Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCP115ASN280T2G

onsemi · Linear Voltage Regulators (LDO) · TSOP-5

NCP115ASN280T2G from onsemi, in a TSOP-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input pin that needs a small capacitor to ground for stability, with an operating input voltage range of 1.7 V to 5.5 V.
2 GND power_in Power supply ground pin.
3 EN input Driving EN above 0.9 V turns on the regulator, and driving EN below 0.4 V puts the regulator into shutdown mode.
4 N/C unconnected Not connected; this pin can be tied to ground to improve thermal dissipation.
5 OUT power_out Regulated output voltage pin that needs a ceramic capacitor of at least 1 µF to ground to assure stability.

Key specifications

Parameter Value
Manufacturer onsemi
Package TSOP-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Input Voltage VIN 1.7 5.5 V 3
Output Voltage Accuracy VOUT -2 2 % −40°C ≤ TJ ≤ 85°C; VOUT > 2.0 V 3
Line Regulation RegLINE 0.01 0.1 %/V VOUT + 0.5 V ≤ VIN ≤ 5.5 V (VIN ≥ 1.7 V) 3
Load Regulation - TSOP-5 package RegLOAD 28 45 mV TSOP-5 package; IOUT = 1 mA to 300 mA 3
Dropout Voltage - TSOP-5 package VDO 270 340 mV TSOP-5 package; IOUT = 300 mA; VOUT = 2.8 V 3
Output Current Limit ICL 300 600 mA VOUT = 90% VOUT(nom) 3
Quiescent Current IQ 50 95 µA IOUT = 0 mA 3
Shutdown Current IDIS 0.01 1 µA VEN ≤ 0.4 V, VIN = 5.5 V 3
EN Pin Threshold Voltage High Threshold VEN_HI 0.9 V VEN Voltage increasing 3
EN Pin Threshold Voltage Low Threshold VEN_LO 0.4 V VEN Voltage decreasing 3
VOUT Slew Rate Normal (version A and B) VOUT_SR 190 mV/s VOUT = 3.3 V, IOUT = 10 mA 3
EN Pin Input Current IEN 0.3 1 µA VEN = 5.5 V 3
Power Supply Rejection Ratio PSRR 70 dB VIN = 3.8 V, VOUT = 3.5 V, IOUT = 10 mA, f = 1 kHz 3
Output Noise Voltage VN 70 Vrms f = 10 Hz to 100 kHz 3
Thermal Shutdown Temperature TSD 160 °C Temperature increasing from TJ = +25°C 3
Thermal Shutdown Hysteresis TSDH 20 °C Temperature falling from TSD 3
Active Output Discharge Resistance RDIS 100 Ω VEN < 0.4 V, Version A and C only 3
Input Voltage VIN -0.3 6 V 2
Output Voltage VOUT -0.3 V Maximum printed as VIN + 0.3 V or 6 V 2
Enable Input Voltage VEN -0.3 6 V 2
Maximum Junction Temperature TJ(MAX) 150 °C 2
Storage Temperature TSTG -55 150 °C 2
ESD Capability, Human Body Model ESDHBM 2000 V per EIA/JESD22-A114 2
ESD Capability, Machine Model ESDMM 200 V per EIA/JESD22-A115 2
Thermal Resistance, Junction-to-Air, TSOP-5 RJA 162 °C/W Single component mounted on 1 oz FR4 PCB with 645 mm2 Cu area 2
Operating Junction Temperature TJ -40 85 °C Electrical characteristics temperature range 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper copper area connected to the pins will also improve the 14

CAD (KiCad official)

  • Symbol: NCP115ASN280T2G
  • Footprint: Package_SO:TSOP-5_1.65x3.05mm_P0.95mm
  • 3D model: TSOP-5 (KiCad packages3D, STEP)
  • 3D model files: ncp115asn280t2g-etched.step / ncp115asn280t2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp115asn280t2g.step / ncp115asn280t2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (19 pp, sha256 74cf00416de9004f, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF