main
Ray ncp1336bdr2g: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) a89cfe2
{
  "schema_version": 1,
  "type": "component",
  "slug": "ncp1336bdr2g",
  "title": "NCP1336BDR2G",
  "brief": "onsemi AC-DC Controllers and Regulators, SOIC-13. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "ncp1336bdr2g"
  ],
  "component": {
    "mpn": "NCP1336BDR2G",
    "manufacturer": "onsemi",
    "package": "SOIC-13",
    "pin_count": 14,
    "category": "PMIC",
    "subcategory": "AC-DC Controllers and Regulators",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2003121414_onsemi-NCP1336BDR2G_C457724.pdf",
    "parts": {
      "symbol": "ncp1336bdr2g.kicad_sym",
      "footprint": "ncp1336bdr2g.kicad_mod",
      "model_3d": "ncp1336bdr2g-etched.glb",
      "model_3d_plain": "ncp1336bdr2g.glb",
      "model_3d_step": "ncp1336bdr2g-etched.step",
      "model_3d_step_plain": "ncp1336bdr2g.step",
      "lbr": "ncp1336bdr2g.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "OPP",
        "type": "input",
        "description": "Over Power Protection adjust. A negative voltage applied here reduces the internal maximum peak current setpoint. Connect via a resistor divider to an auxiliary winding for OPP compensation; ground to disable. Max negative operating voltage -300 mV."
      },
      {
        "number": "2",
        "name": "OTP",
        "type": "input",
        "description": "Over-Temperature Protection input. Connect an NTC between this pin and GND; an internal current source biases the NTC. When the NTC pulls this pin down, the circuit permanently latches off."
      },
      {
        "number": "3",
        "name": "Timer",
        "type": "passive",
        "description": "Fault timer duration select. Wiring a capacitor from this pin to ground sets the timer duration for fault handling."
      },
      {
        "number": "4",
        "name": "ZCD",
        "type": "input",
        "description": "Zero Crossing / demagnetization Detection. Connected to the auxiliary winding (via a resistor) to detect the core reset event for quasi-resonant valley switching. Vmax -0.3 to +10 V DC, +12 V pulsed."
      },
      {
        "number": "5",
        "name": "Ct",
        "type": "passive",
        "description": "Timing Capacitor. A capacitor from this pin to ground sets the frequency foldback timing (acts as the timing capacitor in foldback mode)."
      },
      {
        "number": "6",
        "name": "FB",
        "type": "input",
        "description": "Feedback pin. Connect the optocoupler collector here for output regulation via the internal pull-up."
      },
      {
        "number": "7",
        "name": "CS",
        "type": "input",
        "description": "Current Sense input. Monitors the primary MOSFET peak current via the sense resistor for cycle-by-cycle current-mode control and OCP."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Controller ground reference for all internal circuitry."
      },
      {
        "number": "9",
        "name": "DRV",
        "type": "output",
        "description": "Gate driver output to the external power MOSFET. Peak source/sink capability -500 mA / +800 mA. Max voltage VCC + 1.0 V."
      },
      {
        "number": "10",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply pin for the controller, fed by the auxiliary winding after startup. Max continuous voltage 28 V, max current ±30 mA."
      },
      {
        "number": "11",
        "name": "BO",
        "type": "input",
        "description": "Brownout input. Sensed against the bulk-rail resistor divider; stops circuit operation when mains input is too low."
      },
      {
        "number": "12",
        "name": "OVP",
        "type": "input",
        "description": "Over-Voltage Protection input. Pulling this pin high permanently latches off the controller."
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection. Pin is omitted from the package for improved creepage distance between HV (pin 14) and adjacent low-voltage pins."
      },
      {
        "number": "14",
        "name": "HV",
        "type": "power_in",
        "description": "High-Voltage startup input. Connect to the bulk capacitor rail to power the internal high-voltage current source that delivers startup current to VCC. Voltage range -0.3 to 500 V."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2003121414_onsemi-NCP1336BDR2G_C457724.pdf",
        "pages": 26,
        "sha256": "d28ee456f629ead0",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncp1336bdr2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp1336bdr2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "1caddca726b21ed974ce6f246cd4a0ae1823cdb0f975fd65f7efba1a0fea705a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "onsemi",
      "Package": "SOIC-13",
      "Category": "PMIC",
      "Pins": "14"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ncp1336bdr2g"
  ],
  "discovery_pitch": "NCP1336BDR2G (onsemi) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp1336bdr2g.kicad_sym",
    "ncp1336bdr2g.kicad_mod",
    "ncp1336bdr2g.glb",
    "ncp1336bdr2g.step",
    "ncp1336bdr2g.lbr",
    "docs/hero.png",
    "docs/ncp1336bdr2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp1336bdr2g-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "NCP1336BDR2G",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-25T02:54:46.668Z"
}