main
Ray Publish 0.1.0 b281980

NCP110AMX080TBG

onsemi · Linear Voltage Regulators (LDO) · XDFN-4-EP(1x1)

NCP110AMX080TBG from onsemi, in a XDFN-4-EP(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output voltage; the output should be bypassed with a small 1 µF ceramic capacitor placed close to the pin.
2 GND power_in Common ground connection.
3 EN input Chip enable: applying VEN < 0.2 V disables the regulator, and pulling VEN > 0.7 V enables the LDO; absolute maximum chip enable input is −0.3 V to 6 V.
4 IN power_in Input voltage supply pin; operating input voltage range is 1.1 V to 5.5 V and the absolute maximum input voltage is −0.3 V to 6 V.
5 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer onsemi
Package XDFN-4-EP(1x1)
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Input Voltage VIN 1.1 5.5 V 4
Output Voltage Accuracy (VOUT(NOM) ≤ 1.5 V, applies to 0.80 V variant) VOUT -30 30 mV VIN = VOUT(NOM) + 0.3 V (VIN ≥ 1.1 V), VOUT(NOM) ≤ 1.5 V 4
Output Current Limit ICL 225 300 mA VOUT = 90% VOUT(NOM) 4
EN Input Voltage High VENH 0.7 V 4
EN Input Voltage Low VENL 0.2 V 4
Quiescent Current IQ 20 25 µA IOUT = 0 mA 4
Shutdown Current IDIS 0.01 1 µA VEN ≤ 0.2 V, VIN = 1.1 V 4
EN Pull Down Current IEN 0.2 0.5 µA VEN = 1.1 V 4
Operating Junction Temperature Range TJ -40 125 °C 4
Input Voltage (absolute maximum) VIN -0.3 6 V 3
Output Voltage (absolute maximum) VOUT -0.3 6 V 3
Chip Enable Input (absolute maximum) VCE -0.3 6 V 3
Maximum Junction Temperature TJ 150 °C 3
Storage Temperature TSTG -55 150 °C 3
ESD Capability, Human Body Model ESDHBM 2000 V JESD22-A114 3
ESD Capability, Machine Model ESDMM 200 V JESD22-A115 3
Thermal Resistance, Junction-to-Air (XDFN4) RJA 208 °C/W JEDEC board per JESD51-7 (Note 3) 3

CAD (KiCad official)

  • Symbol: NCP110AMX080TBG
  • Footprint: Package_DFN_QFN:OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mm
  • 3D model: XDFN-4-EP(1x1) (KiCad packages3D, STEP)
  • 3D model files: ncp110amx080tbg-etched.step / ncp110amx080tbg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp110amx080tbg.step / ncp110amx080tbg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (18 pp, sha256 852726895c73c069, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF