main
Ray nca9555pwj: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… 60c5ca3
{
  "schema_version": 1,
  "type": "component",
  "slug": "nca9555pwj",
  "title": "NCA9555PWJ",
  "brief": "Nexperia I/O Expanders, TSSOP-24. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "nca9555pwj"
  ],
  "component": {
    "mpn": "NCA9555PWJ",
    "manufacturer": "Nexperia",
    "package": "TSSOP-24",
    "pin_count": 24,
    "category": "Interface",
    "subcategory": "I/O Expanders",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8600520057474723840",
    "parts": {
      "symbol": "nca9555pwj.kicad_sym",
      "footprint": "nca9555pwj.kicad_mod",
      "model_3d": "nca9555pwj-etched.glb",
      "model_3d_plain": "nca9555pwj.glb",
      "model_3d_step": "nca9555pwj-etched.step",
      "model_3d_step_plain": "nca9555pwj.step",
      "lbr": "nca9555pwj.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "INT",
        "type": "output",
        "description": "Open-drain active LOW interrupt output. Connect to VCC through a pull-up resistor. Asserted when any GPIO configured as input changes from its corresponding Input port register state."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Hardware address input 1. Connect directly to VCC or GND to set one of the eight possible I2C slave addresses."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Hardware address input 2. Connect directly to VCC or GND to set one of the eight possible I2C slave addresses."
      },
      {
        "number": "4",
        "name": "P0_0",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 0 of port 0. Push-pull driver; can source or sink up to 25 mA. Powers up as a high-impedance input."
      },
      {
        "number": "5",
        "name": "P0_1",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 1 of port 0. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "6",
        "name": "P0_2",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 2 of port 0. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "7",
        "name": "P0_3",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 3 of port 0. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "8",
        "name": "P0_4",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 4 of port 0. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "9",
        "name": "P0_5",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 5 of port 0. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "10",
        "name": "P0_6",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 6 of port 0. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "11",
        "name": "P0_7",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 7 of port 0. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "12",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "13",
        "name": "P1_0",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 0 of port 1. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "14",
        "name": "P1_1",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 1 of port 1. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "15",
        "name": "P1_2",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 2 of port 1. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "16",
        "name": "P1_3",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 3 of port 1. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "17",
        "name": "P1_4",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 4 of port 1. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "18",
        "name": "P1_5",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 5 of port 1. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "19",
        "name": "P1_6",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 6 of port 1. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "20",
        "name": "P1_7",
        "type": "bidirectional",
        "description": "Parallel port I/O bit 7 of port 1. Push-pull driver; powers up as a high-impedance input."
      },
      {
        "number": "21",
        "name": "A0",
        "type": "input",
        "description": "Hardware address input 0. Connect directly to VCC or GND to set one of the eight possible I2C slave addresses."
      },
      {
        "number": "22",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock input. Connect to VCC through a pull-up resistor. Supports 400 kHz Fast-mode I2C."
      },
      {
        "number": "23",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data line. Open-drain; connect to VCC through a pull-up resistor."
      },
      {
        "number": "24",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage. Operating range 1.65 V to 5.5 V. Bypass with a decoupling capacitor to GND close to the pin."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8600520057474723840",
        "pages": 31,
        "sha256": "b519b13925fcf8be",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 24,
        "described": 24,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "nca9555pwj.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "706322f42d9793ebf28d5b80100a68bfa8769998a00b78acadf7af937fc1454f",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "nca9555pwj-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          7.8,
          0.97
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4e819340aa4cee8440097a4b5e75eb0c466197967b066d79b54fc325e8e8b19e",
        "checked": "2026-10-26",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Nexperia",
      "Package": "TSSOP-24",
      "Category": "Interface",
      "Pins": "24"
    }
  },
  "variants": [
    {
      "mpn": "NCA9555PWJ",
      "kind": "packaging"
    },
    {
      "mpn": "NCA9555PWJBY",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "nca9555pwj"
  ],
  "discovery_pitch": "NCA9555PWJ (Nexperia) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "nca9555pwj.kicad_sym",
    "nca9555pwj.kicad_mod",
    "nca9555pwj.glb",
    "nca9555pwj.step",
    "nca9555pwj.lbr",
    "docs/hero.png",
    "docs/nca9555pwj-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T02:50:32.797Z"
}