main
Ray
ncp115amx280tcg: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero
fb6155a
NCP115AMX280TCG
onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · XDFN-4-EP(1x1)
NCP115AMX280TCG from onsemi, in a XDFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated 2.8 V output pin (fixed by the '280' option). Requires a ceramic capacitor of at least 1 uF from this pin to GND for stability. Rated for up to 300 mA continuous, with typical dropout of 250 mV at 300 mA. |
| 2 | GND | power_in | Power supply ground and reference return. The exposed pad must be tied to this pin. |
| 3 | EN | input | Active-high enable input. V_EN > 0.9 V turns the regulator on; V_EN < 0.4 V puts it into shutdown (I_DIS ~0.01 uA typ). Absolute max -0.3 V to 6 V; typical input current 0.3 uA at V_EN = 5.5 V. Do not leave floating. |
| 4 | IN | power_in | Unregulated input supply, 1.7 V to 5.5 V operating (absolute max 6 V). A small (>=1 uF) ceramic capacitor from IN to GND is required for stability. |
| EPAD | EPAD | power_in | Exposed thermal pad on the underside of the XDFN4 package. Must be soldered directly to the GND copper plane for effective heat removal (theta_JA = 208 C/W on 645 mm^2 Cu). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | XDFN-4-EP(1x1) |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
NCP115AMX280TCGNCP115AMX280TCGSN
CAD (KiCad official)
- Symbol:
NCP115AMX280TCG - Footprint:
Package_DFN_QFN:OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mm - 3D model: XDFN-4-EP(1x1) (KiCad packages3D, STEP)
- 3D model files:
ncp115amx280tcg-etched.step/ncp115amx280tcg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp115amx280tcg.step/ncp115amx280tcg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (19 pp, sha256
50d755fd53bcfc9a, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCP115AMX280TCG
**onsemi** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · XDFN-4-EP(1x1)
NCP115AMX280TCG from onsemi, in a XDFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated 2.8 V output pin (fixed by the '280' option). Requires a ceramic capacitor of at least 1 uF from this pin to GND for stability. Rated for up to 300 mA continuous, with typical dropout of 250 mV at 300 mA. |
| 2 | GND | power_in | Power supply ground and reference return. The exposed pad must be tied to this pin. |
| 3 | EN | input | Active-high enable input. V_EN > 0.9 V turns the regulator on; V_EN < 0.4 V puts it into shutdown (I_DIS ~0.01 uA typ). Absolute max -0.3 V to 6 V; typical input current 0.3 uA at V_EN = 5.5 V. Do not leave floating. |
| 4 | IN | power_in | Unregulated input supply, 1.7 V to 5.5 V operating (absolute max 6 V). A small (>=1 uF) ceramic capacitor from IN to GND is required for stability. |
| EPAD | EPAD | power_in | Exposed thermal pad on the underside of the XDFN4 package. Must be soldered directly to the GND copper plane for effective heat removal (theta_JA = 208 C/W on 645 mm^2 Cu). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | XDFN-4-EP(1x1) |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `NCP115AMX280TCG`
- `NCP115AMX280TCGSN`
## CAD (KiCad official)
- Symbol: `NCP115AMX280TCG`
- Footprint: `Package_DFN_QFN:OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mm`
- 3D model: XDFN-4-EP(1x1) (KiCad packages3D, STEP)
- 3D model files: `ncp115amx280tcg-etched.step` / `ncp115amx280tcg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp115amx280tcg.step` / `ncp115amx280tcg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp115amx280tc-d.pdf) (19 pp, sha256 `50d755fd53bcfc9a`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncp115amx280tcg-datasheet.pdf)