component

NCP114AMX180TCG

Public Made by Adom

by adom

onsemi Linear Voltage Regulators (LDO), UDFN-4-EP(1x1). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management icsncp114amx180tcgfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 3h ago
viewers ncp114amx180tcg: viewers · Ray 3h ago
ncp114amx180tcg-etched.glb Publish 0.1.0 · Ray 3h ago
ncp114amx180tcg-etched.step ncp114amx180tcg: factory component page (tier=mfr) · Ray 3h ago
ncp114amx180tcg-hero.glb ncp114amx180tcg: hero GLB from the etched model (keeps the MPN mark) · Ray 3h ago
ncp114amx180tcg-hero.overlay.json Publish 0.1.0 · Ray 3h ago
ncp114amx180tcg.glb Publish 0.1.0 · Ray 3h ago
ncp114amx180tcg.kicad_mod Publish 0.1.0 · Ray 3h ago
ncp114amx180tcg.kicad_sym Publish 0.1.0 · Ray 3h ago
ncp114amx180tcg.lbr Publish 0.1.0 · Ray 3h ago
ncp114amx180tcg.step Publish 0.1.0 · Ray 3h ago
package.json Publish 0.1.0 · Ray 3h ago
page.json Set visibility: public · Ray 3h ago
README.md Publish 0.1.0 · Ray 3h ago

NCP114AMX180TCG

onsemi · Linear Voltage Regulators (LDO) · UDFN-4-EP(1x1)

NCP114AMX180TCG from onsemi, in a UDFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output voltage pin that needs a ceramic capacitor of minimum 1 µF from this pin to ground to assure stability.
2 GND power_in Power supply ground pin, which the exposed pad must be connected directly to.
3 EN input Enable input: driving EN above 0.9 V turns on the regulator and driving it below 0.4 V puts the regulator into shutdown mode.
4 IN power_in Input supply pin that needs a small capacitor from this pin to ground to assure stability; operating input range is 1.7 V to 5.5 V.
5 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer onsemi
Package UDFN-4-EP(1x1)
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Input Voltage VIN 1.7 5.5 V 3
Output Voltage Accuracy VOUT -40 40 mV −40°C ≤ TJ ≤ 85°C; VOUT ≤ 2.0 V 3
Line Regulation RegLINE 0.01 0.1 %/V VOUT + 0.5 V ≤ VIN ≤ 5.5 V (VIN ≥ 1.7 V) 3
Load Regulation − UDFN package RegLOAD 12 30 mV IOUT = 1 mA to 300 mA 3
Load Transient TranLOAD -50 30 mV IOUT = 1 mA to 300 mA or 300 mA to 1 mA in 1 s, COUT = 1 F 3
Output Current Limit ICL 300 600 mA VOUT = 90% VOUT(nom) 3
Ground Current IQ 50 95 µA IOUT = 0 mA 3
Shutdown Current IDIS 0.01 1 µA VEN ≤ 0.4 V, VIN = 5.5 V 3
EN Pin Threshold Voltage High Threshold VEN_HI 0.9 V VEN Voltage increasing 3
EN Pin Threshold Voltage Low Threshold VEN_LO 0.4 V VEN Voltage decreasing 3
EN Pin Input Current IEN 0.3 1 µA VEN = 5.5 V 3
Input Voltage Absolute Maximum VIN -0.3 6 V 2
Output Voltage Absolute Maximum VOUT -0.3 V max VIN + 0.3 V or 6 V 2
Enable Input Absolute Maximum VEN -0.3 6 V 2
Maximum Junction Temperature TJ(MAX) 150 °C 2
Storage Temperature TSTG -55 150 °C 2
ESD Capability, Human Body Model ESDHBM 2000 V 2
ESD Capability, Machine Model ESDMM 200 V 2
Power Supply Rejection Ratio PSRR 75 dB VIN = 3.6 V, VOUT = 3.1 V, IOUT = 150 mA, f = 1 kHz 3
Output Noise Voltage VN 70 Vrms VIN = 2.5 V, VOUT = 1.8 V, IOUT = 150 mA, f = 10 Hz to 100 kHz 3
Thermal Shutdown Temperature TSD 160 °C Temperature increasing from TJ = +25°C 3
Thermal Shutdown Hysteresis TSDH 20 °C Temperature falling from TSD 3
Active Output Discharge Resistance RDIS 100 Ω VEN < 0.4 V, Version A only 3
Thermal Resistance, Junction-to-Air, UDFN4 1x1 mm RJA 170 °C/W Single component mounted on 1 oz, FR 4 PCB with 645 mm2 Cu area 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper copper area connected to the pins will also improve the 14

CAD (KiCad official)

  • Symbol: NCP114AMX180TCG
  • Footprint: Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm
  • 3D model: UDFN-4-EP(1x1) (KiCad packages3D, STEP)
  • 3D model files: ncp114amx180tcg-etched.step / ncp114amx180tcg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp114amx180tcg.step / ncp114amx180tcg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (19 pp, sha256 841792d4d8657dc0, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF