main
Ray ncp1234bd65r2g: laser-etched CAD + chip hero (factory 2.0.0 backfill) 0db5fac

NCP1234BD65R2G

onsemi · AC-DC Controllers and Regulators · SOIC-7

NCP1234BD65R2G from onsemi, in a SOIC-7. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LATCH input Latch-off input. Pull the pin up or down to latch-off the controller. An internal current source allows direct connection of an NTC thermistor for over-temperature protection (OTP). Absolute maximum -0.3 to 10 V.
2 FB input Feedback input. An optocoupler collector to ground controls the output regulation. Internally biased through a 20 kΩ pull-up to VFB(ref); divided by 5 into the current-mode PWM comparator.
3 CS input Current sense input. Senses the primary current for current-mode operation and provides overpower compensation adjustment. Compared against the internal current-limit threshold V_ILIM and the stop threshold V_CS(stop).
4 GND power_in IC ground / return for all internal circuitry and the gate driver source current.
5 DRV output Gate drive output for the external power MOSFET. ±500 mA peak source/sink capability, clamped to ~13.5 V (typ) for gate protection. Absolute max -0.3 to 20 V, ±1000 mA.
6 VCC power_in Controller supply input. Accepts up to 28 Vdc with internal overvoltage detection (V_CC(ovp) ≈ 26.5 V typ). Start-up threshold V_CC(on) ≈ 12 V, turn-off V_CC(off) ≈ 9.5 V. Bypass with a local capacitor charged by the internal HV DSS current source.
8 HV power_in High-voltage start-up / Dynamic Self-Supply pin. Connects to the bulk capacitor or the rectified AC line to perform Start-up Current Source and Dynamic Self-Supply of VCC. Absolute max 500 V. Pin 7 is intentionally omitted to provide creepage between HV and VCC.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-7
Category PMIC
Pins 7

Ordering variants

Same part, different packaging or reel option.

  • NCP1234BD65R2GAD65R2G
  • NCP1234BD65R2G
  • NCP1234BD65R2GAD100R2G
  • NCP1234BD65R2GBD100R2G

CAD (KiCad official)

  • Symbol: NCP1234BD65R2G
  • Footprint: Package_SO:SOIC-8-N7_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-7 (KiCad packages3D, STEP)
  • 3D model files: ncp1234bd65r2g-etched.step / ncp1234bd65r2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp1234bd65r2g.step / ncp1234bd65r2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (35 pp, sha256 747cd99308191042, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF