NCP12400BBEBA0DR2G

{
  "schema_version": 1,
  "type": "component",
  "slug": "ncp12400bbeba0dr2g",
  "title": "NCP12400BBEBA0DR2G",
  "brief": "onsemi AC-DC Controllers & Regulators, SOIC-7. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management ics",
    "ncp12400bbeba0dr2g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "NCP12400BBEBA0DR2G",
    "manufacturer": "onsemi",
    "package": "SOIC-7",
    "pin_count": 7,
    "category": "Power Management ICs",
    "subcategory": "AC-DC Controllers & Regulators",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp12400bbeba0-d.pdf",
    "parts": {
      "symbol": "ncp12400bbeba0dr2g.kicad_sym",
      "footprint": "ncp12400bbeba0dr2g.kicad_mod",
      "model_3d": "ncp12400bbeba0dr2g-hero.glb",
      "model_3d_plain": "ncp12400bbeba0dr2g-etched.glb",
      "model_3d_step": "ncp12400bbeba0dr2g-etched.step",
      "model_3d_step_plain": "ncp12400bbeba0dr2g.step",
      "lbr": "ncp12400bbeba0dr2g.lbr"
    },
    "distributor_links": {
      "lcsc": "C904409"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T22:13:09Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 772 calls left today"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FAULT",
        "type": "input",
        "description": "Fault input that stops the controller when pulled up or down, with an internal current source allowing direct NTC connection for over temperature detection; restarts in autorecovery or latches depending on option."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Feedback input driven by an optocoupler connected to ground for output regulation; pulling it to GND puts the part into the low consumption Off mode."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Current sense input for current-mode operation that offers an overpower compensation adjustment and also implements over voltage protection."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "The controller ground."
      },
      {
        "number": "5",
        "name": "DRV",
        "type": "output",
        "description": "Drive output for the external MOSFET, with 300/500 mA source/sink peak current capability."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply input accepting up to 28 Vdc with overvoltage detection, connected to an external auxiliary voltage."
      },
      {
        "number": "8",
        "name": "HV",
        "type": "passive",
        "description": "High-voltage pin connected to the rectified ac line for start-up current source, self-supply, brown-out detection, X2 capacitor discharge and HV sensing for overpower protection; must not be connected to a dc voltage."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: SOIC-7 package has pin 7 removed (no pin 7 listed in datasheet pin table; package drawing labels it ; HV pin type chosen as passive since it is a high-voltage line-connected pin with multiple functions;"
        ],
        "pages_sent": 8,
        "cost_usd": 0.0861,
        "at": "2026-10-23T22:13:00"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/ncp12400bbeba0-d.pdf",
        "pages": 47,
        "sha256": "5b6a98e6b6537aad",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncp12400bbeba0dr2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.4,
          4.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4c9435ffd3683a4ae45655e397c25900eda4f6782a526780f4f7b7b99a32dca7",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp12400bbeba0dr2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.4,
          4.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "962f681f690c73b4679eb6545ad0bd8dd6117cc3ab7506313d2dc3b9eb9532b8",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "onsemi",
      "Package": "SOIC-7",
      "Category": "Power Management ICs",
      "Pins": "7"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "5b6a98e6b6537aad8f3548e90d2967bfd501026744f37b35e28b8af40cd39651",
      "rows": [
        {
          "name": "DRV pin voltage",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 20,
          "conditions": "Pin 5",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "VCC supply voltage continuous",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 36,
          "conditions": "Pin 6",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "HV pin voltage",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 750,
          "conditions": "Pin 8",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Low power pins voltage",
          "symbol": "Vmax",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 5.5,
          "conditions": "Except pin 5, pin 6 and pin 8",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Operating junction temperature",
          "symbol": "TJMAX",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature range",
          "symbol": "TSTRGMAX",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -60,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance junction-to-air, low conductivity PCB",
          "symbol": "RJ-A",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 162,
          "max": null,
          "conditions": "SOIC-7, 50 mm2 copper",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance junction-to-air, medium conductivity PCB",
          "symbol": "RJ-A",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 147,
          "max": null,
          "conditions": "SOIC-7, 100 mm2 copper",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance junction-to-air, high conductivity PCB",
          "symbol": "RJ-A",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 115,
          "max": null,
          "conditions": "SOIC-7, 650 mm2 copper",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance junction-to-case",
          "symbol": "RJ-C",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 73,
          "max": null,
          "conditions": "SOIC-7",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Minimum voltage for current source operation",
          "symbol": "VHV(min)",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 30,
          "max": 40,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "HV current source current out of VCC pin",
          "symbol": "Istart1",
          "kind": "electrical",
          "unit": "mA",
          "min": 0.2,
          "typ": 0.5,
          "max": 0.8,
          "conditions": "VCC = 0 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "HV current source current out of VCC pin",
          "symbol": "Istart2",
          "kind": "electrical",
          "unit": "mA",
          "min": 5,
          "typ": 8,
          "max": 11,
          "conditions": "VCC = VCC(on) - 0.5 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Off-state leakage current",
          "symbol": "Istart(off)",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": 2,
          "max": 6,
          "conditions": "VHV = 750 V, VCC = 15 V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Turn-on threshold level, VCC going up",
          "symbol": "VCC(on)",
          "kind": "electrical",
          "unit": "V",
          "min": 11,
          "typ": 12,
          "max": 13,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "HV current source restart threshold",
          "symbol": "VCC(min)",
          "kind": "electrical",
          "unit": "V",
          "min": 9.5,
          "typ": 10.5,
          "max": 11.5,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Turn-off threshold",
          "symbol": "VCC(off)",
          "kind": "electrical",
          "unit": "V",
          "min": 8.4,
          "typ": 8.9,
          "max": 9.3,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Overvoltage threshold",
          "symbol": "VCC(ovp)",
          "kind": "electrical",
          "unit": "V",
          "min": 25,
          "typ": 26.5,
          "max": 28,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Blanking duration on VCC(off) and VCC(ovp) detection",
          "symbol": "tVCC(blank)",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": 10,
          "max": null,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "VCC decreasing level at which internal logic resets",
          "symbol": "VCC(reset)",
          "kind": "electrical",
          "unit": "V",
          "min": 4.8,
          "typ": 7,
          "max": 7.7,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "VCC level for ISTART1 to ISTART2 transition",
          "symbol": "VCC(inhibit)",
          "kind": "electrical",
          "unit": "V",
          "min": 1,
          "typ": 2.1,
          "max": 3,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Internal current consumption",
          "symbol": "ICC1",
          "kind": "electrical",
          "unit": "mA",
          "min": 1,
          "typ": 1.3,
          "max": 2,
          "conditions": "DRV open, VFB = 3 V, 65 kHz",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Internal current consumption",
          "symbol": "ICC3",
          "kind": "electrical",
          "unit": "mA",
          "min": 1.5,
          "typ": 2.1,
          "max": 2.9,
          "conditions": "Cdrv = 1 nF, VFB = 3 V, 65 kHz",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Internal current consumption, skip or before start-up",
          "symbol": "ICC5",
          "kind": "electrical",
          "unit": "µA",
          "min": 400,
          "typ": 500,
          "max": 650,
          "conditions": "Skip or before start-up",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Brown-out start threshold (option B)",
          "symbol": "VHV(start)",
          "kind": "electrical",
          "unit": "V",
          "min": 102,
          "typ": 111,
          "max": 120,
          "conditions": "VHV going up",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Brown-out stop threshold (option B)",
          "symbol": "VHV(stop)",
          "kind": "electrical",
          "unit": "V",
          "min": 94,
          "typ": 103,
          "max": 116,
          "conditions": "VHV going down",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Comparator hysteresis observed at HV pin",
          "symbol": "VHV(hyst)",
          "kind": "electrical",
          "unit": "V",
          "min": 2,
          "typ": 3,
          "max": 4,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Timer duration for no line detection",
          "symbol": "tDET",
          "kind": "timing",
          "unit": "ms",
          "min": 21,
          "typ": 32,
          "max": 43,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Discharge timer duration",
          "symbol": "tDIS",
          "kind": "timing",
          "unit": "ms",
          "min": 21,
          "typ": 32,
          "max": 43,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Shunt regulator voltage at VCC pin during X2 discharge",
          "symbol": "VCC(dis)",
          "kind": "electrical",
          "unit": "V",
          "min": 10,
          "typ": 11,
          "max": 12,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Oscillator frequency 65 kHz version",
          "symbol": "fOSC",
          "kind": "electrical",
          "unit": "kHz",
          "min": 61,
          "typ": 65,
          "max": 69,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Maximum duty-ratio",
          "symbol": "DMAX",
          "kind": "electrical",
          "unit": "%",
          "min": 75,
          "typ": 80,
          "max": 85,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Frequency jittering amplitude",
          "symbol": "Ajitter",
          "kind": "electrical",
          "unit": "kHz",
          "min": -5,
          "typ": null,
          "max": 5,
          "conditions": "Printed ±3.0 / ±4.0 / ±5.0",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Frequency jittering modulation frequency",
          "symbol": "Fjitter",
          "kind": "electrical",
          "unit": "Hz",
          "min": 85,
          "typ": 125,
          "max": 165,
          "conditions": "",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "FB threshold below which foldback starts",
          "symbol": "VFB(foldS)",
          "kind": "electrical",
          "unit": "V",
          "min": 2.4,
          "typ": 2.5,
          "max": 2.6,
          "conditions": "TJ = 25°C",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "FB threshold below which foldback is complete",
          "symbol": "VFB(foldE)",
          "kind": "electrical",
          "unit": "V",
          "min": 2.05,
          "typ": 2.15,
          "max": 2.25,
          "conditions": "TJ = 25°C",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Minimum switching frequency",
          "symbol": "fOSC(min)",
          "kind": "electrical",
          "unit": "kHz",
          "min": 25,
          "typ": 28,
          "max": 31,
          "conditions": "VFB = Vskip(in) + 0.1",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Rise time, 10 to 90% of VCC",
          "symbol": "trise",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 40,
          "max": 70,
          "conditions": "VCC = VCC(off) + 0.2 V, CDRV = 1 nF",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Fall time, 90 to 10% of VCC",
          "symbol": "tfall",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 30,
          "max": 60,
          "conditions": "VCC = VCC(off) + 0.2 V, CDRV = 1 nF",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Drive current capability source",
          "symbol": "IDRV(source)",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 300,
          "max": null,
          "conditions": "DRV high, VDRV = 0 V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Drive current capability sink",
          "symbol": "IDRV(sink)",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 500,
          "max": null,
          "conditions": "DRV low, VDRV = VCC",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Clamping voltage (maximum gate voltage)",
          "symbol": "VDRV(clamp)",
          "kind": "electrical",
          "unit": "V",
          "min": 10,
          "typ": 12,
          "max": 14,
          "conditions": "VCC = VCC(ovp) - 0.2 V, DRV high, RDRV = 33 k, Cload = 220 pF",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "High-state voltage drop",
          "symbol": "VDRV(drop)",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "VCC = VCC(min) + 0.2 V, RDRV = 33 k, DRV high",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Maximum internal current setpoint",
          "symbol": "VILIM",
          "kind": "electrical",
          "unit": "V",
          "min": 0.66,
          "typ": 0.7,
          "max": 0.74,
          "conditions": "VFB > 3.5 V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Propagation delay from VIlimit detection to DRV off",
          "symbol": "tdelay",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": 50,
          "max": 70,
          "conditions": "VCS = VILIM",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Leading edge blanking duration for VILIM",
          "symbol": "tLEB",
          "kind": "timing",
          "unit": "ns",
          "min": 180,
          "typ": 250,
          "max": 320,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Threshold for immediate fault protection activation",
          "symbol": "VCS(stop)",
          "kind": "electrical",
          "unit": "V",
          "min": 0.95,
          "typ": 1.05,
          "max": 1.15,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Leading edge blanking duration for VCS(stop)",
          "symbol": "tBCS",
          "kind": "timing",
          "unit": "ns",
          "min": 75,
          "typ": 120,
          "max": 150,
          "conditions": "Guaranteed by design",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Soft-start duration (option B)",
          "symbol": "tSSTART",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": 10,
          "max": 13,
          "conditions": "From 1st pulse to VCS = VILIM",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Frozen current setpoint (option E)",
          "symbol": "VI(freeze)",
          "kind": "electrical",
          "unit": "mV",
          "min": 145,
          "typ": 210,
          "max": 270,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Over voltage protection threshold when DRV is low",
          "symbol": "VOVP(CS)",
          "kind": "electrical",
          "unit": "V",
          "min": 1,
          "typ": 1.05,
          "max": 1.1,
          "conditions": "VCS going up",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Blanking duration on OVP detection",
          "symbol": "tOVP,CS",
          "kind": "timing",
          "unit": "µs",
          "min": 0.7,
          "typ": 1,
          "max": 1.3,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Internal pull-up resistor",
          "symbol": "RFB(up)",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 30,
          "typ": 40,
          "max": 50,
          "conditions": "TJ = 25°C",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Internal pull-up voltage on the FB pin",
          "symbol": "VFB(ref)",
          "kind": "electrical",
          "unit": "V",
          "min": 4.5,
          "typ": 5,
          "max": 5.5,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Skip mode threshold, VFB going down",
          "symbol": "Vskip(in)",
          "kind": "electrical",
          "unit": "V",
          "min": 0.9,
          "typ": 1,
          "max": 1.1,
          "conditions": "VFB going down, TJ = 25°C",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Skip mode threshold, VFB going up",
          "symbol": "Vskip(out)",
          "kind": "electrical",
          "unit": "V",
          "min": 1.05,
          "typ": 1.15,
          "max": 1.25,
          "conditions": "VFB going up, TJ = 25°C",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Skip out delay",
          "symbol": "tskip",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 38,
          "conditions": "",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Voltage below which the part enters the off mode",
          "symbol": "VOFF",
          "kind": "electrical",
          "unit": "V",
          "min": 0.5,
          "typ": 0.6,
          "max": 0.7,
          "conditions": "VCC > VCC(off)",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Minimum hysteresis between VON and VOFF",
          "symbol": "VHYST",
          "kind": "electrical",
          "unit": "mV",
          "min": 500,
          "typ": null,
          "max": null,
          "conditions": "VCC > VCC(off), VHV = 60 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Go To Off mode timer",
          "symbol": "tGTOM",
          "kind": "timing",
          "unit": "ms",
          "min": 400,
          "typ": 500,
          "max": 600,
          "conditions": "VCC > VCC(off)",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Fault timer duration",
          "symbol": "tfault",
          "kind": "timing",
          "unit": "ms",
          "min": 108,
          "typ": 128,
          "max": 178,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Fault timer reset time",
          "symbol": "tfault,res",
          "kind": "timing",
          "unit": "µs",
          "min": 150,
          "typ": 200,
          "max": 250,
          "conditions": "VCS < 0.7 V, D < 90% DMAX",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Autorecovery mode latch-off time duration",
          "symbol": "tautorec",
          "kind": "timing",
          "unit": "s",
          "min": 0.85,
          "typ": 1,
          "max": 1.35,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Fault input high threshold",
          "symbol": "VOVP",
          "kind": "electrical",
          "unit": "V",
          "min": 2.43,
          "typ": 2.5,
          "max": 2.57,
          "conditions": "VLatch going up",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Fault input low threshold",
          "symbol": "VOTP",
          "kind": "electrical",
          "unit": "V",
          "min": 0.38,
          "typ": 0.4,
          "max": 0.42,
          "conditions": "VLatch going down, TJ = 25°C",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "OTP resistance threshold (TJ = 25°C)",
          "symbol": "ROTP",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 7.6,
          "typ": 8,
          "max": 8.5,
          "conditions": "External NTC resistance is going down",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Current source for direct NTC connection, normal operation",
          "symbol": "INTC",
          "kind": "electrical",
          "unit": "µA",
          "min": 30,
          "typ": 50,
          "max": 70,
          "conditions": "VLatch = 0.2 V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Blanking duration on high latch detection",
          "symbol": "tLatch(OVP)",
          "kind": "timing",
          "unit": "µs",
          "min": 35,
          "typ": 50,
          "max": 70,
          "conditions": "",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Temperature shutdown",
          "symbol": "TTSD",
          "kind": "thermal",
          "unit": "°C",
          "min": null,
          "typ": 150,
          "max": null,
          "conditions": "TJ going up",
          "source_page": 8,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ncp12400bbeba0dr2g"
  ],
  "discovery_pitch": "NCP12400BBEBA0DR2G (onsemi) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp12400bbeba0dr2g.kicad_sym",
    "ncp12400bbeba0dr2g.kicad_mod",
    "ncp12400bbeba0dr2g.glb",
    "ncp12400bbeba0dr2g.step",
    "ncp12400bbeba0dr2g.lbr",
    "docs/hero.png",
    "docs/ncp12400bbeba0dr2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp12400bbeba0dr2g-hero.glb",
    "ncp12400bbeba0dr2g-hero.overlay.json",
    "ncp12400bbeba0dr2g-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}