main
Ray Publish 0.1.2 6b4964d
{
  "slug": "ncp1015ap065g",
  "version": "0.1.2",
  "type": "component",
  "description": "onsemi AC-DC Controllers and Regulators, DIP-7. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "ncp1015ap065g"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncp1015ap065g.kicad_sym",
    "ncp1015ap065g.kicad_mod",
    "ncp1015ap065g.glb",
    "ncp1015ap065g.step",
    "ncp1015ap065g.lbr",
    "docs/hero.png",
    "docs/ncp1015ap065g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncp1015ap065g-etched.step",
    "ncp1015ap065g-hero.glb",
    "ncp1015ap065g-hero.overlay.json"
  ],
  "component": {
    "mpn": "NCP1015AP065G",
    "manufacturer": "onsemi",
    "package": "DIP-7",
    "pin_count": 7,
    "category": "AC-DC Controllers and Regulators",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncp1015ap065-d.pdf",
    "parts": {
      "symbol": "ncp1015ap065g.kicad_sym",
      "footprint": "ncp1015ap065g.kicad_mod",
      "model_3d": "ncp1015ap065g-hero.glb",
      "model_3d_plain": "ncp1015ap065g.glb",
      "model_3d_step": "ncp1015ap065g-etched.step",
      "model_3d_step_plain": "ncp1015ap065g.step",
      "lbr": "ncp1015ap065g.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Powers the internal circuitry. Connect an external decoupling capacitor of typically 10 µF; the natural ripple on VCC participates in frequency jittering. Operating window ~7.5 V (turn-on) to 8.5 V (turn-off), with an internal ~8.7 V active shunt providing opto fail-safe protection. Can be biased by an auxiliary winding to stop the DSS and reduce standby power."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection. Provided for lead spacing/creepage; leave floating."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "IC ground reference. Tie together with pin 7 and pin 8 to the system ground / source of the internal MOSFET current-sense."
      },
      {
        "number": "4",
        "name": "FB",
        "type": "input",
        "description": "Feedback signal input. Connecting an optocoupler collector to this pin (internal ~18 kΩ pull-up to ~4 V) adjusts the primary peak-current setpoint versus output-power demand. Pulling FB low reduces peak current and eventually enters skip-cycle mode at ~25% of Ipeak."
      },
      {
        "number": "5",
        "name": "DRAIN",
        "type": "power_out",
        "description": "Drain of the internal 700 V, ~11 Ω power MOSFET and input of the high-voltage start-up current source (~8 mA). Connect to the transformer primary and to the rectified high-voltage bulk rail (up to 700 V absolute max, 1 A peak drain current during transformer saturation)."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "IC ground / MOSFET source return. Tie to pin 3 and pin 8. Pin 6 is intentionally omitted from the PDIP-7 package to increase creepage distance between the high-voltage DRAIN pin and the low-voltage ground pins."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "IC ground / MOSFET source return. Tie to pin 3 and pin 7 to complete the low-side current path."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C80091",
      "digikey": "NCP1015AP065GOS-ND",
      "mouser": "863-NCP1015AP065G"
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:11:16Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": "NCP1015AP065GOS-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "863-NCP1015AP065G",
        "status": "found"
      }
    },
    "models_3d": [
      {
        "file": "ncp1015ap065g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.62,
          10.16,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.127,
        "footprint_binding": "identity",
        "sha256": "f90bd1fa5f010bc999f2dd88ca613ee145644353e91e90fc2564259080330cbf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncp1015ap065g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.62,
          10.16,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.127,
        "footprint_binding": "identity",
        "sha256": "43d643b944137515e079e248ccd5e0b74818a75a902f621ec5e9504902c2c3b4",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}