 | |
| DRV Low voltage | VDRV(low) | 6 | V | VCC = VCC(off) + 0.2 V, CDRV = 220 pF, RDRV = 33 kΩ | 7 | ||
| DRV High voltage | VDRV(high) | 13 | V | VCC = VCC(OVP)-0.2 V, CDRV = 220 pF, RDRV = 33 kΩ | 7 | ||
| Internal Fixed Soft Start Duration | tSS | 3 | 4 | 5 | ms | Current Sense peak current rising from 0.2 V to 0.8 V | 7 |
| Fault level detection for OVP | VOVP | 3.4 | 3.6 | 3.8 | V | Internal sampled Vout increasing, VOVP = Vref_CV2+26%, Version E | 7 |
| Fault level detection for UVP | VUVP | 0.7 | 0.75 | 0.8 | V | Internal sampled Vout decreasing, Fault Mode Option Version E | 7 |
| CS pin Open detection | VCS(open) | 0.8 | V | CS pin open | 8 | ||
| CS pin Short detection | VCS_min | 50 | 70 | mV | 8 | ||
| Thermal Shutdown | TSHTDN | 150 | °C | Device switching (Fsw ~ 65 kHz) (Note 4) | 7 | ||
| Thermal Shutdown Hysteresis | TSHTDN(HYS) | 40 | °C | Device switching (Fsw ~ 65 kHz) (Note 4) | 7 |
CAD (KiCad official)
- Symbol:
NCP1361EABAYSNT1G - Footprint:
Package_SO:TSOP-6_1.65x3.05mm_P0.95mm - 3D model: TSOP-6 (KiCad packages3D, STEP)
- 3D model files:
ncp1361eabaysnt1g-etched.step/ncp1361eabaysnt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp1361eabaysnt1g.step/ncp1361eabaysnt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (29 pp, sha256
9aa63144b45737c1, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).