component
NCP1207APG
Public Made by Adomby adom
onsemi AC-DC Controllers And Regulators, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCP1207APG
onsemi · AC-DC Controllers And Regulators · PDIP-8
NCP1207APG from onsemi, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Demag | input | Core reset detection and overvoltage detection input; the auxiliary flyback signal ensures discontinuous operation and offers a fixed overvoltage detection level of 7.2 V. |
| 2 | FB | input | Sets the peak current setpoint; an optocoupler connected to this pin adjusts the setpoint to the output power demand, and bringing the pin below the internal skip level shuts the device off. |
| 3 | CS | input | Current sense input that routes the primary current to the internal comparator via an L.E.B.; a resistor in series with this pin sets the level at which skip operation takes place. |
| 4 | GND | power_in | The IC ground. |
| 5 | Drv | output | Driver output that drives pulses to an external MOSFET. |
| 6 | VCC | power_in | Supplies the IC; connected to an external bulk capacitor of typically 10 µF. |
| 7 | NC | unconnected | Unconnected pin that ensures adequate creepage distance (there is no pin 7 on the NCP1207B). |
| 8 | HV | input | High-voltage pin connected to the high-voltage rail that injects a constant current into the VCC bulk capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | PDIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC increasing level at which the current source turns off | VCCOFF | 10.8 | 12 | 12.9 | V | 5 | |
| VCC decreasing level at which the current source turns on | VCCON | 9.1 | 10 | 10.6 | V | 5 | |
| Internal IC consumption, no output load on pin 5 | ICC1 | 1 | 1.3 | mA | FSW = 60 kHz (max at TJ = 0°C, Note 2) | 5 | |
| Internal IC consumption, 1.0 nF output load on pin 5 | ICC2 | 1.6 | 2 | mA | 1.0 nF output load on pin 5, FSW = 60 kHz (max at TJ = 0°C, Note 2) | 5 | |
| High-voltage current source | IC1 | 4.3 | 7 | 9.6 | mA | VCC = 10 V | 5 |
| Source resistance | ROH | 12 | 20 | 36 | Ω | 5 | |
| Sink resistance | ROL | 5 | 10 | 19 | Ω | 5 | |
| Maximum internal current setpoint | ILimit | 0.92 | 1 | 1.12 | V | Pin 5 unloaded | 5 |
| Propagation delay from current detection to gate OFF state | TDEL | 100 | 160 | ns | Pin 5 unloaded | 5 | |
| Overvoltage internal reference level | Vref | 6.4 | 7.2 | 8 | V | VCC = 11 V | 5 |
| Input threshold voltage (Vpin 1 decreasing) | Vth | 35 | 50 | 90 | mV | Vpin 1 decreasing | 5 |
| Input clamp voltage, high state | VCH | 8 | 10 | 12 | V | Ipin 1 = 3.0 mA | 5 |
| Input clamp voltage, low state | VCL | -0.9 | -0.7 | -0.5 | V | Ipin 1 = −2.0 mA | 5 |
| Maximum voltage on pin 8 (HV), pin 6 (VCC) decoupled to ground with 10 F | VHVMAX | 500 | V | decoupled to ground with 10 F | 4 | ||
| Minimum voltage on pin 8 (HV), pin 6 (VCC) decoupled to ground with 10 F | VHVMIN | 40 | V | decoupled to ground with 10 F | 4 | ||
| Power supply voltage, VCC pin, continuous voltage | VCC | 20 | V | Static | 4 | ||
| Transient power supply voltage | VCC Pulse | 25 | V | Duration < 10 ms, IVCC < 20 mA | 4 | ||
| Maximum voltage on pin 5 (Drv) | 20 | V | 4 | ||||
| Maximum voltage on all other pins except pin 8 (HV), pin 6 (VCC) and pin 5 (Drv) | -0.3 | 10 | V | 4 | |||
| Maximum current for all pins except VCC (6), HV (8) and Demag (1) when 10 V ESD diodes are activated | 5 | mA | 10 V ESD diodes activated | 4 | |||
| Maximum current in pin 1 (Demag) | -2 | 3 | mA | 4 | |||
| Thermal resistance, junction-to-case | RθJC | 57 | °C/W | 4 | |||
| Thermal resistance, junction-to-air, DIP8 version | RθJA | 100 | °C/W | DIP8 version | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Maximum junction temperature | TJMAX | 150 | °C | 4 | |||
| Storage temperature range | -60 | 150 | °C | 4 | |||
| ESD capability, HBM model (all pins except HV) | 2 | kV | Human Body Model, JESD22-A114E | 4 | |||
| ESD capability, machine model | 200 | V | Machine Model, JESD22-A115A | 4 |
CAD (KiCad official)
- Symbol:
NCP1207APG - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
ncp1207apg-etched.step/ncp1207apg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp1207apg.step/ncp1207apg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (21 pp, sha256
ca0eefd59508b47d, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).