Generated by kicad-footprint-generator · KiCad file format 20260206
NB7V33MMNG
onsemi · Counters / Dividers · QFN-16(3x3)
NB7V33MMNG from onsemi, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VTCLK | passive | Internal 50 Ω termination pin for CLK; connect to a common termination voltage or leave open, noting the self-oscillation risk when no signal is applied. |
| 2 | CLK | input | Non-inverted differential CLK input accepting LVPECL, CML and LVDS levels, with internal 50 Ω termination. |
| 3 | CLK | input | Inverted differential CLK input accepting LVPECL, CML and LVDS levels, with internal 50 Ω termination. |
| 4 | VTCLK | passive | Internal 50 Ω termination pin for CLK; connect to a common termination voltage or leave open, noting the self-oscillation risk when no signal is applied. |
| 5 | VREFAC | output | Internally generated reference voltage output for capacitor-coupled inputs only; rated at 1.5 mA sink/source current. |
| 6 | GND | power_in | Negative supply voltage; all VCC and GND pins must be externally connected to the supply for proper operation. |
| 7 | GND | power_in | Negative supply voltage; all VCC and GND pins must be externally connected to the supply for proper operation. |
| 8 | GND | power_in | Negative supply voltage; all VCC and GND pins must be externally connected to the supply for proper operation. |
| 9 | VCC | power_in | Positive supply voltage, operating range 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 10 | Q | output | Inverted differential CML output, 16 mA with internal 50 Ω source termination, requiring 50 Ω to VCC at the receiver. |
| 11 | Q | output | Non-inverted differential CML output, 16 mA with internal 50 Ω source termination, requiring 50 Ω to VCC at the receiver. |
| 12 | VCC | power_in | Positive supply voltage, operating range 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 13 | VCC | power_in | Positive supply voltage, operating range 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 14 | VCC | power_in | Positive supply voltage, operating range 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 15 | R | input | Asynchronous LVCMOS reset input, asserted on the rising edge, with internal 75 kΩ pulldown to GND. |
| 16 | VCC | power_in | Positive supply voltage, operating range 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | QFN-16(3x3) |
| Category | Logic ICs |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Current VCC=2.5V±5% | ICC | 95 | 115 | mA | Inputs and Outputs Open, VCC = 2.5 V ± 5% | 4 | |
| Power Supply Current VCC=1.8V±5% | ICC | 85 | 100 | mA | Inputs and Outputs Open, VCC = 1.8 V ± 5% | 4 | |
| Output HIGH Voltage VCC=2.5V | VOH | 2470 | 2490 | 2500 | mV | VCC = 2.5 V, 50 ohm to VCC | 4 |
| Output HIGH Voltage VCC=1.8V | VOH | 1770 | 1790 | 1800 | mV | VCC = 1.8 V, 50 ohm to VCC | 4 |
| Output LOW Voltage VCC=2.5V | VOL | 1850 | 1950 | 2050 | mV | VCC = 2.5 V, 50 ohm to VCC | 4 |
| Output LOW Voltage VCC=1.8V | VOL | 1200 | 1300 | 1400 | mV | VCC = 1.8 V, 50 ohm to VCC | 4 |
| Input Threshold Reference Voltage Range | Vth | 1050 | mV | Max is VCC − 100 mV | 4 | ||
| Differential Input HIGH Voltage | VIHD | 1100 | mV | Max is VCC | 4 | ||
| Differential Input Voltage | VID | 100 | 1200 | mV | VIHD − VILD | 4 | |
| Single-ended Input Voltage | VISE | 200 | 1200 | mV | VIH − VIL | 4 | |
| Input Common Mode Range | VCMR | 1050 | mV | Differential configuration; max is VCC − 50 mV | 4 | ||
| Input HIGH Current (CLK) | IIH | -150 | 150 | µA | VTx/VTx Open | 4 | |
| Input LOW Current (CLK) | IIL | -150 | 150 | µA | VTx/VTx Open | 4 | |
| Reset Input HIGH Current | IIH | -150 | 150 | µA | Control input (Reset) | 4 | |
| Reset Input LOW Current | IIL | -150 | 150 | µA | Control input (Reset) | 4 | |
| Internal Input Termination Resistor | RTIN | 45 | 50 | 55 | Ω | 4 | |
| Internal Output Termination Resistor | RTOUT | 45 | 50 | 55 | Ω | 4 | |
| Maximum Input Clock Frequency | fMAX | 10 | 11 | GHz | 5 | ||
| Output Voltage Amplitude | VOUTPP | 260 | 400 | mV | @ VINPPmin, fin ≤ 10 GHz | 5 | |
| Propagation Delay CLK to Q | tPLH, tPHL | 150 | 200 | 350 | ps | @ 1 GHz, differential crosspoint | 5 |
| Propagation Delay R to Q | tPLH, tPHL | 500 | 600 | 700 | ps | @ 1 GHz, differential crosspoint | 5 |
| Reset Recovery | tRR | 550 | 135 | ps | 5 | ||
| Minimum Pulse Width R | tPW | 500 | 200 | ps | 5 | ||
| Output Clock Duty Cycle | tDC | 45 | 50 | 55 | % | fin ≤ 10 GHz, reference duty cycle 50% | 5 |
| Output Random Jitter | tJITTER | 0.2 | 0.8 | ps RMS | fin ≤ 10.0 GHz | 5 | |
| Input Voltage Swing | VINPP | 200 | 1200 | mV | Differential configuration | 5 | |
| Output Rise/Fall Times | tr, tf | 20 | 35 | 60 | ps | @ 1 GHz (20% − 80%), Q, Q | 5 |
| Positive Power Supply | VCC | 3 | V | GND = 0 V | 3 | ||
| Differential Input Voltage | VINPP | 1.89 | V | /D − D/ | 3 | ||
| Input Current Through RT | IIN | 40 | mA | 50 Ω resistor | 3 | ||
| Output Current Through RT | IOUT | 40 | mA | 50 Ω resistor | 3 | ||
| VREFAC Sink/Source Current | IVFREFAC | 1.5 | mA | 3 | |||
| Operating Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 3 | ||
| Wave Solder Pb-Free | Tsol | 265 | °C | 3 | |||
| Thermal Resistance Junction-to-Ambient 0 lfpm | θJA | 42 | °C/W | QFN-16, 0 lfpm, 2S2P board | 3 | ||
| Thermal Resistance Junction-to-Ambient 500 lfpm | θJA | 35 | °C/W | QFN-16, 500 lfpm, 2S2P board | 3 | ||
| Thermal Resistance Junction-to-Case | θJC | 4 | °C/W | QFN-16 | 3 | ||
| Operating Supply Voltage | VCC | 1.71 | 2.625 | V | GND = 0 V | 1 |
CAD (KiCad official)
- Symbol:
NB7V33MMNG - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
nb7v33mmng-etched.step/nb7v33mmng-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nb7v33mmng.step/nb7v33mmng.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (11 pp, sha256
bfba039394ded733, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).