NCP1117DT33RKG

{
 "schema": "adom.pads/1",
 "slug": "ncp1117dt33rkg",
 "footprint": "TO-252-2",
 "generated_from": {
  "footprint": "TO-252-2@sha256:18c28e5e147d5e9b",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -5.04,
   -2.28
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TO-252-2@sha256:18c28e5e147d5e9b"
 },
 "pad_count": 3,
 "symbol_pins": [
  "1",
  "2",
  "3"
 ],
 "paste_apertures": 4,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -5.04,
    -2.28
   ],
   "rot": 0.0,
   "size": [
    2.2,
    1.2
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "GND",
   "type": "power_in",
   "description": "Ground / common return for the fixed-output regulator. On fixed voltage devices (such as the DT33 3.3 V option) this pin serves as the ground reference; on the adjustable (LT) version this same pin is the Adjust input. Ground current I_gnd is typically 3.0 mA to 5.0 mA.",
   "is_pin1": true,
   "source": {
    "geometry": "TO-252-2.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.26,
    0.0
   ],
   "rot": 0.0,
   "size": [
    6.4,
    5.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask"
   ],
   "thermal": false,
   "pin": "2",
   "name": "VOUT",
   "type": "power_out",
   "description": "Regulated 3.3 V output (typ 3.300 V, min 3.235 V, max 3.365 V over line/load). Capable of sourcing in excess of 1.0 A. A minimum ~4.7 uF (ESR 33 mOhm to 2.2 Ohm) capacitor to ground is required for loop stability.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-252-2.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -5.04,
    2.28
   ],
   "rot": 0.0,
   "size": [
    2.2,
    1.2
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "VIN",
   "type": "power_in",
   "description": "Unregulated input supply, up to 20 V absolute maximum. Must be at least V_out + V_dropout (~1.2 V max at 800 mA) above the target output. A 10 uF ceramic or tantalum input bypass capacitor is recommended and should be mounted with the shortest possible track between the input and ground terminals.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-252-2.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}