component
NC7SV125P5X
Public Made by Adomby adom
onsemi Buffer/Driver/Transceiver, SOT-353. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
NC7SV125P5X
onsemi · Buffer/Driver/Transceiver · SOT-353
NC7SV125P5X from onsemi, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-high output disable: when OE is high, Y goes to high impedance (Z), and when OE is low, Y follows A; inputs are over-voltage tolerant up to 3.6 V. |
| 2 | A | input | Data input of the non-inverting buffer, over-voltage tolerant up to 3.6 V and supporting partial power-down protection (IOFF). |
| 3 | GND | power_in | Ground reference pin for the device. |
| 4 | Y | tri_state | Three-state buffer output that drives 24 mA source/sink at 3.3 V and goes high impedance when OE is high. |
| 5 | VCC | power_in | Positive supply pin; the device operates from VCC = 0.9 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-353 |
| Category | Logic ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive DC Supply Voltage | VCC | 0.9 | 3.6 | V | 4 | ||
| DC Input Voltage | VIN | 0 | 3.6 | V | 4 | ||
| DC Output Voltage Active-Mode (High or Low State) | VOUT | 0 | 3.6 | V | Active-Mode (High or Low State); max printed as VCC | 4 | |
| DC Output Voltage Tri-State Mode | VOUT | 0 | 3.6 | V | Tri-State Mode (Note 1) | 4 | |
| DC Output Voltage Power-Down Mode | VOUT | 0 | 3.6 | V | Power-Down Mode (VCC = 0 V) | 4 | |
| Operating Temperature Range | TA | -40 | 85 | °C | 4 | ||
| Input Transition Rise and Fall Time | tr, tf | 0 | 10 | ns/V | VCC = 3.3 V ± 0.3 V | 4 | |
| DC Supply Voltage | VCC | -0.5 | 4.3 | V | 3 | ||
| DC Input Voltage | VIN | -0.5 | 4.3 | V | 3 | ||
| DC Output Voltage Active-Mode (High or Low State) | VOUT | -0.5 | V | Active-Mode (High or Low State); upper limit VCC + 0.5 | 3 | ||
| DC Output Voltage Tri-State Mode | VOUT | -0.5 | 4.3 | V | Tri-State Mode (Note 1) | 3 | |
| DC Output Voltage Power-Down Mode | VOUT | -0.5 | 4.3 | V | Power-Down Mode (VCC = 0 V) | 3 | |
| DC Input Diode Current | IIK | -50 | mA | VIN < GND | 3 | ||
| DC Output Diode Current | IOK | -50 | mA | VOUT < GND | 3 | ||
| DC Output Source/Sink Current | IOUT | -50 | 50 | mA | 3 | ||
| DC Supply Current per Supply Pin or Ground Pin | ICC or IGND | -50 | 50 | mA | 3 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| Lead Temperature | TL | 260 | °C | 1 mm from Case for 10 Seconds | 3 | ||
| Junction Temperature Under Bias | TJ | 150 | °C | 3 | |||
| ESD Withstand Voltage Human Body Model | VESD | 2000 | V | Human Body Model (Note 3) | 3 | ||
| ESD Withstand Voltage Charged Device Model | VESD | 1000 | V | Charged Device Model (Note 3) | 3 | ||
| Latchup Performance | ILatchup | -100 | 100 | mA | Tested to EIA/JESD78 Class II (Note 4) | 3 | |
| Thermal Resistance Junction-to-Ambient SC-88A | RθJA | 377 | °C/W | SC-88A, minimum pad spacing on FR4, 2 oz copper trace, no air flow (Note 2) | 3 | ||
| Power Dissipation in Still Air SC-88A | PD | 332 | mW | SC-88A | 3 | ||
| High-Level Input Voltage | VIH | 2 | V | VCC = 2.7 to 3.6 V; TA = -40C to +85C | 4 | ||
| High-Level Input Voltage | VIH | 1.6 | V | VCC = 2.3 to <2.7 V; TA = -40C to +85C | 4 | ||
| Low-Level Input Voltage | VIL | 0.8 | V | VCC = 2.7 to 3.6 V; TA = -40C to +85C | 4 | ||
| Low-Level Input Voltage | VIL | 0.7 | V | VCC = 2.3 to <2.7 V; TA = -40C to +85C | 4 | ||
| High-Level Output Voltage | VOH | 1.25 | V | IOH = -6 mA; VCC = 1.65 to 1.95 V; TA = -40C to +85C | 4 | ||
| High-Level Output Voltage | VOH | 2 | V | IOH = -6 mA; VCC = 2.3 to <2.7 V; TA = -40C to +85C | 4 | ||
| High-Level Output Voltage | VOH | 1.8 | V | IOH = -12 mA; VCC = 2.3 to <2.7 V; TA = -40C to +85C | 4 | ||
| High-Level Output Voltage | VOH | 2.2 | V | IOH = -12 mA; VCC = 2.7 to 3.6 V; TA = -40C to +85C | 4 | ||
| High-Level Output Voltage | VOH | 1.7 | V | IOH = -18 mA; VCC = 2.3 to <2.7 V; TA = -40C to +85C | 4 | ||
| High-Level Output Voltage | VOH | 2.4 | V | IOH = -18 mA; VCC = 2.7 to 3.6 V; TA = -40C to +85C | 4 | ||
| Low-Level Output Voltage | VOL | 0.1 | V | IOL = 100 µA; VCC = 1.1 to 1.3 V; TA = -40C to +85C | 5 | ||
| Low-Level Output Voltage | VOL | 0.2 | V | IOL = 100 µA; VCC = 1.65 to 1.95 V; TA = -40C to +85C | 5 | ||
| Low-Level Output Voltage | VOL | 0.3 | V | IOL = 6 mA; VCC = 1.65 to 1.95 V; TA = -40C to +85C | 5 | ||
| Low-Level Output Voltage | VOL | 0.4 | V | IOL = 12 mA; VCC = 2.3 to <2.7 V; TA = -40C to +85C | 5 | ||
| Low-Level Output Voltage | VOL | 0.6 | V | IOL = 18 mA; VCC = 2.3 to <2.7 V; TA = -40C to +85C | 5 | ||
| Low-Level Output Voltage | VOL | 0.55 | V | IOL = 24 mA; VCC = 2.7 to 3.6 V; TA = -40C to +85C | 5 | ||
| Input Leakage Current | IIN | -0.5 | 0.5 | µA | VIN = 0 V to 3.6 V; VCC = 0.9 to 3.6 V; TA = -40C to +85C | 5 | |
| 3-State Output Leakage Current | IOZ | -0.5 | 0.5 | µA | VIN = VIH or VIL; VOUT = 0 V to 3.6 V; VCC = 0.9 to 3.6 V; TA = -40C to +85C | 5 | |
| Power Off Leakage Current | IOFF | 0.5 | µA | VIN = 0 V to 3.6 V or VOUT = 0 V to 3.6 V; VCC = 0 V; TA = -40C to +85C | 5 | ||
| Quiescent Supply Current | ICC | 0.9 | µA | VIN = VCC or GND; VCC = 0.9 to 3.6 V; TA = -40C to +85C | 5 | ||
| Propagation Delay A to Y | tPLH, tPHL | 2.8 | ns | RL = 500 Ω, CL = 30 pF; VCC = 2.7 to 3.6 V; TA = -40C to +85C (Figures 3 and 4) | 5 | ||
| Propagation Delay A to Y | tPLH, tPHL | 3 | ns | RL = 500 Ω, CL = 30 pF; VCC = 2.3 to 2.7 V; TA = -40C to +85C (Figures 3 and 4) | 5 | ||
| Output Enable Time OE to Y | tPZH, tPZL | 2.9 | ns | R1 = RL = 1 kΩ, CL = 30 pF; VCC = 2.7 to 3.6 V; TA = -40C to +85C (Figures 3 and 4) | 5 | ||
| Output Enable Time OE to Y | tPZH, tPZL | 16.4 | ns | R1 = RL = 1 kΩ, CL = 30 pF; VCC = 1.1 to 1.3 V; TA = -40C to +85C (Figures 3 and 4) | 5 | ||
| Output Disable Time OE to Y | tPHZ, tPLZ | 4.2 | ns | R1 = RL = 1 kΩ, CL = 30 pF; VCC = 2.7 to 3.6 V; TA = -40C to +85C (Figures 3 and 4) | 6 | ||
| Output Disable Time OE to Y | tPHZ, tPLZ | 14 | ns | R1 = RL = 1 kΩ, CL = 30 pF; VCC = 1.1 to 1.3 V; TA = -40C to +85C (Figures 3 and 4) | 6 |
CAD (KiCad official)
- Symbol:
NC7SV125P5X - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files:
nc7sv125p5x-etched.step/nc7sv125p5x-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nc7sv125p5x.step/nc7sv125p5x.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (10 pp, sha256
f4eeff9ca2976fba, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NC7SV125P5X
**onsemi** · Buffer/Driver/Transceiver · SOT-353
NC7SV125P5X from onsemi, in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Active-high output disable: when OE is high, Y goes to high impedance (Z), and when OE is low, Y follows A; inputs are over-voltage tolerant up to 3.6 V. |
| 2 | A | input | Data input of the non-inverting buffer, over-voltage tolerant up to 3.6 V and supporting partial power-down protection (IOFF). |
| 3 | GND | power_in | Ground reference pin for the device. |
| 4 | Y | tri_state | Three-state buffer output that drives 24 mA source/sink at 3.3 V and goes high impedance when OE is high. |
| 5 | VCC | power_in | Positive supply pin; the device operates from VCC = 0.9 V to 3.6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-353 |
| Category | Logic ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive DC Supply Voltage | VCC | 0.9 | | 3.6 | V | | 4 |
| DC Input Voltage | VIN | 0 | | 3.6 | V | | 4 |
| DC Output Voltage Active-Mode (High or Low State) | VOUT | 0 | | 3.6 | V | Active-Mode (High or Low State); max printed as VCC | 4 |
| DC Output Voltage Tri-State Mode | VOUT | 0 | | 3.6 | V | Tri-State Mode (Note 1) | 4 |
| DC Output Voltage Power-Down Mode | VOUT | 0 | | 3.6 | V | Power-Down Mode (VCC = 0 V) | 4 |
| Operating Temperature Range | TA | -40 | | 85 | °C | | 4 |
| Input Transition Rise and Fall Time | tr, tf | 0 | | 10 | ns/V | VCC = 3.3 V ± 0.3 V | 4 |
| DC Supply Voltage | VCC | -0.5 | | 4.3 | V | | 3 |
| DC Input Voltage | VIN | -0.5 | | 4.3 | V | | 3 |
| DC Output Voltage Active-Mode (High or Low State) | VOUT | -0.5 | | | V | Active-Mode (High or Low State); upper limit VCC + 0.5 | 3 |
| DC Output Voltage Tri-State Mode | VOUT | -0.5 | | 4.3 | V | Tri-State Mode (Note 1) | 3 |
| DC Output Voltage Power-Down Mode | VOUT | -0.5 | | 4.3 | V | Power-Down Mode (VCC = 0 V) | 3 |
| DC Input Diode Current | IIK | -50 | | | mA | VIN < GND | 3 |
| DC Output Diode Current | IOK | -50 | | | mA | VOUT < GND | 3 |
| DC Output Source/Sink Current | IOUT | -50 | | 50 | mA | | 3 |
| DC Supply Current per Supply Pin or Ground Pin | ICC or IGND | -50 | | 50 | mA | | 3 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 3 |
| Lead Temperature | TL | | | 260 | °C | 1 mm from Case for 10 Seconds | 3 |
| Junction Temperature Under Bias | TJ | | | 150 | °C | | 3 |
| ESD Withstand Voltage Human Body Model | VESD | | | 2000 | V | Human Body Model (Note 3) | 3 |
| ESD Withstand Voltage Charged Device Model | VESD | | | 1000 | V | Charged Device Model (Note 3) | 3 |
| Latchup Performance | ILatchup | -100 | | 100 | mA | Tested to EIA/JESD78 Class II (Note 4) | 3 |
| Thermal Resistance Junction-to-Ambient SC-88A | RθJA | | 377 | | °C/W | SC-88A, minimum pad spacing on FR4, 2 oz copper trace, no air flow (Note 2) | 3 |
| Power Dissipation in Still Air SC-88A | PD | | 332 | | mW | SC-88A | 3 |
| High-Level Input Voltage | VIH | 2 | | | V | VCC = 2.7 to 3.6 V; TA = -40C to +85C | 4 |
| High-Level Input Voltage | VIH | 1.6 | | | V | VCC = 2.3 to <2.7 V; TA = -40C to +85C | 4 |
| Low-Level Input Voltage | VIL | | | 0.8 | V | VCC = 2.7 to 3.6 V; TA = -40C to +85C | 4 |
| Low-Level Input Voltage | VIL | | | 0.7 | V | VCC = 2.3 to <2.7 V; TA = -40C to +85C | 4 |
| High-Level Output Voltage | VOH | 1.25 | | | V | IOH = -6 mA; VCC = 1.65 to 1.95 V; TA = -40C to +85C | 4 |
| High-Level Output Voltage | VOH | 2 | | | V | IOH = -6 mA; VCC = 2.3 to <2.7 V; TA = -40C to +85C | 4 |
| High-Level Output Voltage | VOH | 1.8 | | | V | IOH = -12 mA; VCC = 2.3 to <2.7 V; TA = -40C to +85C | 4 |
| High-Level Output Voltage | VOH | 2.2 | | | V | IOH = -12 mA; VCC = 2.7 to 3.6 V; TA = -40C to +85C | 4 |
| High-Level Output Voltage | VOH | 1.7 | | | V | IOH = -18 mA; VCC = 2.3 to <2.7 V; TA = -40C to +85C | 4 |
| High-Level Output Voltage | VOH | 2.4 | | | V | IOH = -18 mA; VCC = 2.7 to 3.6 V; TA = -40C to +85C | 4 |
| Low-Level Output Voltage | VOL | | | 0.1 | V | IOL = 100 µA; VCC = 1.1 to 1.3 V; TA = -40C to +85C | 5 |
| Low-Level Output Voltage | VOL | | | 0.2 | V | IOL = 100 µA; VCC = 1.65 to 1.95 V; TA = -40C to +85C | 5 |
| Low-Level Output Voltage | VOL | | | 0.3 | V | IOL = 6 mA; VCC = 1.65 to 1.95 V; TA = -40C to +85C | 5 |
| Low-Level Output Voltage | VOL | | | 0.4 | V | IOL = 12 mA; VCC = 2.3 to <2.7 V; TA = -40C to +85C | 5 |
| Low-Level Output Voltage | VOL | | | 0.6 | V | IOL = 18 mA; VCC = 2.3 to <2.7 V; TA = -40C to +85C | 5 |
| Low-Level Output Voltage | VOL | | | 0.55 | V | IOL = 24 mA; VCC = 2.7 to 3.6 V; TA = -40C to +85C | 5 |
| Input Leakage Current | IIN | -0.5 | | 0.5 | µA | VIN = 0 V to 3.6 V; VCC = 0.9 to 3.6 V; TA = -40C to +85C | 5 |
| 3-State Output Leakage Current | IOZ | -0.5 | | 0.5 | µA | VIN = VIH or VIL; VOUT = 0 V to 3.6 V; VCC = 0.9 to 3.6 V; TA = -40C to +85C | 5 |
| Power Off Leakage Current | IOFF | | | 0.5 | µA | VIN = 0 V to 3.6 V or VOUT = 0 V to 3.6 V; VCC = 0 V; TA = -40C to +85C | 5 |
| Quiescent Supply Current | ICC | | | 0.9 | µA | VIN = VCC or GND; VCC = 0.9 to 3.6 V; TA = -40C to +85C | 5 |
| Propagation Delay A to Y | tPLH, tPHL | | | 2.8 | ns | RL = 500 Ω, CL = 30 pF; VCC = 2.7 to 3.6 V; TA = -40C to +85C (Figures 3 and 4) | 5 |
| Propagation Delay A to Y | tPLH, tPHL | | | 3 | ns | RL = 500 Ω, CL = 30 pF; VCC = 2.3 to 2.7 V; TA = -40C to +85C (Figures 3 and 4) | 5 |
| Output Enable Time OE to Y | tPZH, tPZL | | | 2.9 | ns | R1 = RL = 1 kΩ, CL = 30 pF; VCC = 2.7 to 3.6 V; TA = -40C to +85C (Figures 3 and 4) | 5 |
| Output Enable Time OE to Y | tPZH, tPZL | | | 16.4 | ns | R1 = RL = 1 kΩ, CL = 30 pF; VCC = 1.1 to 1.3 V; TA = -40C to +85C (Figures 3 and 4) | 5 |
| Output Disable Time OE to Y | tPHZ, tPLZ | | | 4.2 | ns | R1 = RL = 1 kΩ, CL = 30 pF; VCC = 2.7 to 3.6 V; TA = -40C to +85C (Figures 3 and 4) | 6 |
| Output Disable Time OE to Y | tPHZ, tPLZ | | | 14 | ns | R1 = RL = 1 kΩ, CL = 30 pF; VCC = 1.1 to 1.3 V; TA = -40C to +85C (Figures 3 and 4) | 6 |
## CAD (KiCad official)
- Symbol: `NC7SV125P5X`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files: `nc7sv125p5x-etched.step` / `nc7sv125p5x-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nc7sv125p5x.step` / `nc7sv125p5x.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/nc7sv125p5x-d.pdf) (10 pp, sha256 `f4eeff9ca2976fba`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nc7sv125p5x-datasheet.pdf)