main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ncp1076abp100g: viewers rendered from the public page · Ray
ncp1076abp100g-etched.glb Publish 0.1.0 · Ray
ncp1076abp100g-etched.step ncp1076abp100g: factory component page (tier=mfr) · Ray
ncp1076abp100g-hero.glb ncp1076abp100g: hero GLB from the etched model (keeps the MPN mark) · Ray
ncp1076abp100g-hero.overlay.json Publish 0.1.0 · Ray
ncp1076abp100g.glb Publish 0.1.0 · Ray
ncp1076abp100g.kicad_mod Publish 0.1.0 · Ray
ncp1076abp100g.kicad_sym Publish 0.1.0 · Ray
ncp1076abp100g.lbr Publish 0.1.0 · Ray
ncp1076abp100g.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 7 pins · Ray

NCP1076ABP100G

onsemi · AC-DC Controllers & Regulators · DIP-7

NCP1076ABP100G from onsemi, in a DIP-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in IC supply pin connected to an external capacitor, with VCC management that includes auto-recovery over-voltage protection.
2 BO/AC_OVP input Detects low input voltage (brown-out) and too high an input voltage (Ac line OVP); must not be left floating and should be connected directly to GND if unused.
3 GND power_in IC ground.
4 FB input Feedback signal input; an opto-coupler connected here adjusts the peak current set-point according to the output power demand.
5 DRAIN passive Internal 700 V power MOSFET drain connection.
7 GND power_in IC ground.
8 GND power_in IC ground.

Key specifications

Parameter Value
Manufacturer onsemi
Package DIP-7
Category Power Management ICs
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC increasing level at which the switcher starts operation VCC(ON) 8 8.4 8.9 V 6
VCC decreasing level at which the HV current source restarts VCC(MIN) 6.5 6.9 7.3 V 6
VCC decreasing level at which the switcher stops operation (UVLO) VCC(OFF) 6.1 6.5 6.9 V 6
Power switch on-state resistance, TJ = 25°C RDS(ON) 4.8 6.8 Ω IDRAIN = 50 mA, TJ = 25°C, NCP1076uz/77uz 6
Power switch on-state resistance, TJ = 125°C RDS(ON) 9.3 11.6 Ω IDRAIN = 50 mA, TJ = 125°C, NCP1076uz/77uz 6
Power switch & start-up breakdown voltage BVDSS 700 V IDRAIN(OFF) = 120 µA, TJ = 25°C 6
High-voltage current source Istart1 Istart1 4 9 12 mA VCC = VCC(ON), 200 mV 6
Maximum internal current set-point at beginning of switching cycle IPK(0) 690 765 840 mA FB pin open, BO/AC_OVP pin voltage ≈ 0.8 V, TJ = 25°C, NCP1076uz 6
Oscillation frequency, 100 kHz version fOSC(100) 90 100 110 kHz TJ = 25°C (Note 4) 7
Maximum duty-cycle DMAX 64 68 72 % 7
Frequency below which skip-cycle occurs fMIN 23 27 31 kHz TJ = 25°C (Note 4) 8
VCC voltage at which the switcher stops pulsing VOVP 17 18 18.8 V 8
Brown-out level, switcher starts pulsing VBO(ON) 0.76 0.8 0.84 V 8
OVP level when the switcher stops pulsing VACOVP(ON) 2.755 2.9 3.045 V 8
OVP level when the switcher starts pulsing VACOVP(OFF) 2.3 2.6 2.9 V 8
Drain pin voltage above which MOSFET operates VHV(EN) 72 91 110 V Checked after TSD, UVLO, SCP, or VCC OVP mode, BO/AC_OVP pin = 0 V 8
Fault validation further to error flag assertion tSCP 35 48 ms 8
Internal IC consumption, MOSFET switching ICC1 1.26 mA fSW = 65 kHz, NCP1076uz/77uz 6
Internal IC consumption, no switching ICC(skip) 400 µA VFB is 0 V 6
Maximum internal current set-point at 50% duty-cycle IPK 650 mA FB pin open, TJ = 25°C, NCP1076uz 6
Final switch current, fSW = 100 kHz IPKSW(100) 685 mA primary slope 200 mA/µs, fSW = 100 kHz, NCP1076uz 7
Temperature shutdown TSD 150 °C Guaranteed by design 8
Power supply voltage, VCC pin, continuous VCC -0.3 20 V 5
Voltage on all pins, except DRAIN and VCC Vinmax -0.3 10 V 5
DRAIN voltage BVDSS -0.3 700 V 5
Maximum current into VCC pin ICC 15 mA 5
Drain current peak during transformer saturation, TJ = 150°C IDS(PK) 2.2 A TJ = 150°C, NCP1076uz/77uz 5
Drain current peak during transformer saturation, TJ = 25°C IDS(PK) 3.9 A TJ = 25°C, NCP1076uz/77uz 5
Maximum junction temperature TJMAX 150 °C 5
Storage temperature range -60 150 °C 5
ESD HBM (all pins except HV pin) HBM 2 kV JEDEC JESD22-A114F 5
ESD HBM (Drain pin) HBM 1 kV JEDEC JESD22-A114F 5
ESD CDM CDM 1 kV JEDEC JESD22-C101E 5
ESD Machine Model MM 200 V JEDEC JESD22-A115-A 5
Thermal resistance junction-to-air, PDIP7 RθJ-A 77 °C/W 0.36 Sq. Inch 5
Thermal resistance junction-to-air, PDIP7 RθJ-A 68 °C/W 1.0 Sq. Inch 5

CAD (KiCad official)

  • Symbol: NCP1076ABP100G
  • Footprint: Package_DIP:DIP-8-N6_W7.62mm
  • 3D model: DIP-7, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 5.33 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ncp1076abp100g-etched.step / ncp1076abp100g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp1076abp100g.step / ncp1076abp100g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (34 pp, sha256 29f24cb516736081, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF