main
Ray ncl30125b2dr2g: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 5d0de8d
{
  "schema_version": 1,
  "type": "component",
  "slug": "ncl30125b2dr2g",
  "title": "NCL30125B2DR2G",
  "brief": "onsemi LED Drivers, SOIC-16. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led drivers",
    "ncl30125b2dr2g"
  ],
  "component": {
    "mpn": "NCL30125B2DR2G",
    "manufacturer": "onsemi",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589998475783147520",
    "parts": {
      "symbol": "ncl30125b2dr2g.kicad_sym",
      "footprint": "ncl30125b2dr2g.kicad_mod",
      "model_3d": "ncl30125b2dr2g-etched.glb",
      "model_3d_plain": "ncl30125b2dr2g.glb",
      "model_3d_step": "ncl30125b2dr2g-etched.step",
      "model_3d_step_plain": "ncl30125b2dr2g.step",
      "lbr": "ncl30125b2dr2g.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "HV",
        "type": "power_in",
        "description": "High-voltage startup pin (up to 700 V abs max). Connected to the rectified AC line or bulk rail through diodes/resistors to power the internal current source that charges the Vcc capacitor at startup (~11 mA typ) and supports Dynamic Self-Supply (DSS)."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Pin position is omitted from the SOIC-16 package for improved creepage between the HV pin (pin 1) and the Fault pin (pin 3)."
      },
      {
        "number": "3",
        "name": "Fault",
        "type": "input",
        "description": "Combined latching OVP/OTP fault input. Controller latches off if VFault is pulled above VFault(OVP) = 2.5 V typ or below VFault(OTP) = 0.4 V typ. Provides a 50 uA pull-up current source (100 uA boosted during startup blanking) suitable for direct interface with an NTC thermistor."
      },
      {
        "number": "4",
        "name": "BO",
        "type": "input",
        "description": "Brown-out and line-OVP sense input. Monitors a scaled version of the bulk/input voltage through a resistor divider. Controller starts pulsing when VBO > 0.80 V typ and stops after a 50 ms filter when VBO < 0.70 V typ; also provides a line-OVP shutdown above 2.9 V typ."
      },
      {
        "number": "5",
        "name": "FB",
        "type": "input",
        "description": "Feedback input from the secondary-side regulation loop, typically driven by an optocoupler collector. Internally pulled up to VFB(ref) ~4.3 V through 11.6 kOhm. VFB is divided by KFB = 4 to set the peak current setpoint; skip mode is entered below Vskip = 0.3 V."
      },
      {
        "number": "6",
        "name": "RT",
        "type": "input",
        "description": "Switching-frequency programming pin. A resistor to GND sets fSW between 50 kHz and 300 kHz (e.g. 200 kOhm -> 51 kHz, 100 kOhm -> 100 kHz, 32 kOhm -> 300 kHz). RRT = (1/fSW - 120 ns) * 1e10."
      },
      {
        "number": "7",
        "name": "SS",
        "type": "output",
        "description": "Soft-start programming pin. External capacitor to GND is charged by an internal 5.2 uA current source; SS voltage divided by 4 clamps the CS peak-current setpoint until it reaches VSS = 2.0 V typ. Internally discharged on fault (OCP, UVLO, BO)."
      },
      {
        "number": "8",
        "name": "FW",
        "type": "output",
        "description": "Auxiliary gate-drive output for the bootstrap-refresh MOSFET (M3). Used to refresh the bootstrap capacitor during startup (tboot(start) ~ 200 us) and during skip mode. Peak +100 mA / -200 mA drive; clamped at ~12.7 V; max continuous current in high state limited to 10 mA."
      },
      {
        "number": "9",
        "name": "CS",
        "type": "input",
        "description": "Primary current-sense input. Sets peak current via VILimit = 0.5 V typ, with a 2nd OCP threshold VCS(stop) = 0.75 V typ for abnormal overcurrent. Adaptive LEB (200-300 ns) and a 60 uA startup pull-up for open-pin detection. Also used to inject internal ramp compensation via internal 26.5 kOhm."
      },
      {
        "number": "10",
        "name": "Vcc",
        "type": "power_in",
        "description": "Primary controller supply. VCC(on) = 16 V typ, VCC(min) = 10 V typ, VCC(off) = 8.8 V typ, absolute maximum 35 V. An internal OVP comparator trips at Vcc(OVP) = 25.9 V typ with 20 us blanking to protect against optocoupler faults."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Controller ground return for all low-voltage circuitry and the DRV_LO/FW driver return path."
      },
      {
        "number": "12",
        "name": "DRV_LO",
        "type": "output",
        "description": "Low-side MOSFET gate driver output. Peak +0.9 A / -1.2 A source/sink; ~13.5 V active clamp (16 V max) to protect the external MOSFET gate. 13 ns typ rise/fall into 1 nF."
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Pin position is omitted from the SOIC-16 package for improved creepage between DRV_LO (pin 12) and DRV_HI (pin 14)."
      },
      {
        "number": "14",
        "name": "DRV_HI",
        "type": "output",
        "description": "High-side MOSFET gate driver output. Referenced to the HB pin and powered from Boot (floating bootstrap supply). Peak +0.9 A / -1.2 A source/sink; upper UVLO ensures adequate VGS before switching."
      },
      {
        "number": "15",
        "name": "HB",
        "type": "passive",
        "description": "Half-bridge switching-node return for the high-side driver. Connects to the source of the high-side MOSFET / drain of the low-side MOSFET; serves as reference for DRV_HI and Boot. VBoot - VHB must not exceed 20 V."
      },
      {
        "number": "16",
        "name": "Boot",
        "type": "power_in",
        "description": "Floating bootstrap supply for the high-side driver. External bootstrap capacitor tied between Boot and HB is refreshed via an external diode from Vcc and/or through the FW-driven refresh MOSFET. VBoot(on) = 8.5 V typ, VBoot(off) = 7.9 V typ, absolute max 620 V referenced to GND."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589998475783147520",
        "pages": null,
        "sha256": "7c36d2268817fc90",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncl30125b2dr2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncl30125b2dr2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          9.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3e50d1e4cf62ce91a5fd04d21330a1063e3305e59b47ba940ea110d56ebaf141",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "onsemi",
      "Package": "SOIC-16",
      "Category": "LED Drivers",
      "Pins": "16"
    }
  },
  "variants": [
    {
      "mpn": "NCL30125B2DR2GA2DR2G",
      "kind": "packaging"
    },
    {
      "mpn": "NCL30125B2DR2G",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ncl30125b2dr2g"
  ],
  "discovery_pitch": "NCL30125B2DR2G (onsemi) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncl30125b2dr2g.kicad_sym",
    "ncl30125b2dr2g.kicad_mod",
    "ncl30125b2dr2g.glb",
    "ncl30125b2dr2g.step",
    "ncl30125b2dr2g.lbr",
    "docs/hero.png",
    "docs/ncl30125b2dr2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T02:51:15.823Z"
}