main
Ray
Publish 0.1.0
399fa29
N79E814AT20
Nuvoton Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20
N79E814AT20 from Nuvoton Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.0/KB0/PWM3/SPICLK | bidirectional | Port 0 bit 0 quasi-bidirectional I/O with alternate functions KB0 keyboard input, PWM3 output and SPICLK SPI-1 clock. |
| 2 | P1.7/ICPCLK/MOSI/PWM2 | bidirectional | Port 1 bit 7 I/O with alternate functions PWM2 output, ICPCLK in-circuit programming clock and MOSI SPI-1 pin, with 38 mA LED drive capability. |
| 3 | P1.6/ICPDAT/MISO/PWM1 | bidirectional | Port 1 bit 6 I/O with alternate functions PWM1 output, ICPDAT in-circuit programming data and MISO SPI-1 pin, with 38 mA LED drive capability. |
| 4 | /RST | input | Active-low Schmitt-trigger reset input with an internal pull-up of about 200 kOhm, so it must not float and needs an external 100 Ohm resistor and 10 uF capacitor to ground as the datasheet states. |
| 5 | VSS | power_in | Ground. |
| 6 | P3.1/XTAL1 | bidirectional | Port 3 bit 1 I/O that serves as external crystal pin XTAL1 and cannot be used as general I/O when an external crystal is used. |
| 7 | P3.0/XTAL2/CLKOUT | bidirectional | Port 3 bit 0 I/O that serves as external crystal pin XTAL2 or as CLKOUT output of internal RC oscillator divided by 4. |
| 8 | P1.4//INT1/STADC//SS | bidirectional | Port 1 bit 4 I/O with alternate functions /INT1 external interrupt 1, STADC ADC start trigger input and /SS SPI-1 slave select. |
| 9 | P1.3//INT0/SDA | bidirectional | Port 1 bit 3 open-drain-only I/O that is always open-drain for I2C, with alternate functions /INT0 external interrupt 0 and SDA. |
| 10 | P1.2/T0/SCL/IC0 | bidirectional | Port 1 bit 2 open-drain-only I/O that is always open-drain for I2C, with alternate functions T0 timer 0 external input, SCL and IC0 capture input. |
| 11 | P1.1/RXD | bidirectional | Port 1 bit 1 I/O with alternate function RXD UART receive, with 38 mA LED drive capability. |
| 12 | P1.0/TXD | bidirectional | Port 1 bit 0 I/O with alternate function TXD UART transmit, with 38 mA LED drive capability. |
| 13 | P0.7/T1/ADC6/KB7/IC1 | bidirectional | Port 0 bit 7 I/O with alternate functions T1 timer 1 external input, ADC6 analog input channel, KB7 keyboard input and IC1 capture input. |
| 14 | P0.6/ADC5/KB6 | bidirectional | Port 0 bit 6 I/O with alternate functions ADC5 analog input channel and KB6 keyboard input. |
| 15 | VDD | power_in | Power supply input for operating voltage VDD, specified for 2.4 V to 5.5 V operation depending on clock source and frequency. |
| 16 | P0.5/ADC4/KB5 | bidirectional | Port 0 bit 5 I/O with alternate functions ADC4 analog input channel and KB5 keyboard input. |
| 17 | P0.4/ADC3/KB4 | bidirectional | Port 0 bit 4 I/O with alternate functions ADC3 analog input channel and KB4 keyboard input. |
| 18 | P0.3/ADC2/KB3 | bidirectional | Port 0 bit 3 I/O with alternate functions ADC2 analog input channel and KB3 keyboard input. |
| 19 | P0.2/BRAKE/ADC1/KB2 | bidirectional | Port 0 bit 2 I/O with alternate functions BRAKE PWM brake input, ADC1 analog input channel and KB2 keyboard input. |
| 20 | P0.1/PWM0/ADC0/KB1 | bidirectional | Port 0 bit 1 I/O with alternate functions PWM0 output, ADC0 analog input channel and KB1 keyboard input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nuvoton Tech |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
N79E814AT20 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
n79e814at20-etched.step/n79e814at20-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);n79e814at20.step/n79e814at20.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nuvoton Tech datasheet (179 pp, sha256
d6a503318845ce88, retrieved 2026-10-31, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# N79E814AT20
**Nuvoton Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20
N79E814AT20 from Nuvoton Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.0/KB0/PWM3/SPICLK | bidirectional | Port 0 bit 0 quasi-bidirectional I/O with alternate functions KB0 keyboard input, PWM3 output and SPICLK SPI-1 clock. |
| 2 | P1.7/ICPCLK/MOSI/PWM2 | bidirectional | Port 1 bit 7 I/O with alternate functions PWM2 output, ICPCLK in-circuit programming clock and MOSI SPI-1 pin, with 38 mA LED drive capability. |
| 3 | P1.6/ICPDAT/MISO/PWM1 | bidirectional | Port 1 bit 6 I/O with alternate functions PWM1 output, ICPDAT in-circuit programming data and MISO SPI-1 pin, with 38 mA LED drive capability. |
| 4 | /RST | input | Active-low Schmitt-trigger reset input with an internal pull-up of about 200 kOhm, so it must not float and needs an external 100 Ohm resistor and 10 uF capacitor to ground as the datasheet states. |
| 5 | VSS | power_in | Ground. |
| 6 | P3.1/XTAL1 | bidirectional | Port 3 bit 1 I/O that serves as external crystal pin XTAL1 and cannot be used as general I/O when an external crystal is used. |
| 7 | P3.0/XTAL2/CLKOUT | bidirectional | Port 3 bit 0 I/O that serves as external crystal pin XTAL2 or as CLKOUT output of internal RC oscillator divided by 4. |
| 8 | P1.4//INT1/STADC//SS | bidirectional | Port 1 bit 4 I/O with alternate functions /INT1 external interrupt 1, STADC ADC start trigger input and /SS SPI-1 slave select. |
| 9 | P1.3//INT0/SDA | bidirectional | Port 1 bit 3 open-drain-only I/O that is always open-drain for I2C, with alternate functions /INT0 external interrupt 0 and SDA. |
| 10 | P1.2/T0/SCL/IC0 | bidirectional | Port 1 bit 2 open-drain-only I/O that is always open-drain for I2C, with alternate functions T0 timer 0 external input, SCL and IC0 capture input. |
| 11 | P1.1/RXD | bidirectional | Port 1 bit 1 I/O with alternate function RXD UART receive, with 38 mA LED drive capability. |
| 12 | P1.0/TXD | bidirectional | Port 1 bit 0 I/O with alternate function TXD UART transmit, with 38 mA LED drive capability. |
| 13 | P0.7/T1/ADC6/KB7/IC1 | bidirectional | Port 0 bit 7 I/O with alternate functions T1 timer 1 external input, ADC6 analog input channel, KB7 keyboard input and IC1 capture input. |
| 14 | P0.6/ADC5/KB6 | bidirectional | Port 0 bit 6 I/O with alternate functions ADC5 analog input channel and KB6 keyboard input. |
| 15 | VDD | power_in | Power supply input for operating voltage VDD, specified for 2.4 V to 5.5 V operation depending on clock source and frequency. |
| 16 | P0.5/ADC4/KB5 | bidirectional | Port 0 bit 5 I/O with alternate functions ADC4 analog input channel and KB5 keyboard input. |
| 17 | P0.4/ADC3/KB4 | bidirectional | Port 0 bit 4 I/O with alternate functions ADC3 analog input channel and KB4 keyboard input. |
| 18 | P0.3/ADC2/KB3 | bidirectional | Port 0 bit 3 I/O with alternate functions ADC2 analog input channel and KB3 keyboard input. |
| 19 | P0.2/BRAKE/ADC1/KB2 | bidirectional | Port 0 bit 2 I/O with alternate functions BRAKE PWM brake input, ADC1 analog input channel and KB2 keyboard input. |
| 20 | P0.1/PWM0/ADC0/KB1 | bidirectional | Port 0 bit 1 I/O with alternate functions PWM0 output, ADC0 analog input channel and KB1 keyboard input. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nuvoton Tech |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
## CAD (KiCad official)
- Symbol: `N79E814AT20`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `n79e814at20-etched.step` / `n79e814at20-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `n79e814at20.step` / `n79e814at20.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nuvoton Tech datasheet](docs/n79e814at20-datasheet.pdf) (179 pp, sha256 `d6a503318845ce88`, retrieved 2026-10-31, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/n79e814at20-datasheet.pdf)