main
Ray
Publish 0.1.0
9bce484
NCP1117IDT50T4G
onsemi · Linear Voltage Regulators (LDO) · DPAK
NCP1117IDT50T4G from onsemi, in a DPAK. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Adjust/Ground | power_in | Ground reference pin, labeled Adjust/Ground in the datasheet, which serves as the adjust pin on adjustable devices and as ground on fixed-output devices such as the 5.0 V version. |
| 2 | Output | power_out | Regulated output, electrically connected to the heatsink tab, which requires an output capacitor of at least 4.7 µF with ESR between 33 mΩ (typ) and 2.2 Ω for stability. |
| 3 | Input | power_in | Unregulated input supply rated up to 20 V, where the output current must not exceed 1.0 A when Vin is greater than 12 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DPAK |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage, Fixed Output Devices 5.0 V (TA = 25 C) | VOUT | 4.95 | 5 | 5.05 | V | Vin = 7.0 V, Iout = 10 mA, TA = 25 C | 3 |
| Output Voltage, Fixed Output Devices 5.0 V (over temperature) | VOUT | 4.9 | 5.1 | V | Vin = 6.5 V to 12 V, Iout = 0 mA to 800 mA, TA over operating range (Note 4) | 3 | |
| Output Current Limit | Iout | 1000 | 1500 | 2200 | mA | Vin−Vout = 5.0 V, TA = 25°C (Note 6) | 3 |
| Dropout Voltage (Iout = 100 mA) | Vin−Vout | 0.95 | 1.1 | V | Measured at Vout − 100 mV, Iout = 100 mA | 3 | |
| Dropout Voltage (Iout = 500 mA) | Vin−Vout | 1.01 | 1.15 | V | Measured at Vout − 100 mV, Iout = 500 mA | 3 | |
| Dropout Voltage (Iout = 800 mA) | Vin−Vout | 1.07 | 1.2 | V | Measured at Vout − 100 mV, Iout = 800 mA | 3 | |
| Line Regulation 5.0 V | Regline | 0.9 | 6 | mV | Vin = 6.5 V to 15 V, Iout = 0 mA | 3 | |
| Load Regulation 5.0 V | Regload | 6.7 | 15 | mV | Iout = 0 mA to 800 mA, Vin = 6.5 V | 3 | |
| Quiescent Current 5.0 V | IQ | 6 | 10 | mA | Vin = 15 V | 4 | |
| Ripple Rejection 5.0 V | RR | 57 | 61 | dB | Vin−Vout = 6.4 V, Iout = 500 mA, 10 Vpp 120 Hz Sinewave | 4 | |
| Thermal Regulation | 0.01 | 0.1 | %/W | TA = 25°C, 30 ms Pulse | 4 | ||
| Input Voltage (absolute maximum) | Vin | 20 | V | Note 1 | 2 | ||
| Maximum Die Junction Temperature Range | TJ | -55 | 150 | °C | 2 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 2 | ||
| Operating Ambient Temperature Range (NCP1117I) | TA | -40 | 125 | °C | NCP1117I grade | 2 | |
| Thermal Resistance, Junction-to-Ambient, Minimum Size Pad (DPAK) | RJA | 67 | °C/W | DPAK (Case 369A), minimum size pad | 2 | ||
| Thermal Resistance, Junction-to-Case (DPAK) | RJC | 6 | °C/W | DPAK (Case 369A) | 2 |
CAD (KiCad official)
- Symbol:
NCP1117IDT50T4G - Footprint:
Package_TO_SOT_SMD:TO-252-2 - 3D model: DPAK (KiCad packages3D, STEP)
- 3D model files:
ncp1117idt50t4g-etched.step/ncp1117idt50t4g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp1117idt50t4g.step/ncp1117idt50t4g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (19 pp, sha256
8bd6d0050aa83242, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCP1117IDT50T4G
**onsemi** · Linear Voltage Regulators (LDO) · DPAK
NCP1117IDT50T4G from onsemi, in a DPAK. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Adjust/Ground | power_in | Ground reference pin, labeled Adjust/Ground in the datasheet, which serves as the adjust pin on adjustable devices and as ground on fixed-output devices such as the 5.0 V version. |
| 2 | Output | power_out | Regulated output, electrically connected to the heatsink tab, which requires an output capacitor of at least 4.7 µF with ESR between 33 mΩ (typ) and 2.2 Ω for stability. |
| 3 | Input | power_in | Unregulated input supply rated up to 20 V, where the output current must not exceed 1.0 A when Vin is greater than 12 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DPAK |
| Category | Power Supply Chip |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage, Fixed Output Devices 5.0 V (TA = 25 C) | VOUT | 4.95 | 5 | 5.05 | V | Vin = 7.0 V, Iout = 10 mA, TA = 25 C | 3 |
| Output Voltage, Fixed Output Devices 5.0 V (over temperature) | VOUT | 4.9 | | 5.1 | V | Vin = 6.5 V to 12 V, Iout = 0 mA to 800 mA, TA over operating range (Note 4) | 3 |
| Output Current Limit | Iout | 1000 | 1500 | 2200 | mA | Vin−Vout = 5.0 V, TA = 25°C (Note 6) | 3 |
| Dropout Voltage (Iout = 100 mA) | Vin−Vout | | 0.95 | 1.1 | V | Measured at Vout − 100 mV, Iout = 100 mA | 3 |
| Dropout Voltage (Iout = 500 mA) | Vin−Vout | | 1.01 | 1.15 | V | Measured at Vout − 100 mV, Iout = 500 mA | 3 |
| Dropout Voltage (Iout = 800 mA) | Vin−Vout | | 1.07 | 1.2 | V | Measured at Vout − 100 mV, Iout = 800 mA | 3 |
| Line Regulation 5.0 V | Regline | | 0.9 | 6 | mV | Vin = 6.5 V to 15 V, Iout = 0 mA | 3 |
| Load Regulation 5.0 V | Regload | | 6.7 | 15 | mV | Iout = 0 mA to 800 mA, Vin = 6.5 V | 3 |
| Quiescent Current 5.0 V | IQ | | 6 | 10 | mA | Vin = 15 V | 4 |
| Ripple Rejection 5.0 V | RR | 57 | 61 | | dB | Vin−Vout = 6.4 V, Iout = 500 mA, 10 Vpp 120 Hz Sinewave | 4 |
| Thermal Regulation | | | 0.01 | 0.1 | %/W | TA = 25°C, 30 ms Pulse | 4 |
| Input Voltage (absolute maximum) | Vin | | | 20 | V | Note 1 | 2 |
| Maximum Die Junction Temperature Range | TJ | -55 | | 150 | °C | | 2 |
| Storage Temperature Range | Tstg | -65 | | 150 | °C | | 2 |
| Operating Ambient Temperature Range (NCP1117I) | TA | -40 | | 125 | °C | NCP1117I grade | 2 |
| Thermal Resistance, Junction-to-Ambient, Minimum Size Pad (DPAK) | RJA | | 67 | | °C/W | DPAK (Case 369A), minimum size pad | 2 |
| Thermal Resistance, Junction-to-Case (DPAK) | RJC | | 6 | | °C/W | DPAK (Case 369A) | 2 |
## CAD (KiCad official)
- Symbol: `NCP1117IDT50T4G`
- Footprint: `Package_TO_SOT_SMD:TO-252-2`
- 3D model: DPAK (KiCad packages3D, STEP)
- 3D model files: `ncp1117idt50t4g-etched.step` / `ncp1117idt50t4g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp1117idt50t4g.step` / `ncp1117idt50t4g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp1117idt50t4-d.pdf) (19 pp, sha256 `8bd6d0050aa83242`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncp1117idt50t4g-datasheet.pdf)