main
Ray Publish 0.1.0 42605a9
{
  "slug": "ncd57090bdwr2g",
  "version": "0.1.0",
  "type": "component",
  "description": "onsemi Gate Drive ICs, SOIC-8-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "ncd57090bdwr2g",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ncd57090bdwr2g.kicad_sym",
    "ncd57090bdwr2g.kicad_mod",
    "ncd57090bdwr2g.glb",
    "ncd57090bdwr2g.step",
    "ncd57090bdwr2g.lbr",
    "docs/hero.png",
    "docs/ncd57090bdwr2g-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ncd57090bdwr2g-hero.glb",
    "ncd57090bdwr2g-hero.overlay.json",
    "ncd57090bdwr2g-etched.glb"
  ],
  "component": {
    "mpn": "NCD57090BDWR2G",
    "manufacturer": "onsemi",
    "package": "SOIC-8-300mil",
    "pin_count": 8,
    "category": "Power Supply Chip",
    "subcategory": "Gate Drive ICs",
    "datasheet": "https://www.onsemi.com/pdf/datasheet/ncd57090bdwr2-d.pdf",
    "parts": {
      "symbol": "ncd57090bdwr2g.kicad_sym",
      "footprint": "ncd57090bdwr2g.kicad_mod",
      "model_3d": "ncd57090bdwr2g-hero.glb",
      "model_3d_plain": "ncd57090bdwr2g-etched.glb",
      "model_3d_step": "ncd57090bdwr2g-etched.step",
      "model_3d_step_plain": "ncd57090bdwr2g.step",
      "lbr": "ncd57090bdwr2g.lbr"
    },
    "distributor_links": {
      "lcsc": "C2902047",
      "digikey": "488-NCD57090BDWR2GTR-ND",
      "mouser": "863-NCD57090BDWR2G"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T06:49:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "488-NCD57090BDWR2GTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "863-NCD57090BDWR2G",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VDD1",
        "type": "power_in",
        "description": "Input-side power supply that needs a good-quality bypass capacitor to GND1 placed close to the pin, and the UVLO1 circuit enables operation only when a typical supply above VUVLO1-OUT-ON (3.1 V max) is present."
      },
      {
        "number": "2",
        "name": "IN+",
        "type": "input",
        "description": "Non-inverting gate driver input, internally clamped to GND1 with an equivalent 125 kΩ pull-down, and a minimum pulse width is required before OUT responds."
      },
      {
        "number": "3",
        "name": "IN−",
        "type": "input",
        "description": "Inverting gate driver input, internally clamped to VDD1 with an equivalent 50 kΩ pull-up, and a minimum pulse width is required before OUT responds."
      },
      {
        "number": "4",
        "name": "GND1",
        "type": "power_in",
        "description": "Input-side ground reference."
      },
      {
        "number": "5",
        "name": "VDD2",
        "type": "power_in",
        "description": "Output-side positive power supply with an operating range from UVLO2 to 30 V, requiring a good-quality bypass capacitor to GND2 placed close to the pin."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "output",
        "description": "Driver output that provides the drive voltage and source/sink current to the IGBT/MOSFET gate, and is actively pulled low during start-up."
      },
      {
        "number": "7",
        "name": "GND2",
        "type": "power_in",
        "description": "Output-side gate drive reference connecting to the IGBT emitter or MOSFET source (pin 7 for the NCD57090B variant)."
      },
      {
        "number": "8",
        "name": "VEE2",
        "type": "power_in",
        "description": "Output-side negative power supply (NCD57090B) with an operating range of −15 V to 0 V relative to GND2, requiring a bypass capacitor to GND2; typical bipolar operation uses −5 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet covers the whole NCx57090y/NCx57091y family. The pin numbers for the NCD57090B variant; The datasheet's package is SOIC8 WB (CASE 751EW), which is the wide-body 300 mil SOIC-8. The orderin"
        ],
        "pages_sent": 26,
        "cost_usd": 0.096,
        "at": "2026-11-11T06:49:28"
      },
      "datasheet": {
        "url": "https://www.onsemi.com/pdf/datasheet/ncd57090bdwr2-d.pdf",
        "pages": 26,
        "sha256": "26abe74476d9160c",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ncd57090bdwr2g.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          11.5,
          5.85,
          2.8
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7835b043f302f4e38c68e80e7290f961db6856aac23a2204bcf32fbed7df4481",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ncd57090bdwr2g-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          11.5,
          5.85,
          2.8
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "134dc07550e6e2f9eb3c60a126638883e9102e81b50f3bc1e2b0ab42e393f409",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}