NCP1203P60G

{
  "slug": "ncp1203p60g",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi AC-DC Controllers And Regulators, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ncp1203p60g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp1203p60g.kicad_sym",
    "ncp1203p60g.kicad_mod",
    "ncp1203p60g.glb",
    "ncp1203p60g.step",
    "ncp1203p60g.lbr",
    "docs/hero.png",
    "docs/ncp1203p60g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp1203p60g-hero.glb",
    "ncp1203p60g-hero.overlay.json",
    "ncp1203p60g-etched.glb"
  ],
  "component": {
    "mpn": "NCP1203P60G",
    "manufacturer": "onsemi",
    "package": "PDIP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588887598848200704",
    "parts": {
      "symbol": "ncp1203p60g.kicad_sym",
      "footprint": "ncp1203p60g.kicad_mod",
      "model_3d": "ncp1203p60g-hero.glb",
      "model_3d_plain": "ncp1203p60g-etched.glb",
      "model_3d_step": "ncp1203p60g-etched.step",
      "model_3d_step_plain": "ncp1203p60g.step",
      "lbr": "ncp1203p60g.lbr"
    },
    "distributor_links": {
      "lcsc": "C56091",
      "digikey": "NCP1203P60GOS-ND",
      "mouser": "863-NCP1203P60G"
    },
    "distributor_check": {
      "checked_at": "2026-10-15T19:14:39Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "NCP1203P60GOS-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "863-NCP1203P60G",
        "status": "found",
        "lifecycle": "End of Life"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Adj",
        "type": "passive",
        "description": "Sets the level at which skip-cycle operation takes place (recommended operation between 400 mV and 1.3 V), and shorting it to ground permanently disables skip-cycle; it has an internal output impedance of 22 kΩ (typ)."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Peak current setpoint input connected to the optocoupler; skip cycle occurs when FB falls below the Pin 1 (Adj) level, with an internal pull-up resistor of 20 kΩ (typ)."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Current sense input that routes the primary current to the internal comparator via the leading edge blanking, with a maximum internal current setpoint of 0.85 V to 1.0 V (0.92 V typ)."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "The IC ground reference for all internal circuitry."
      },
      {
        "number": "5",
        "name": "Drv",
        "type": "output",
        "description": "Driver output to the external MOSFET gate, with rise and fall times of 67 ns and 28 ns (typ) at a 1.0 nF load."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Supplies the IC and is connected to an external bulk capacitor of typically 22 µF; the turn-on threshold is 12.2 V to 14 V, the minimum operating voltage after turn-on is 7.2 V to 8.4 V, and VCC must be kept below the 16 V maximum rating."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "Unconnected pin that ensures adequate creepage distance."
      },
      {
        "number": "8",
        "name": "HV",
        "type": "power_in",
        "description": "Connected to the high-voltage rail, it injects a constant current (6.0 mA typ at VCC = 10 V) into the VCC capacitor during startup; the maximum voltage on this pin is 500 V with VCC decoupled by 10 µF."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet does not assign an electrical class to Adj; it is a level-setting pin with a stated 22; HV is classed as power_in because it is the high-voltage startup current input from the rail; the da; The MPN NCP1203P60G is ordered in the PDIP-8 (N suffix, CASE 626) package per the ordering table on "
        ],
        "pages_sent": 15,
        "cost_usd": 0.0711,
        "at": "2026-10-15T19:14:19"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588887598848200704",
        "pages": 15,
        "sha256": "6237b5f2280b2348",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncp1203p60g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-15",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp1203p60g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1878da5e8bfcffefc37a795dbaabcbd176fd11ed99894ec51c59a396b89ddd57",
        "checked": "2026-10-15",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}