main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs na555dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers na555dr: viewers · Ray
na555dr-etched.fit.json na555dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
na555dr-etched.glb na555dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
na555dr-etched.step na555dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
na555dr.glb Publish 0.1.0 · Ray
na555dr.kicad_mod Publish 0.1.0 · Ray
na555dr.kicad_sym Publish 0.1.0 · Ray
na555dr.lbr Publish 0.1.0 · Ray
na555dr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json na555dr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md na555dr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray

NA555DR

Texas Instruments · Timers / Clock Oscillators · SOIC-8

NA555DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference (0 V). All voltages in the datasheet are with respect to this pin.
2 TRIG input Start-of-timing input. When TRIG falls below 1/2 of CONT (nominally 1/3 VCC), the internal flip-flop is set: OUT goes high and DISCH is released (open).
3 OUT output High-current timer output signal. Can sink or source up to 200 mA; TTL-compatible logic levels with a 5 V supply.
4 RESET input Active-low reset. Forces OUT low and DISCH low regardless of other inputs. Threshold ~0.7 V (min 0.3 V, max 1 V). Tie high (to VCC) when unused.
5 CONT bidirectional Control-voltage pin. Internally biased to 2/3 VCC and sets the comparator thresholds; can be overdriven by an external voltage or bypassed to GND with a 10 nF capacitor to reject supply noise.
6 THRES input End-of-timing input. When THRES rises above CONT (nominally 2/3 VCC), the flip-flop is reset: OUT goes low and DISCH is pulled low. Input current typ 30 nA (max 250 nA).
7 DISCH output Open-collector discharge output. Provides a low-impedance path to GND to discharge the external timing capacitor whenever OUT is low. On-state VCE ~0.15 V typ at 8 mA.
8 VCC power_in Positive supply. Recommended operating range 4.5 V to 16 V (SE555 up to 18 V). Absolute maximum 18 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category RTC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • NA555DR
  • NA555DRD
  • NA555DRP

CAD (KiCad official)

  • Symbol: NA555DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: na555dr-etched.step / na555dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); na555dr.step / na555dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (39 pp, sha256 c6f5275b8c31eb1d, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF