main
Ray ncp115amx300tcg: laser-etched CAD + chip hero (factory 2.0.0 backfill) fde5fe9

NCP115AMX300TCG

onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · XDFN-4-EP(1x1)

NCP115AMX300TCG from onsemi, in a XDFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output voltage pin (3.0 V nominal for this OPN). A ceramic capacitor with a minimum value of 1 µF is required from this pin to GND for stability. Rated for up to 300 mA output current with typical dropout of 215 mV @ VOUT = 3.3 V, 300 mA.
2 GND power_in Power supply ground reference for the device. Also serves as the thermal return path; the exposed pad on the XDFN4 package should be soldered to the GND copper plane for effective heat removal.
3 EN input Enable input (active high). Driving EN above 0.9 V turns on the regulator; driving EN below 0.4 V puts the regulator into shutdown (IDIS typ. 0.01 µA). Absolute max VEN = 6 V; typical EN pin input current 0.3 µA at VEN = 5.5 V.
4 IN power_in Input supply pin. Operating input voltage range 1.7 V to 5.5 V (absolute max 6 V). A small ceramic input capacitor (1 µF typical) from IN to GND is required for stability and transient performance.
EPAD EPAD power_in Exposed thermal pad on the bottom of the XDFN4 package. Must be connected directly to the GND pin and soldered to a large ground copper plane to allow effective heat removal (RθJA = 208 °C/W for XDFN4 1x1 mm).

Key specifications

Parameter Value
Manufacturer onsemi
Package XDFN-4-EP(1x1)
Category Power Management (PMIC)
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • NCP115AMX300TCG
  • NCP115AMX300TCGSN

CAD (KiCad official)

  • Symbol: NCP115AMX300TCG
  • Footprint: Package_DFN_QFN:OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mm
  • 3D model: XDFN-4-EP(1x1) (KiCad packages3D, STEP)
  • 3D model files: ncp115amx300tcg-etched.step / ncp115amx300tcg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp115amx300tcg.step / ncp115amx300tcg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (19 pp, sha256 74cf00416de9004f, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF