main
Ray
Publish 0.1.0
804f208
NB3H5150MNTXG
onsemi · Clock Generators / Frequency Synthesizers / PLL · QFN-32-EP(5x5)
NB3H5150MNTXG from onsemi, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLK_XTAL2 | input | Crystal output or complementary differential clock input; must be connected to ground when CLK_XTAL1 is used as a single-ended input. |
| 2 | REFMODE | input | Selects the reference input: LOW for a crystal, HIGH for an overdriven single-ended or differential input; has an internal pull-down. |
| 3 | SDA | input | I2C/SMBus serial data input that defaults High when left open, has an internal pull-up, and is 5 V tolerant. |
| 4 | SCL/PD | input | I2C/SMBus serial clock input that defaults High when left open, has an internal pull-up, and is 5 V tolerant; in pin-strap mode only, High powers the device down. |
| 5 | VDD | power_in | 3.3 V or 2.5 V positive supply for the inputs and core; VDD and AVDDn must all be at the same voltage. |
| 6 | FS1 | input | Three-level frequency select for DIV1, CLK1A and CLK1B; default is mid-logic level, with internal pull-up and pull-down (see Table 3). |
| 7 | FS2 | input | Three-level frequency select for DIV2, CLK2A and CLK2B; default is mid-logic level, with internal pull-up and pull-down (see Table 3). |
| 8 | FS3 | input | Three-level frequency select for DIV3, CLK3A and CLK3B; default is mid-logic level, with internal pull-up and pull-down (see Table 3). |
| 9 | FS4A | input | Three-level frequency select A for DIV4, CLK4A and CLK4B; default is mid-logic level, with internal pull-up and pull-down (see Table 4). |
| 10 | FS4B | input | Three-level frequency select B for DIV4, CLK4A and CLK4B; default is mid-logic level, with internal pull-up and pull-down (see Table 4). |
| 11 | LDO4 | power_out | Internal 1.8 V LDO output that requires a power conditioning bypass capacitor to ground (1 µF to 10 µF range for LDOs). |
| 12 | AVDD3 | power_in | 3.3 V or 2.5 V positive supply for analog circuits; equal to VDD. |
| 13 | LDO3 | power_out | Internal 1.8 V LDO output that requires a power conditioning bypass capacitor to ground (1 µF to 10 µF range for LDOs). |
| 14 | CLK4A | output | LVCMOS single-ended or non-inverted differential LVPECL clock A output for channel 4. |
| 15 | CLK4B | output | LVCMOS single-ended or inverted differential LVPECL clock B output for channel 4. |
| 16 | VDDO4 | power_in | 3.3 V, 2.5 V or 1.8 V positive supply for the CLK4A/4B outputs. |
| 17 | MMC | input | Mix mode control pin combining FSn and I2C settings for the CLK(n) outputs in I2C mode; has no logic default, so use a pull-up resistor for High or a pull-down resistor for Low. |
| 18 | CLK3B | output | LVCMOS single-ended or inverted differential LVPECL clock B output for channel 3. |
| 19 | CLK3A | output | LVCMOS single-ended or non-inverted differential LVPECL clock A output for channel 3. |
| 20 | VDDO3 | power_in | 3.3 V, 2.5 V or 1.8 V positive supply for the CLK3A/3B outputs. |
| 21 | VDDO2 | power_in | 3.3 V, 2.5 V or 1.8 V positive supply for the CLK2A/2B outputs. |
| 22 | CLK2A | output | LVCMOS single-ended or non-inverted differential LVPECL clock A output for channel 2. |
| 23 | CLK2B | output | LVCMOS single-ended or inverted differential LVPECL clock B output for channel 2. |
| 24 | FTM | input | Factory test mode pin that must be connected to ground. |
| 25 | VDDO1 | power_in | 3.3 V, 2.5 V or 1.8 V positive supply for the CLK1A/1B outputs. |
| 26 | CLK1B | output | LVCMOS single-ended or inverted differential LVPECL clock B output for channel 1. |
| 27 | CLK1A | output | LVCMOS single-ended or non-inverted differential LVPECL clock A output for channel 1. |
| 28 | AVDD2 | power_in | 3.3 V or 2.5 V positive supply for analog circuits; equal to VDD. |
| 29 | LDO2 | power_out | Internal 1.8 V LDO output that requires a power conditioning bypass capacitor to ground (1 µF to 10 µF range for LDOs). |
| 30 | AVDD1 | power_in | 3.3 V or 2.5 V positive supply for analog circuits; equal to VDD. |
| 31 | LDO1 | power_out | Internal 1.8 V LDO output that requires a power conditioning bypass capacitor to ground (1 µF to 10 µF range for LDOs). |
| 32 | CLK_XTAL1 | input | Crystal input or single-ended/differential clock input; if used single-ended, CLK_XTAL2 must be connected to ground. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | QFN-32-EP(5x5) |
| Category | RTC/Clock Chip |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Core power supply VDD/AVDDn, 3.3 V nominal | VDD/AVDDn | 3.135 | 3.3 | 3.465 | V | VDD = AVDDn = 3.3 V ±5% | 9 |
| Core power supply VDD/AVDDn, 2.5 V nominal | VDD/AVDDn | 2.375 | 2.5 | 2.625 | V | VDD = AVDDn = 2.5 V ±5% | 9 |
| Output power supply VDDOn, 3.3 V nominal | VDDOn | 3.135 | 3.3 | 3.465 | V | VDDOn = 3.3 V ±5% | 9 |
| Output power supply VDDOn, 2.5 V nominal | VDDOn | 2.375 | 2.5 | 2.625 | V | VDDOn = 2.5 V ±5% | 9 |
| Output power supply VDDOn, 1.8 V nominal | VDDOn | 1.71 | 1.8 | 1.89 | V | VDDOn = 1.8 V ±5% (LVCMOS only) | 9 |
| Core and input supply current, CLK4 integer | IDD/IADDn | 60 | 75 | mA | VDD = 3.3 V, CLK4 Integer | 9 | |
| Core and input supply current, CLK4 Frac-N | IDD/IADDn | 75 | 90 | mA | VDD = 3.3 V, CLK4 Frac-N | 9 | |
| Core and input supply current, CLK4 integer | IDD/IADDn | 55 | 70 | mA | VDD = 2.5 V, CLK4 Integer | 9 | |
| Core and input supply current, CLK4 Frac-N | IDD/IADDn | 70 | 85 | mA | VDD = 2.5 V, CLK4 Frac-N | 9 | |
| Output buffer supply current, one LVPECL bank | IDDOn | 40 | 50 | mA | LVPECL, one differential pair, VDDO = 3.3 V | 9 | |
| Output buffer supply current, one LVCMOS bank | IDDOn | 20 | 25 | mA | LVCMOS, two outputs, VDDO = 3.3 V | 9 | |
| Output buffer supply current, one LVCMOS bank | IDDOn | 17 | 23 | mA | LVCMOS, two outputs, VDDO = 2.5 V | 9 | |
| Output buffer supply current, one LVCMOS bank | IDDOn | 15 | 21 | mA | LVCMOS, two outputs, VDDO = 1.8 V | 9 | |
| LVPECL output HIGH voltage (printed as VDDO − 1.200 to VDDO − 0.895; values are the printed offsets from VDDO) | VOH | -1.2 | -0.895 | V | VDDOn = 3.3 V ±5% or 2.5 V ±5%; See Figure 10 | 9 | |
| LVPECL output LOW voltage (printed as VDDO − 2.000 to VDDO − 1.600; values are the printed offsets from VDDO) | VOL | -2 | -1.6 | V | VDDOn = 3.3 V ±5% or 2.5 V ±5%; See Figure 10 | 9 | |
| LVPECL output peak-to-peak voltage swing | VSWING | 550 | 720 | 900 | mV | VOUT PK-PK; VDDOn = 3.3 V ±5% or 2.5 V ±5% | 9 |
| LVCMOS output HIGH voltage (printed as VDDO − 0.5 to VDDO; min is offset −0.5 from VDDO, max printed without a number) | VOH | -0.5 | V | IOH = 12 mA; See Figure 12 | 10 | ||
| LVCMOS output LOW voltage (printed as GND to 0.5) | VOL | 0.5 | V | IOL = 12 mA; See Figure 12 | 10 | ||
| Vth input threshold reference voltage (printed as 100 to VDD − 100; max is offset −100 from VDD) | Vth | 100 | -100 | mV | Crystal input driven single-ended (REFMODE = 1) | 10 | |
| Differential input HIGH voltage (printed as 100 to VDD; min only) | VIHD | 100 | mV | Crystal inputs driven differentially (REFMODE = 1) | 10 | ||
| Input common mode range (printed as 50 to VDD − 50; max is offset −50 from VDD) | VCMR | 50 | -50 | mV | Differential configuration | 10 | |
| Input HIGH current, crystal pins | IIH | -10 | 10 | µA | CLK_XTAL1 and CLKb_XTAL2 | 10 | |
| Input LOW current, crystal pins | IIL | -10 | 10 | µA | CLK_XTAL1 and CLKb_XTAL2 | 10 | |
| Input HIGH voltage for MMC and REFMODE pins | VIH | 2.1 | V | VDD = 3.3 V | 10 | ||
| Input HIGH voltage for MMC and REFMODE pins | VIH | 1.75 | V | VDD = 2.5 V | 10 | ||
| Input HIGH voltage for SDA and SCL/PD pins | VIH | 2.1 | 5.5 | V | VDD = 3.3 V | 10 | |
| Input HIGH voltage for SDA and SCL/PD pins | VIH | 1.75 | 5.5 | V | VDD = 2.5 V | 10 | |
| Input LOW voltage for control pins and SDA and SCL/PD | VIL | 0.7 | V | VDD = 3.3 V | 10 | ||
| Control pin input HIGH current | IIH | -150 | 150 | µA | Control pins | 10 | |
| Control pin input LOW current | IIL | -150 | 150 | µA | Control pins | 10 | |
| Tri-level input HIGH voltage (FSn pins), printed as VDD × 75% to VDD | VIHtri | 2.48 | V | VDD = 3.3 V | 10 | ||
| Tri-level input HIGH voltage (FSn pins), printed as VDD × 75% to VDD | VIHtri | 1.88 | V | VDD = 2.5 V | 10 | ||
| Tri-level input MID voltage (FSn pins) | VIMtri | 1.32 | 1.98 | V | VDD = 3.3 V | 10 | |
| Tri-level input MID voltage (FSn pins) | VIMtri | 1 | 1.67 | V | VDD = 2.5 V | 10 | |
| Tri-level input LOW voltage (FSn pins), printed as GND to VDD × 25% | VILtri | 0 | 0.83 | V | VDD = 3.3 V | 10 | |
| Tri-level input LOW voltage (FSn pins), printed as GND to VDD × 25% | VILtri | 0 | 0.63 | V | VDD = 2.5 V | 10 | |
| External clock / crystal input frequency tolerance around 25 MHz | fCLKIN | -1000 | 1000 | ppm | PLL mode; 25 MHz crystal or reference input | 11 | |
| External clock input frequency, PLL bypass mode | fINBP | 1 | 50 | MHz | I2C mode; fin = fout | 11 | |
| Output clock duty cycle, PLL mode, LVPECL | tDC | 47.5 | 50 | 52.5 | % | PLL mode; <1 ns tr/tf; LVPECL fout = 156.25 MHz | 11 |
| Output clock duty cycle, PLL mode, LVCMOS | tDC | 47.5 | 50 | 52.5 | % | PLL mode; LVCMOS fout = 33.33 MHz | 11 |
| Output clock duty cycle, PLL bypass mode | tDC | 45 | 55 | % | PLL bypass mode; input duty cycle 50%, VINPP ≥ 1.2 V | 11 | |
| RMS phase jitter, integer-N output | tjit() | 300 | fs | 25 MHz crystal; integration 12 kHz − 20 MHz; fout = 156.25 MHz, Integer CLKn | 11 | ||
| RMS phase jitter, FRAC-N output | tjit() | 1000 | fs | 25 MHz crystal; integration 12 kHz − 20 MHz; fout = 155.52 MHz, Frac-N CLK4 | 11 | ||
| Differential input voltage swing | VINPP | 100 | 1200 | mV | Differential configuration (Note 14) | 12 | |
| Positive power supply, core | VDD | 3.63 | V | GND = 0 V | 9 | ||
| Positive power supply, analog | AVDDn | 3.63 | V | GND = 0 V | 9 | ||
| Positive power supply, outputs | VDDOn | 3.63 | V | GND = 0 V | 9 | ||
| Positive input/output voltage (printed as −0.5 to VDD + 0.5; max is offset +0.5 from VDD) | VIO | -0.5 | 0.5 | V | GND = 0 V | 9 | |
| Positive input voltage, SDA and SCL | VI | 5.5 | V | GND = 0 V | 9 | ||
| Operating temperature range, QFN-32 | TA | -40 | 85 | °C | QFN-32 | 9 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 9 | ||
| Maximum junction temperature | TJ | 125 | °C | 9 | |||
| Wave solder temperature | Tsol | 265 | °C | Wave solder Pb-Free, 10 sec | 9 | ||
| Thermal resistance, junction-to-ambient | θJA | 31 | °C/W | QFN-32, 0 lfpm; JEDEC 2S2P board (Note 6) | 9 | ||
| Thermal resistance, junction-to-ambient | θJA | 27 | °C/W | QFN-32, 500 lfpm; JEDEC 2S2P board (Note 6) | 9 | ||
| Thermal resistance, junction-to-case | θJC | 12 | °C/W | QFN-32; JEDEC 2S2P board (Note 6) | 9 | ||
| Differential input voltage (VID), printed as 100 to VDD | VID | 100 | mV | Crystal inputs driven differentially (REFMODE = 1) | 10 | ||
| Single-ended input voltage (VIH − VIL), printed as 200 to VDD | VISE | 200 | mV | CLK_XTAL1 driven single-ended (REFMODE = 1) | 10 |
CAD (KiCad official)
- Symbol:
NB3H5150MNTXG - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
nb3h5150mntxg-etched.step/nb3h5150mntxg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nb3h5150mntxg.step/nb3h5150mntxg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (20 pp, sha256
8c3807a25963b513, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# NB3H5150MNTXG
**onsemi** · Clock Generators / Frequency Synthesizers / PLL · QFN-32-EP(5x5)
NB3H5150MNTXG from onsemi, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLK_XTAL2 | input | Crystal output or complementary differential clock input; must be connected to ground when CLK_XTAL1 is used as a single-ended input. |
| 2 | REFMODE | input | Selects the reference input: LOW for a crystal, HIGH for an overdriven single-ended or differential input; has an internal pull-down. |
| 3 | SDA | input | I2C/SMBus serial data input that defaults High when left open, has an internal pull-up, and is 5 V tolerant. |
| 4 | SCL/PD | input | I2C/SMBus serial clock input that defaults High when left open, has an internal pull-up, and is 5 V tolerant; in pin-strap mode only, High powers the device down. |
| 5 | VDD | power_in | 3.3 V or 2.5 V positive supply for the inputs and core; VDD and AVDDn must all be at the same voltage. |
| 6 | FS1 | input | Three-level frequency select for DIV1, CLK1A and CLK1B; default is mid-logic level, with internal pull-up and pull-down (see Table 3). |
| 7 | FS2 | input | Three-level frequency select for DIV2, CLK2A and CLK2B; default is mid-logic level, with internal pull-up and pull-down (see Table 3). |
| 8 | FS3 | input | Three-level frequency select for DIV3, CLK3A and CLK3B; default is mid-logic level, with internal pull-up and pull-down (see Table 3). |
| 9 | FS4A | input | Three-level frequency select A for DIV4, CLK4A and CLK4B; default is mid-logic level, with internal pull-up and pull-down (see Table 4). |
| 10 | FS4B | input | Three-level frequency select B for DIV4, CLK4A and CLK4B; default is mid-logic level, with internal pull-up and pull-down (see Table 4). |
| 11 | LDO4 | power_out | Internal 1.8 V LDO output that requires a power conditioning bypass capacitor to ground (1 µF to 10 µF range for LDOs). |
| 12 | AVDD3 | power_in | 3.3 V or 2.5 V positive supply for analog circuits; equal to VDD. |
| 13 | LDO3 | power_out | Internal 1.8 V LDO output that requires a power conditioning bypass capacitor to ground (1 µF to 10 µF range for LDOs). |
| 14 | CLK4A | output | LVCMOS single-ended or non-inverted differential LVPECL clock A output for channel 4. |
| 15 | CLK4B | output | LVCMOS single-ended or inverted differential LVPECL clock B output for channel 4. |
| 16 | VDDO4 | power_in | 3.3 V, 2.5 V or 1.8 V positive supply for the CLK4A/4B outputs. |
| 17 | MMC | input | Mix mode control pin combining FSn and I2C settings for the CLK(n) outputs in I2C mode; has no logic default, so use a pull-up resistor for High or a pull-down resistor for Low. |
| 18 | CLK3B | output | LVCMOS single-ended or inverted differential LVPECL clock B output for channel 3. |
| 19 | CLK3A | output | LVCMOS single-ended or non-inverted differential LVPECL clock A output for channel 3. |
| 20 | VDDO3 | power_in | 3.3 V, 2.5 V or 1.8 V positive supply for the CLK3A/3B outputs. |
| 21 | VDDO2 | power_in | 3.3 V, 2.5 V or 1.8 V positive supply for the CLK2A/2B outputs. |
| 22 | CLK2A | output | LVCMOS single-ended or non-inverted differential LVPECL clock A output for channel 2. |
| 23 | CLK2B | output | LVCMOS single-ended or inverted differential LVPECL clock B output for channel 2. |
| 24 | FTM | input | Factory test mode pin that must be connected to ground. |
| 25 | VDDO1 | power_in | 3.3 V, 2.5 V or 1.8 V positive supply for the CLK1A/1B outputs. |
| 26 | CLK1B | output | LVCMOS single-ended or inverted differential LVPECL clock B output for channel 1. |
| 27 | CLK1A | output | LVCMOS single-ended or non-inverted differential LVPECL clock A output for channel 1. |
| 28 | AVDD2 | power_in | 3.3 V or 2.5 V positive supply for analog circuits; equal to VDD. |
| 29 | LDO2 | power_out | Internal 1.8 V LDO output that requires a power conditioning bypass capacitor to ground (1 µF to 10 µF range for LDOs). |
| 30 | AVDD1 | power_in | 3.3 V or 2.5 V positive supply for analog circuits; equal to VDD. |
| 31 | LDO1 | power_out | Internal 1.8 V LDO output that requires a power conditioning bypass capacitor to ground (1 µF to 10 µF range for LDOs). |
| 32 | CLK_XTAL1 | input | Crystal input or single-ended/differential clock input; if used single-ended, CLK_XTAL2 must be connected to ground. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | QFN-32-EP(5x5) |
| Category | RTC/Clock Chip |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Core power supply VDD/AVDDn, 3.3 V nominal | VDD/AVDDn | 3.135 | 3.3 | 3.465 | V | VDD = AVDDn = 3.3 V ±5% | 9 |
| Core power supply VDD/AVDDn, 2.5 V nominal | VDD/AVDDn | 2.375 | 2.5 | 2.625 | V | VDD = AVDDn = 2.5 V ±5% | 9 |
| Output power supply VDDOn, 3.3 V nominal | VDDOn | 3.135 | 3.3 | 3.465 | V | VDDOn = 3.3 V ±5% | 9 |
| Output power supply VDDOn, 2.5 V nominal | VDDOn | 2.375 | 2.5 | 2.625 | V | VDDOn = 2.5 V ±5% | 9 |
| Output power supply VDDOn, 1.8 V nominal | VDDOn | 1.71 | 1.8 | 1.89 | V | VDDOn = 1.8 V ±5% (LVCMOS only) | 9 |
| Core and input supply current, CLK4 integer | IDD/IADDn | | 60 | 75 | mA | VDD = 3.3 V, CLK4 Integer | 9 |
| Core and input supply current, CLK4 Frac-N | IDD/IADDn | | 75 | 90 | mA | VDD = 3.3 V, CLK4 Frac-N | 9 |
| Core and input supply current, CLK4 integer | IDD/IADDn | | 55 | 70 | mA | VDD = 2.5 V, CLK4 Integer | 9 |
| Core and input supply current, CLK4 Frac-N | IDD/IADDn | | 70 | 85 | mA | VDD = 2.5 V, CLK4 Frac-N | 9 |
| Output buffer supply current, one LVPECL bank | IDDOn | | 40 | 50 | mA | LVPECL, one differential pair, VDDO = 3.3 V | 9 |
| Output buffer supply current, one LVCMOS bank | IDDOn | | 20 | 25 | mA | LVCMOS, two outputs, VDDO = 3.3 V | 9 |
| Output buffer supply current, one LVCMOS bank | IDDOn | | 17 | 23 | mA | LVCMOS, two outputs, VDDO = 2.5 V | 9 |
| Output buffer supply current, one LVCMOS bank | IDDOn | | 15 | 21 | mA | LVCMOS, two outputs, VDDO = 1.8 V | 9 |
| LVPECL output HIGH voltage (printed as VDDO − 1.200 to VDDO − 0.895; values are the printed offsets from VDDO) | VOH | -1.2 | | -0.895 | V | VDDOn = 3.3 V ±5% or 2.5 V ±5%; See Figure 10 | 9 |
| LVPECL output LOW voltage (printed as VDDO − 2.000 to VDDO − 1.600; values are the printed offsets from VDDO) | VOL | -2 | | -1.6 | V | VDDOn = 3.3 V ±5% or 2.5 V ±5%; See Figure 10 | 9 |
| LVPECL output peak-to-peak voltage swing | VSWING | 550 | 720 | 900 | mV | VOUT PK-PK; VDDOn = 3.3 V ±5% or 2.5 V ±5% | 9 |
| LVCMOS output HIGH voltage (printed as VDDO − 0.5 to VDDO; min is offset −0.5 from VDDO, max printed without a number) | VOH | -0.5 | | | V | IOH = 12 mA; See Figure 12 | 10 |
| LVCMOS output LOW voltage (printed as GND to 0.5) | VOL | | | 0.5 | V | IOL = 12 mA; See Figure 12 | 10 |
| Vth input threshold reference voltage (printed as 100 to VDD − 100; max is offset −100 from VDD) | Vth | 100 | | -100 | mV | Crystal input driven single-ended (REFMODE = 1) | 10 |
| Differential input HIGH voltage (printed as 100 to VDD; min only) | VIHD | 100 | | | mV | Crystal inputs driven differentially (REFMODE = 1) | 10 |
| Input common mode range (printed as 50 to VDD − 50; max is offset −50 from VDD) | VCMR | 50 | | -50 | mV | Differential configuration | 10 |
| Input HIGH current, crystal pins | IIH | -10 | | 10 | µA | CLK_XTAL1 and CLKb_XTAL2 | 10 |
| Input LOW current, crystal pins | IIL | -10 | | 10 | µA | CLK_XTAL1 and CLKb_XTAL2 | 10 |
| Input HIGH voltage for MMC and REFMODE pins | VIH | 2.1 | | | V | VDD = 3.3 V | 10 |
| Input HIGH voltage for MMC and REFMODE pins | VIH | 1.75 | | | V | VDD = 2.5 V | 10 |
| Input HIGH voltage for SDA and SCL/PD pins | VIH | 2.1 | | 5.5 | V | VDD = 3.3 V | 10 |
| Input HIGH voltage for SDA and SCL/PD pins | VIH | 1.75 | | 5.5 | V | VDD = 2.5 V | 10 |
| Input LOW voltage for control pins and SDA and SCL/PD | VIL | | | 0.7 | V | VDD = 3.3 V | 10 |
| Control pin input HIGH current | IIH | -150 | | 150 | µA | Control pins | 10 |
| Control pin input LOW current | IIL | -150 | | 150 | µA | Control pins | 10 |
| Tri-level input HIGH voltage (FSn pins), printed as VDD × 75% to VDD | VIHtri | 2.48 | | | V | VDD = 3.3 V | 10 |
| Tri-level input HIGH voltage (FSn pins), printed as VDD × 75% to VDD | VIHtri | 1.88 | | | V | VDD = 2.5 V | 10 |
| Tri-level input MID voltage (FSn pins) | VIMtri | 1.32 | | 1.98 | V | VDD = 3.3 V | 10 |
| Tri-level input MID voltage (FSn pins) | VIMtri | 1 | | 1.67 | V | VDD = 2.5 V | 10 |
| Tri-level input LOW voltage (FSn pins), printed as GND to VDD × 25% | VILtri | 0 | | 0.83 | V | VDD = 3.3 V | 10 |
| Tri-level input LOW voltage (FSn pins), printed as GND to VDD × 25% | VILtri | 0 | | 0.63 | V | VDD = 2.5 V | 10 |
| External clock / crystal input frequency tolerance around 25 MHz | fCLKIN | -1000 | | 1000 | ppm | PLL mode; 25 MHz crystal or reference input | 11 |
| External clock input frequency, PLL bypass mode | fINBP | 1 | | 50 | MHz | I2C mode; fin = fout | 11 |
| Output clock duty cycle, PLL mode, LVPECL | tDC | 47.5 | 50 | 52.5 | % | PLL mode; <1 ns tr/tf; LVPECL fout = 156.25 MHz | 11 |
| Output clock duty cycle, PLL mode, LVCMOS | tDC | 47.5 | 50 | 52.5 | % | PLL mode; LVCMOS fout = 33.33 MHz | 11 |
| Output clock duty cycle, PLL bypass mode | tDC | 45 | | 55 | % | PLL bypass mode; input duty cycle 50%, VINPP ≥ 1.2 V | 11 |
| RMS phase jitter, integer-N output | tjit() | | | 300 | fs | 25 MHz crystal; integration 12 kHz − 20 MHz; fout = 156.25 MHz, Integer CLKn | 11 |
| RMS phase jitter, FRAC-N output | tjit() | | | 1000 | fs | 25 MHz crystal; integration 12 kHz − 20 MHz; fout = 155.52 MHz, Frac-N CLK4 | 11 |
| Differential input voltage swing | VINPP | 100 | | 1200 | mV | Differential configuration (Note 14) | 12 |
| Positive power supply, core | VDD | | | 3.63 | V | GND = 0 V | 9 |
| Positive power supply, analog | AVDDn | | | 3.63 | V | GND = 0 V | 9 |
| Positive power supply, outputs | VDDOn | | | 3.63 | V | GND = 0 V | 9 |
| Positive input/output voltage (printed as −0.5 to VDD + 0.5; max is offset +0.5 from VDD) | VIO | -0.5 | | 0.5 | V | GND = 0 V | 9 |
| Positive input voltage, SDA and SCL | VI | | | 5.5 | V | GND = 0 V | 9 |
| Operating temperature range, QFN-32 | TA | -40 | | 85 | °C | QFN-32 | 9 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 9 |
| Maximum junction temperature | TJ | | | 125 | °C | | 9 |
| Wave solder temperature | Tsol | | | 265 | °C | Wave solder Pb-Free, 10 sec | 9 |
| Thermal resistance, junction-to-ambient | θJA | | 31 | | °C/W | QFN-32, 0 lfpm; JEDEC 2S2P board (Note 6) | 9 |
| Thermal resistance, junction-to-ambient | θJA | | 27 | | °C/W | QFN-32, 500 lfpm; JEDEC 2S2P board (Note 6) | 9 |
| Thermal resistance, junction-to-case | θJC | | 12 | | °C/W | QFN-32; JEDEC 2S2P board (Note 6) | 9 |
| Differential input voltage (VID), printed as 100 to VDD | VID | 100 | | | mV | Crystal inputs driven differentially (REFMODE = 1) | 10 |
| Single-ended input voltage (VIH − VIL), printed as 200 to VDD | VISE | 200 | | | mV | CLK_XTAL1 driven single-ended (REFMODE = 1) | 10 |
## CAD (KiCad official)
- Symbol: `NB3H5150MNTXG`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm`
- 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `nb3h5150mntxg-etched.step` / `nb3h5150mntxg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `nb3h5150mntxg.step` / `nb3h5150mntxg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/nb3h5150mntx-d.pdf) (20 pp, sha256 `8c3807a25963b513`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/nb3h5150mntxg-datasheet.pdf)