main
Ray
Publish 0.1.0
2640504
NB7V32MMNTXG
onsemi · Clock Generators / Frequency Synthesizers / PLL · QFN-16-EP(3x3)
NB7V32MMNTXG from onsemi, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VTCLK | passive | Internal 50 termination pin for CLK, to be connected to a common termination voltage or left open per the datasheet. |
| 2 | CLK | input | Non-inverted differential CLK input accepting LVPECL, CML and LVDS levels, with internal 50 termination. |
| 3 | CLK | input | Inverted differential CLK input accepting LVPECL, CML and LVDS levels, with internal 50 termination. |
| 4 | VTCLK | passive | Internal 50 termination pin for CLK, to be connected to a common termination voltage or left open per the datasheet. |
| 5 | VREFAC | output | Internally generated output voltage reference for capacitor-coupled inputs only. |
| 6 | GND | power_in | Negative supply voltage; must be externally connected to a power supply for proper operation. |
| 7 | GND | power_in | Negative supply voltage; must be externally connected to a power supply for proper operation. |
| 8 | GND | power_in | Negative supply voltage; must be externally connected to a power supply for proper operation. |
| 9 | VCC | power_in | Positive supply voltage, operating range VCC = 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 10 | Q | output | Inverted CML differential output with internal 50 source termination, 400 mV typical peak-to-peak swing when receiver terminated to VCC. |
| 11 | Q | output | Non-inverted CML differential output with internal 50 source termination, 400 mV typical peak-to-peak swing when receiver terminated to VCC. |
| 12 | VCC | power_in | Positive supply voltage, operating range VCC = 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 13 | VCC | power_in | Positive supply voltage, operating range VCC = 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 14 | VCC | power_in | Positive supply voltage, operating range VCC = 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 15 | R | input | Asynchronous LVCMOS reset input, asserted on the rising edge, with internal 75 k pulldown to GND. |
| 16 | VCC | power_in | Positive supply voltage, operating range VCC = 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | QFN-16-EP(3x3) |
| Category | Clock and Timing |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive Power Supply | VCC | 3 | V | GND = 0 V | 3 | ||
| Positive Input Voltage | VIN | -0.5 | V | GND = 0 V; upper limit printed as VCC + 0.5 V | 3 | ||
| Differential Input Voltage | VINPP | 1.89 | V | /D − D/ | 3 | ||
| Input Current Through RT (50 resistor) | IIN | -40 | 40 | mA | Through RT (50 resistor) | 3 | |
| Output Current Through RT (50 resistor) | IOUT | -40 | 40 | mA | Through RT (50 resistor) | 3 | |
| VREFAC Sink/Source Current | IVREFAC | -1.5 | 1.5 | mA | 3 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 3 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 42 | °C/W | 0 lfpm, QFN-16 (Note 3) | 3 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 35 | °C/W | 500 lfpm, QFN-16 (Note 3) | 3 | ||
| Thermal Resistance Junction-to-Case | θJC | 4 | °C/W | QFN-16 (Note 3) | 3 | ||
| Wave Solder | Tsol | 265 | °C | Pb-Free | 3 | ||
| Power Supply Current (Inputs and Outputs Open) | ICC | 90 | 100 | mA | VCC = 2.5 V ±5% | 4 | |
| Power Supply Current (Inputs and Outputs Open) | ICC | 80 | 90 | mA | VCC = 1.8 V ±5% | 4 | |
| Output HIGH Voltage | VOH | 2470 | 2490 | 2500 | mV | VCC = 2.5 V (Note 5) | 4 |
| Output HIGH Voltage | VOH | 1770 | 1790 | 1800 | mV | VCC = 1.8 V (Note 5) | 4 |
| Output LOW Voltage | VOL | 1900 | 2000 | 2100 | mV | VCC = 2.5 V (Note 5) | 4 |
| Output LOW Voltage | VOL | 1250 | 1350 | 1450 | mV | VCC = 1.8 V (Note 5) | 4 |
| Input Threshold Reference Voltage Range | Vth | 1050 | mV | Note 7; max printed as VCC − 100 mV | 4 | ||
| Single-Ended Input Voltage | VISE | 200 | 1200 | mV | (VIH − VIL) | 4 | |
| Differential Input HIGH Voltage | VIHD | 1100 | mV | Note 9; max printed as VCC | 4 | ||
| Differential Input Voltage | VID | 100 | 1200 | mV | (VIHD − VILD); Note 9 | 4 | |
| Input Common Mode Range | VCMR | 1050 | mV | Differential Configuration, Note 10; max printed as VCC − 50 mV | 4 | ||
| Input HIGH Current | IIH | -150 | 150 | uA | VTCLK/VTCLK Open | 4 | |
| Input LOW Current | IIL | -150 | 150 | uA | VTCLK/VTCLK Open | 4 | |
| Input LOW Voltage for Control Pin | VIL | 200 | mV | Reset pin; min printed as GND | 4 | ||
| Internal Input Termination Resistor | RTIN | 45 | 50 | 55 | @ 10 mA | 4 | |
| Internal Output Termination Resistor | RTOUT | 45 | 50 | 55 | @ 10 mA | 4 | |
| Maximum Input Clock Frequency | fMAX | 10 | GHz | 5 | |||
| Output Voltage Amplitude | VOUTPP | 280 | 400 | mV | @ VINPPmin, fin ≤ 10GHz (Note 12) | 5 | |
| Propagation Delay to Differential Outputs | tPLH, tPHL | 150 | 200 | ps | @ 1 GHz, CLK/CLK to Q, Q | 5 | |
| Propagation Delay to Differential Outputs | tPLH, tPHL | 200 | 275 | ps | @ 1 GHz, R to Q, Q | 5 | |
| Propagation Delay Temperature Coefficient | tPLH TC | 50 | fs/°C | 5 | |||
| Duty Cycle Skew | tskew | 20 | 50 | ps | Device − Device skew (tpdmax − tpdmin) (Note 13) | 5 | |
| Output Clock Duty Cycle | tDC | 45 | 50 | 55 | % | Reference Duty Cycle = 50%, fin ≤ 10 GHz | 5 |
| Output Random Jitter | tJITTER | 0.2 | 0.8 | ps RMS | fin ≤ 10 GHz (Note 14) | 5 | |
| Input Voltage Swing (Differential Configuration) | VINPP | 100 | 1200 | mV | Figure 10 (Note 15) | 5 | |
| Output Rise/Fall Times | tr, tf | 35 | 60 | ps | @ 1 GHz (20% − 80%), Q, Q | 5 |
CAD (KiCad official)
- Symbol:
NB7V32MMNTXG - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
nb7v32mmntxg-etched.step/nb7v32mmntxg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nb7v32mmntxg.step/nb7v32mmntxg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (10 pp, sha256
4bfe387919fc3dad, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NB7V32MMNTXG
**onsemi** · Clock Generators / Frequency Synthesizers / PLL · QFN-16-EP(3x3)
NB7V32MMNTXG from onsemi, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VTCLK | passive | Internal 50 termination pin for CLK, to be connected to a common termination voltage or left open per the datasheet. |
| 2 | CLK | input | Non-inverted differential CLK input accepting LVPECL, CML and LVDS levels, with internal 50 termination. |
| 3 | CLK | input | Inverted differential CLK input accepting LVPECL, CML and LVDS levels, with internal 50 termination. |
| 4 | VTCLK | passive | Internal 50 termination pin for CLK, to be connected to a common termination voltage or left open per the datasheet. |
| 5 | VREFAC | output | Internally generated output voltage reference for capacitor-coupled inputs only. |
| 6 | GND | power_in | Negative supply voltage; must be externally connected to a power supply for proper operation. |
| 7 | GND | power_in | Negative supply voltage; must be externally connected to a power supply for proper operation. |
| 8 | GND | power_in | Negative supply voltage; must be externally connected to a power supply for proper operation. |
| 9 | VCC | power_in | Positive supply voltage, operating range VCC = 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 10 | Q | output | Inverted CML differential output with internal 50 source termination, 400 mV typical peak-to-peak swing when receiver terminated to VCC. |
| 11 | Q | output | Non-inverted CML differential output with internal 50 source termination, 400 mV typical peak-to-peak swing when receiver terminated to VCC. |
| 12 | VCC | power_in | Positive supply voltage, operating range VCC = 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 13 | VCC | power_in | Positive supply voltage, operating range VCC = 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 14 | VCC | power_in | Positive supply voltage, operating range VCC = 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 15 | R | input | Asynchronous LVCMOS reset input, asserted on the rising edge, with internal 75 k pulldown to GND. |
| 16 | VCC | power_in | Positive supply voltage, operating range VCC = 1.71 V to 2.625 V with GND = 0 V; must be externally connected for proper operation. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | QFN-16-EP(3x3) |
| Category | Clock and Timing |
| Pins | 17 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Positive Power Supply | VCC | | | 3 | V | GND = 0 V | 3 |
| Positive Input Voltage | VIN | -0.5 | | | V | GND = 0 V; upper limit printed as VCC + 0.5 V | 3 |
| Differential Input Voltage | VINPP | | | 1.89 | V | /D − D/ | 3 |
| Input Current Through RT (50 resistor) | IIN | -40 | | 40 | mA | Through RT (50 resistor) | 3 |
| Output Current Through RT (50 resistor) | IOUT | -40 | | 40 | mA | Through RT (50 resistor) | 3 |
| VREFAC Sink/Source Current | IVREFAC | -1.5 | | 1.5 | mA | | 3 |
| Operating Temperature Range | TA | -40 | | 85 | °C | | 3 |
| Storage Temperature Range | Tstg | -65 | | 150 | °C | | 3 |
| Thermal Resistance Junction-to-Ambient | θJA | | | 42 | °C/W | 0 lfpm, QFN-16 (Note 3) | 3 |
| Thermal Resistance Junction-to-Ambient | θJA | | | 35 | °C/W | 500 lfpm, QFN-16 (Note 3) | 3 |
| Thermal Resistance Junction-to-Case | θJC | | | 4 | °C/W | QFN-16 (Note 3) | 3 |
| Wave Solder | Tsol | | | 265 | °C | Pb-Free | 3 |
| Power Supply Current (Inputs and Outputs Open) | ICC | | 90 | 100 | mA | VCC = 2.5 V ±5% | 4 |
| Power Supply Current (Inputs and Outputs Open) | ICC | | 80 | 90 | mA | VCC = 1.8 V ±5% | 4 |
| Output HIGH Voltage | VOH | 2470 | 2490 | 2500 | mV | VCC = 2.5 V (Note 5) | 4 |
| Output HIGH Voltage | VOH | 1770 | 1790 | 1800 | mV | VCC = 1.8 V (Note 5) | 4 |
| Output LOW Voltage | VOL | 1900 | 2000 | 2100 | mV | VCC = 2.5 V (Note 5) | 4 |
| Output LOW Voltage | VOL | 1250 | 1350 | 1450 | mV | VCC = 1.8 V (Note 5) | 4 |
| Input Threshold Reference Voltage Range | Vth | 1050 | | | mV | Note 7; max printed as VCC − 100 mV | 4 |
| Single-Ended Input Voltage | VISE | 200 | | 1200 | mV | (VIH − VIL) | 4 |
| Differential Input HIGH Voltage | VIHD | 1100 | | | mV | Note 9; max printed as VCC | 4 |
| Differential Input Voltage | VID | 100 | | 1200 | mV | (VIHD − VILD); Note 9 | 4 |
| Input Common Mode Range | VCMR | 1050 | | | mV | Differential Configuration, Note 10; max printed as VCC − 50 mV | 4 |
| Input HIGH Current | IIH | -150 | | 150 | uA | VTCLK/VTCLK Open | 4 |
| Input LOW Current | IIL | -150 | | 150 | uA | VTCLK/VTCLK Open | 4 |
| Input LOW Voltage for Control Pin | VIL | | | 200 | mV | Reset pin; min printed as GND | 4 |
| Internal Input Termination Resistor | RTIN | 45 | 50 | 55 | | @ 10 mA | 4 |
| Internal Output Termination Resistor | RTOUT | 45 | 50 | 55 | | @ 10 mA | 4 |
| Maximum Input Clock Frequency | fMAX | 10 | | | GHz | | 5 |
| Output Voltage Amplitude | VOUTPP | 280 | 400 | | mV | @ VINPPmin, fin ≤ 10GHz (Note 12) | 5 |
| Propagation Delay to Differential Outputs | tPLH, tPHL | 150 | 200 | | ps | @ 1 GHz, CLK/CLK to Q, Q | 5 |
| Propagation Delay to Differential Outputs | tPLH, tPHL | | 200 | 275 | ps | @ 1 GHz, R to Q, Q | 5 |
| Propagation Delay Temperature Coefficient | tPLH TC | | 50 | | fs/°C | | 5 |
| Duty Cycle Skew | tskew | | 20 | 50 | ps | Device − Device skew (tpdmax − tpdmin) (Note 13) | 5 |
| Output Clock Duty Cycle | tDC | 45 | 50 | 55 | % | Reference Duty Cycle = 50%, fin ≤ 10 GHz | 5 |
| Output Random Jitter | tJITTER | | 0.2 | 0.8 | ps RMS | fin ≤ 10 GHz (Note 14) | 5 |
| Input Voltage Swing (Differential Configuration) | VINPP | 100 | | 1200 | mV | Figure 10 (Note 15) | 5 |
| Output Rise/Fall Times | tr, tf | | 35 | 60 | ps | @ 1 GHz (20% − 80%), Q, Q | 5 |
## CAD (KiCad official)
- Symbol: `NB7V32MMNTXG`
- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`
- 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files: `nb7v32mmntxg-etched.step` / `nb7v32mmntxg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nb7v32mmntxg.step` / `nb7v32mmntxg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/nb7v32mmntx-d.pdf) (10 pp, sha256 `4bfe387919fc3dad`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nb7v32mmntxg-datasheet.pdf)