main
Ray
ncp1015ap065g: laser-etched CAD + chip hero (factory 2.0.0 backfill)
a48e7f9
NCP1015AP065G
onsemi · AC-DC Controllers and Regulators · DIP-7
NCP1015AP065G from onsemi, in a DIP-7. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Powers the internal circuitry. Connect an external decoupling capacitor of typically 10 µF; the natural ripple on VCC participates in frequency jittering. Operating window ~7.5 V (turn-on) to 8.5 V (turn-off), with an internal ~8.7 V active shunt providing opto fail-safe protection. Can be biased by an auxiliary winding to stop the DSS and reduce standby power. |
| 2 | NC | unconnected | No internal connection. Provided for lead spacing/creepage; leave floating. |
| 3 | GND | power_in | IC ground reference. Tie together with pin 7 and pin 8 to the system ground / source of the internal MOSFET current-sense. |
| 4 | FB | input | Feedback signal input. Connecting an optocoupler collector to this pin (internal ~18 kΩ pull-up to ~4 V) adjusts the primary peak-current setpoint versus output-power demand. Pulling FB low reduces peak current and eventually enters skip-cycle mode at ~25% of Ipeak. |
| 5 | DRAIN | power_out | Drain of the internal 700 V, ~11 Ω power MOSFET and input of the high-voltage start-up current source (~8 mA). Connect to the transformer primary and to the rectified high-voltage bulk rail (up to 700 V absolute max, 1 A peak drain current during transformer saturation). |
| 7 | GND | power_in | IC ground / MOSFET source return. Tie to pin 3 and pin 8. Pin 6 is intentionally omitted from the PDIP-7 package to increase creepage distance between the high-voltage DRAIN pin and the low-voltage ground pins. |
| 8 | GND | power_in | IC ground / MOSFET source return. Tie to pin 3 and pin 7 to complete the low-side current path. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DIP-7 |
| Category | PMIC |
| Pins | 7 |
Ordering variants
NCP1015AP065GNCP1015AP065GAP100GNCP1015AP065GST065T3GNCP1015AP065GST100T3G
CAD (KiCad official)
- Symbol:
NCP1015AP065G - Footprint:
Package_DIP:DIP-8-N6_W7.62mm - 3D model: DIP-7 (KiCad packages3D, STEP)
- 3D model files:
ncp1015ap065g-etched.step/ncp1015ap065g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp1015ap065g.step/ncp1015ap065g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (None pp, sha256
37815474c5bf30c2, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NCP1015AP065G
**onsemi** · AC-DC Controllers and Regulators · DIP-7
NCP1015AP065G from onsemi, in a DIP-7. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Powers the internal circuitry. Connect an external decoupling capacitor of typically 10 µF; the natural ripple on VCC participates in frequency jittering. Operating window ~7.5 V (turn-on) to 8.5 V (turn-off), with an internal ~8.7 V active shunt providing opto fail-safe protection. Can be biased by an auxiliary winding to stop the DSS and reduce standby power. |
| 2 | NC | unconnected | No internal connection. Provided for lead spacing/creepage; leave floating. |
| 3 | GND | power_in | IC ground reference. Tie together with pin 7 and pin 8 to the system ground / source of the internal MOSFET current-sense. |
| 4 | FB | input | Feedback signal input. Connecting an optocoupler collector to this pin (internal ~18 kΩ pull-up to ~4 V) adjusts the primary peak-current setpoint versus output-power demand. Pulling FB low reduces peak current and eventually enters skip-cycle mode at ~25% of Ipeak. |
| 5 | DRAIN | power_out | Drain of the internal 700 V, ~11 Ω power MOSFET and input of the high-voltage start-up current source (~8 mA). Connect to the transformer primary and to the rectified high-voltage bulk rail (up to 700 V absolute max, 1 A peak drain current during transformer saturation). |
| 7 | GND | power_in | IC ground / MOSFET source return. Tie to pin 3 and pin 8. Pin 6 is intentionally omitted from the PDIP-7 package to increase creepage distance between the high-voltage DRAIN pin and the low-voltage ground pins. |
| 8 | GND | power_in | IC ground / MOSFET source return. Tie to pin 3 and pin 7 to complete the low-side current path. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DIP-7 |
| Category | PMIC |
| Pins | 7 |
## Ordering variants
- `NCP1015AP065G`
- `NCP1015AP065GAP100G`
- `NCP1015AP065GST065T3G`
- `NCP1015AP065GST100T3G`
## CAD (KiCad official)
- Symbol: `NCP1015AP065G`
- Footprint: `Package_DIP:DIP-8-N6_W7.62mm`
- 3D model: DIP-7 (KiCad packages3D, STEP)
- 3D model files: `ncp1015ap065g-etched.step` / `ncp1015ap065g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ncp1015ap065g.step` / `ncp1015ap065g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/ncp1015ap065-d.pdf) (None pp, sha256 `37815474c5bf30c2`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ncp1015ap065g-datasheet.pdf)