main
Ray
Publish 0.2.0
73dfe89
NCP1117ST15T3G
onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
NCP1117ST15T3G from onsemi, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Adjust/Ground | input | Adjust/Ground |
| 2 | Output | power_out | Output KiCad's SOT-223-3_TabPin2 joins the tab to this pad (Heatsink tab is connected to Pin 2). |
| 3 | Input | power_in | Input |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-223 |
| Category | PMIC |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | Vin | 20 | V | 2 | |||
| Maximum die junction temperature range | TJ | -55 | 150 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Operating ambient temperature range | TA | 0 | 125 | °C | NCP1117 grade (no I suffix), Note 4 | 2 | |
| Output current limit | Iout | 1000 | 1500 | 2200 | mA | Vin−Vout = 5.0 V, TA = 25°C, Note 6 | 3 |
| Output voltage 1.5 V at 25°C | Vout | 1.485 | 1.5 | 1.515 | V | Vin = 3.5 V, Iout = 10 mA, TA = 25 °C | 3 |
| Output voltage 1.5 V over line, load and temperature | Vout | 1.47 | 1.53 | V | Vin = 2.9 V to 11.5 V, Iout = 0 mA to 800 mA (Note 4) | 3 | |
| Line regulation 1.5 V | Regline | 0.3 | 1 | mV | Vin = 2.9 V to 11.5 V, Iout = 0 mA | 3 | |
| Load regulation 1.5 V | Regline | 2.3 | 5.5 | mV | Iout = 0 mA to 800 mA, Vin = 2.9 V | 3 | |
| Dropout voltage at Iout = 100 mA | Vin−Vout | 0.95 | 1.1 | V | Measured at Vout − 100 mV, Iout = 100 mA | 3 | |
| Dropout voltage at Iout = 500 mA | Vin−Vout | 1.01 | 1.15 | V | Measured at Vout − 100 mV, Iout = 500 mA | 3 | |
| Dropout voltage at Iout = 800 mA | Vin−Vout | 1.07 | 1.2 | V | Measured at Vout − 100 mV, Iout = 800 mA | 3 | |
| Quiescent current 1.5 V | IQ | 3.6 | 10 | mA | Vin = 11.5 V | 4 | |
| Ripple rejection 1.5 V | RR | 66 | 72 | dB | Vin−Vout = 6.4 V, Iout = 500 mA, 10 Vpp 120 Hz Sinewave | 4 | |
| Thermal regulation | 0.01 | 0.1 | %/W | TA = 25°C, 30 ms Pulse | 4 | ||
| Maximum power dissipation, SOT-223 (junction-to-ambient thermal resistance, minimum size pad) | RJA | 160 | °C/W | SOT-223 (Case 318H), minimum size pad | 2 | ||
| Thermal resistance junction-to-case, SOT-223 | RJC | 15 | °C/W | SOT-223 (Case 318H) | 2 |
CAD (KiCad official)
- Symbol:
NCP1117ST15T3G - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
ncp1117st15t3g-etched.step/ncp1117st15t3g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp1117st15t3g.step/ncp1117st15t3g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (19 pp, sha256
ec598b15cd7d6ea1, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCP1117ST15T3G
**onsemi** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
NCP1117ST15T3G from onsemi, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Adjust/Ground | input | Adjust/Ground |
| 2 | Output | power_out | Output KiCad's SOT-223-3_TabPin2 joins the tab to this pad (Heatsink tab is connected to Pin 2). |
| 3 | Input | power_in | Input |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-223 |
| Category | PMIC |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | Vin | | | 20 | V | | 2 |
| Maximum die junction temperature range | TJ | -55 | | 150 | °C | | 2 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 2 |
| Operating ambient temperature range | TA | 0 | | 125 | °C | NCP1117 grade (no I suffix), Note 4 | 2 |
| Output current limit | Iout | 1000 | 1500 | 2200 | mA | Vin−Vout = 5.0 V, TA = 25°C, Note 6 | 3 |
| Output voltage 1.5 V at 25°C | Vout | 1.485 | 1.5 | 1.515 | V | Vin = 3.5 V, Iout = 10 mA, TA = 25 °C | 3 |
| Output voltage 1.5 V over line, load and temperature | Vout | 1.47 | | 1.53 | V | Vin = 2.9 V to 11.5 V, Iout = 0 mA to 800 mA (Note 4) | 3 |
| Line regulation 1.5 V | Regline | | 0.3 | 1 | mV | Vin = 2.9 V to 11.5 V, Iout = 0 mA | 3 |
| Load regulation 1.5 V | Regline | | 2.3 | 5.5 | mV | Iout = 0 mA to 800 mA, Vin = 2.9 V | 3 |
| Dropout voltage at Iout = 100 mA | Vin−Vout | | 0.95 | 1.1 | V | Measured at Vout − 100 mV, Iout = 100 mA | 3 |
| Dropout voltage at Iout = 500 mA | Vin−Vout | | 1.01 | 1.15 | V | Measured at Vout − 100 mV, Iout = 500 mA | 3 |
| Dropout voltage at Iout = 800 mA | Vin−Vout | | 1.07 | 1.2 | V | Measured at Vout − 100 mV, Iout = 800 mA | 3 |
| Quiescent current 1.5 V | IQ | | 3.6 | 10 | mA | Vin = 11.5 V | 4 |
| Ripple rejection 1.5 V | RR | 66 | 72 | | dB | Vin−Vout = 6.4 V, Iout = 500 mA, 10 Vpp 120 Hz Sinewave | 4 |
| Thermal regulation | | | 0.01 | 0.1 | %/W | TA = 25°C, 30 ms Pulse | 4 |
| Maximum power dissipation, SOT-223 (junction-to-ambient thermal resistance, minimum size pad) | RJA | | 160 | | °C/W | SOT-223 (Case 318H), minimum size pad | 2 |
| Thermal resistance junction-to-case, SOT-223 | RJC | | 15 | | °C/W | SOT-223 (Case 318H) | 2 |
## CAD (KiCad official)
- Symbol: `NCP1117ST15T3G`
- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2`
- 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files: `ncp1117st15t3g-etched.step` / `ncp1117st15t3g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp1117st15t3g.step` / `ncp1117st15t3g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](docs/ncp1117st15t3g-datasheet.pdf) (19 pp, sha256 `ec598b15cd7d6ea1`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncp1117st15t3g-datasheet.pdf)