main
Ray
ncp1117lpst50t3g: laser-etched CAD + chip hero (factory 2.0.0 backfill)
6f0c93e
NCP1117LPST50T3G
onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
NCP1117LPST50T3G from onsemi, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin. For the fixed 5.0 V version (ST50), this pin is the device ground return; the internal resistor divider is included within the device and ground current I_gnd is 550 uA typical. All voltages are referenced to this pin. |
| 2 | Vout | power_out | Regulated output of the LDO, fixed at 5.0 V nominal (4.900 V min / 5.100 V max at TJ=25 C, 6.5 V<=Vin<=12 V, Io=10 mA). A minimum 10 uF output capacitor (20 mOhm <= ESR <= 20 Ohm) must be connected from this pin to ground to ensure stability. The SOT-223 heatsink tab is internally connected to this pin. |
| 3 | Vin | power_in | Regulator input pin, up to 18 V max DC input voltage. A large storage capacitor (20 mOhm <= ESR <= 20 Ohm) is typically connected from this pin to ground to prevent input sag during load transients. Vin must always be at least 1.3 V (typ dropout) higher than Vout for proper regulation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-223 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
NCP1117LPST50T3GST15T3GNCP1117LPST50T3GST18T3GNCP1117LPST50T3GST25T3GNCP1117LPST50T3GST33T3GNCP1117LPST50T3GNCP1117LPST50T3GSTADT3GNCP1117LPST50T3GDT18RKGNCP1117LPST50T3GDT33RKGNCP1117LPST50T3GDTADJRKG
CAD (KiCad official)
- Symbol:
NCP1117LPST50T3G - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
ncp1117lpst50t3g-etched.step/ncp1117lpst50t3g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp1117lpst50t3g.step/ncp1117lpst50t3g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (None pp, sha256
a132722bb067cb20, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCP1117LPST50T3G
**onsemi** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
NCP1117LPST50T3G from onsemi, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin. For the fixed 5.0 V version (ST50), this pin is the device ground return; the internal resistor divider is included within the device and ground current I_gnd is 550 uA typical. All voltages are referenced to this pin. |
| 2 | Vout | power_out | Regulated output of the LDO, fixed at 5.0 V nominal (4.900 V min / 5.100 V max at TJ=25 C, 6.5 V<=Vin<=12 V, Io=10 mA). A minimum 10 uF output capacitor (20 mOhm <= ESR <= 20 Ohm) must be connected from this pin to ground to ensure stability. The SOT-223 heatsink tab is internally connected to this pin. |
| 3 | Vin | power_in | Regulator input pin, up to 18 V max DC input voltage. A large storage capacitor (20 mOhm <= ESR <= 20 Ohm) is typically connected from this pin to ground to prevent input sag during load transients. Vin must always be at least 1.3 V (typ dropout) higher than Vout for proper regulation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-223 |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
- `NCP1117LPST50T3GST15T3G`
- `NCP1117LPST50T3GST18T3G`
- `NCP1117LPST50T3GST25T3G`
- `NCP1117LPST50T3GST33T3G`
- `NCP1117LPST50T3G`
- `NCP1117LPST50T3GSTADT3G`
- `NCP1117LPST50T3GDT18RKG`
- `NCP1117LPST50T3GDT33RKG`
- `NCP1117LPST50T3GDTADJRKG`
## CAD (KiCad official)
- Symbol: `NCP1117LPST50T3G`
- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2`
- 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files: `ncp1117lpst50t3g-etched.step` / `ncp1117lpst50t3g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp1117lpst50t3g.step` / `ncp1117lpst50t3g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp1117lpst50t3-d.pdf) (None pp, sha256 `a132722bb067cb20`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncp1117lpst50t3g-datasheet.pdf)