main
Ray Publish 0.1.0 bcc7324

NCP1012ST65T3G

onsemi · AC-DC Controllers & Regulators · SOT-223-4

NCP1012ST65T3G from onsemi, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Powers the internal circuitry, and the supply pin rating is -0.3 to 10 V on all pins except the drain, with an active shunt clamp (8.7 V typical) that acts as opto fail-safe protection.
2 FB input Feedback signal input that sets the peak current setpoint from the optocoupler output, and pulling it down disables the controller.
3 Drain passive Internal drain connection of the 700 V MOSFET, rated -0.3 to 700 V.
4 GND power_in IC ground reference pin.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOT-223-4
Category Power Management ICs
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage on all pins except Pin 5 (Drain) VCC -0.3 10 V On all pins except Pin 5 (Drain) 4
Drain Voltage -0.3 700 V 4
Drain Current Peak during Transformer Saturation NCP1012/13/14 IDS(pk) 1 A NCP1012/13/14 4
Maximum Current into Pin 1 when Activating the 8.7 V Active Clamp I_VCC 15 mA Pin 1 (VCC) 4
Maximum Junction Temperature TJmax 150 °C 4
Storage Temperature Range -60 150 °C 4
ESD Capability, Human Body Model 2 kV All pins except HV 4
ESD Capability, Machine Model 200 V 4
Thermal Resistance Junction-to-Lead, ST Suffix Plastic Package Case 318E (SOT-223) RJL 14 °C/W Junction-to-Lead 4
Thermal Resistance Junction-to-Air, ST Suffix SOT-223, 2.0 oz copper clad, 0.36 Sq. Inch RJA 74 °C/W Junction-to-Air, 2.0 oz (70 µm) printed circuit copper clad, 0.36 Sq. Inch (2.32 Sq. Cm) 4
Thermal Resistance Junction-to-Air, ST Suffix SOT-223, 2.0 oz copper clad, 1.0 Sq. Inch RJA 55 °C/W Junction-to-Air, 2.0 oz (70 µm) printed circuit copper clad, 1.0 Sq. Inch (6.45 Sq. Cm) 4
VCC Increasing Level at which the Current Source Turns-off VCCOFF 7.9 8.5 9.1 V Pin 1; TJ = -40°C to +125°C, VCC = 8.0 V unless otherwise noted 4
VCC Decreasing Level at which the Current Source Turns-on VCCON 6.9 7.5 8.1 V Pin 1; TJ = -40°C to +125°C, VCC = 8.0 V unless otherwise noted 4
VCC Decreasing Level at which the Latch-off Phase Ends VCClatch 4.4 4.7 5.1 V Pin 1 4
Internal IC Consumption, MOSFET Switching at 65 kHz ICC1 0.92 1.1 mA Pin 1; MOSFET switching at 65 kHz (Note 2) 4
Active Zener Voltage Positive Offset to VCCOFF Vclamp 140 200 300 mV Pin 1 4
Latch-off Current NCP1012/13/14 ILatch 6.3 7.4 9.2 mA Pin 1; NCP1012/13/14, 0°C < TJ < 125°C; FB = 1.5 V 4
Latch-off Current NCP1012/13/14 ILatch 5.8 7.4 9.2 mA Pin 1; NCP1012/13/14, −40°C < TJ < 125°C; FB = 1.5 V 4
Power Switch Circuit On-state Resistance NCP1012/13/14 (Id = 50 mA) TJ = 25°C RDSon 11 19 Ω Pin 5; NCP1012/13/14 (Id = 50 mA), TJ = 25°C 4
Power Switch Circuit On-state Resistance NCP1012/13/14 (Id = 50 mA) TJ = 125°C RDSon 22 38 Ω Pin 5; NCP1012/13/14 (Id = 50 mA), TJ = 125°C 4
Power Switch Circuit and Startup Breakdown Voltage BVdss 700 V ID(off) = 120 µA, TJ = 25°C 5
High-voltage Current Source, VCC = 8.0 V NCP1012/13/14 0°C < TJ < 125°C IC1 5 8 10 mA Pin 1; VCC = 8.0 V; NCP1012/13/14, 0°C < TJ < 125°C 5
High-voltage Current Source, VCC = 8.0 V NCP1012/13/14 −40°C < TJ < 125°C IC1 5 8 11 mA Pin 1; VCC = 8.0 V; NCP1012/13/14, −40°C < TJ < 125°C 5
Maximum Internal Current Setpoint, NCP1012 (Note 3) Ipeak (11) 225 250 275 mA TJ = 25°C (Note 3) 5
Oscillation Frequency, 65 kHz Version, TJ = 25°C (Note 4) fOSC 59 65 71 kHz 65 kHz version, TJ = 25°C (Note 4) 5
Maximum Duty-cycle Dmax 62 67 72 % 5
Temperature Shutdown TSD 140 150 160 °C 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts Copper Junction−to−Lead Junction−to−Air, 2.0 oz (70 m) Printed Circuit Copper Clad 4

CAD (KiCad official)

  • Symbol: NCP1012ST65T3G
  • Footprint: Package_TO_SOT_SMD:SOT-223
  • 3D model: SOT-223-4 (KiCad packages3D, STEP)
  • 3D model files: ncp1012st65t3g-etched.step / ncp1012st65t3g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp1012st65t3g.step / ncp1012st65t3g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (25 pp, sha256 95e3c4e712b589f1, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF