# NC7WZ17P6X

**onsemi** · Buffer/Driver/Transceiver · SOT-363-6

NC7WZ17P6X from onsemi, in a SOT-363-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | input | Schmitt trigger input to buffer 1. Typical hysteresis ~1 V at VCC=5 V. Input voltage tolerated up to 7 V independent of VCC (allows 5 V→3 V translation). Unused inputs must be tied HIGH or LOW; must not float. |
| 2 | GND | power_in | Device ground reference (0 V). |
| 3 | A2 | input | Schmitt trigger input to buffer 2. Same characteristics as A1: hysteresis ~1 V at 5 V, 7 V tolerant, must not be left floating. |
| 4 | Y2 | output | Non-inverting buffered output for channel 2 (Y=A). Drives ±24 mA at 3 V VCC; VOH ≈ VCC−0.1 V at 100 µA. High-impedance when VCC = 0 V (power-down). |
| 5 | VCC | power_in | Positive supply voltage. Recommended operating range 1.65 V to 5.5 V (absolute max 7 V). Quiescent supply current ICC ≤ 10 µA. |
| 6 | Y1 | output | Non-inverting buffered output for channel 1 (Y=A). Drives ±24 mA at 3 V VCC; VOH ≈ VCC−0.1 V at 100 µA. High-impedance when VCC = 0 V (power-down). |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-363-6 |
| Category | Logic |
| Pins | 6 |

## Ordering variants

Same part, different packaging or reel option.

- `NC7WZ17P6X`
- `NC7WZ17P6XL6X`
- `NC7WZ17P6XFHX`

## CAD (KiCad official)

- Symbol: `NC7WZ17P6X`
- Footprint: `Package_TO_SOT_SMD:SOT-363_SC-70-6`
- 3D model: SOT-363-6 (KiCad packages3D, STEP)
- 3D model files: `nc7wz17p6x-etched.step` / `nc7wz17p6x-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nc7wz17p6x.step` / `nc7wz17p6x.glb` are the bare package body.

## 3D model downloads

Two STEP files. Same geometry, different body top:

| File | Size | Use it when |
|---|---|---|
| [`nc7wz17p6x.step`](nc7wz17p6x.step) | 99 KB | You want the bare part, or you mark your own boards. |
| [`nc7wz17p6x-etched.step`](nc7wz17p6x-etched.step) | 1.5 MB | You want the part with `NC7WZ17P6X` already on it. |

The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 395 faces against 117 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/nc7wz17p6x-d.pdf) (11 pp, sha256 `3976c849017b78b2`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/nc7wz17p6x-datasheet.pdf)