Generated by kicad-footprint-generator · KiCad file format 20260206
N32G401F8S7-1
Nations Technologies Inc · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20
N32G401F8S7-1 from Nations Technologies Inc, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PD0-BOOT0 | bidirectional | I/O port with FT (5 V tolerant) function; BOOT0 is an input pull-down at reset and selects the startup mode together with option byte BOOT. |
| 2 | PD14-OSC_IN | bidirectional | FTa I/O (5 V tolerant with analog function); serves as the HSE oscillator input OSC_IN, with alternates USART2_TX, I2C2_SDA and TIM1_CH3N. |
| 3 | PD15-OSC_OUT | bidirectional | FTa I/O (5 V tolerant with analog function); serves as the HSE oscillator output OSC_OUT, with alternates USART2_RX, I2C2_SCL and TIM1_CH2N. |
| 4 | NRST | input | Active-low reset input with an internal pull-up of 30 to 70 kΩ (50 kΩ typical at VDD = 3.3 V). |
| 5 | VDDA | power_in | Analog supply for the ADC and COMP, 2.4 V to 3.6 V, which must be connected to VDD. |
| 6 | PA0 | bidirectional | FTa I/O (5 V tolerant with analog function); provides ADC_IN1, COMP1_INM/COMP1_INP and WKUP2 functions. |
| 7 | PA1 | bidirectional | FTa I/O (5 V tolerant with analog function); provides ADC1_IN2, COMP1_INP, USART2_RTS and TIM5_CH2 functions. |
| 8 | PA2 | bidirectional | FTa I/O (5 V tolerant with analog function); provides ADC_IN3, COMP2_INM, USART2_TX and TIM8_BKIN functions. |
| 9 | PA3 | bidirectional | FTa I/O (5 V tolerant with analog function); provides ADC_IN4, COMP2_INP, USART2_RX and TIM8_CH2 functions. |
| 10 | PA4 | bidirectional | FTa I/O (5 V tolerant with analog function); provides ADC_IN5, COMP1_INM/COMP2_INM, SPI1_NSS and USART1_TX functions. |
| 11 | PA5 | bidirectional | FTa I/O (5 V tolerant with analog function); provides ADC_IN6, COMP1_INM/COMP2_INM, SPI1_SCK and USART1_RX functions. |
| 12 | PA6 | bidirectional | FTa I/O (5 V tolerant with analog function); provides ADC_IN7, COMP2_INM/COMP2_INP, SPI1_MISO and BEEPER_OUT_P functions. |
| 13 | PA7 | bidirectional | FTa I/O (5 V tolerant with analog function); provides ADC_IN8, COMP2_INP, COMP3_INM, SPI1_MOSI and BEEPER_OUT_N functions. |
| 14 | PB1 | bidirectional | FTa I/O (5 V tolerant with analog function); provides ADC_IN10, COMP3_INP, TIM1_CH3N and UART4_RX functions. |
| 15 | VSS | power_in | Ground reference for the I/O and core supply; all supply and ground pins must be connected to the external supply system. |
| 16 | VDD | power_in | I/O pin and internal regulator supply, 2.4 V to 3.6 V. |
| 17 | PA9 | bidirectional | General-purpose I/O on GPIOA; the detailed alternate-function list is on datasheet pages not included in the provided text. |
| 18 | PA10 | bidirectional | General-purpose I/O on GPIOA; the detailed alternate-function list is on datasheet pages not included in the provided text. |
| 19 | PA13 | bidirectional | I/O shared with JTMS/SWDIO, which is pulled up after reset; if used as a non-debug input before STANDBY entry, add external pull-up/pull-down of 10 kΩ or less. |
| 20 | PA14 | bidirectional | I/O shared with JTCK/SWCLK, which is pulled down after reset; if used as a non-debug input before STANDBY entry, add external pull-up/pull-down of 10 kΩ or less. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nations Technologies Inc |
| Package | TSSOP-20 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input high-level voltage, TTL port | VIH | 2 | 5.5 | V | TTL port | 58 | |
| Input low-level voltage, TTL port | VIL | 0.8 | V | TTL port | 58 | ||
| Input low-level voltage, CMOS port | VIL | 0.35 | VDD | CMOS port | 58 | ||
| Input high-level voltage, CMOS port | VIH | 0.65 | VDD | CMOS port | 58 | ||
| Schmitt trigger voltage hysteresis | Vhys | 200 | mV | VDD = 3.3 V / 2.5 V | 58 | ||
| Input leakage current | Ilkg | -1 | 1 | μA | VDD=Maximum, VPAD = 0 or VPAD = VDD | 58 | |
| Weak pull-up equivalent resistance | RPU | 80 | 220 | KΩ | VDD = 3.3 V, VIN = VSS | 58 | |
| Weak pull-up equivalent resistance | RPU | 90 | 300 | KΩ | VDD = 2.5 V, VIN = VSS | 58 | |
| Weak pull-down equivalent resistance | RPD | 80 | 220 | KΩ | VDD = 3.3 V, VIN = VDD | 58 | |
| Weak pull-down equivalent resistance | RPD | 90 | 300 | KΩ | VDD = 2.5 V, VIN = VDD | 58 | |
| I/O pin capacitance | CIO | 5 | pF | 58 | |||
| Output low-level voltage | VOL | 0.4 | V | VDD = 3.3 V, IOL = 2mA, 4mA, 8mA, and 12mA | 59 | ||
| Output high-level voltage | VOH | 2.4 | V | VDD = 3.3 V, IOH = -2mA, -4mA, -8mA, and -12mA | 59 | ||
| Output high-level voltage | VOH | 1.8 | V | VDD = 2.5 V, IOL = -1.5mA, -3mA, -7mA, and -11mA (as printed) | 59 | ||
| Input high-level voltage, NRST | VIH(NRST) | 2 | V | VDD = 3.3 V | 61 | ||
| Input low-level voltage, NRST | VIL(NRST) | 0.8 | V | VDD = 3.3 V | 61 | ||
| Weak pull-up equivalent resistance, NRST | RPU | 30 | 50 | 70 | KΩ | VDD = 3.3 V | 61 |
| NRST input filtered pulse | VF(NRST) | 100 | ns | 61 | |||
| NRST input non-filtered pulse | VNF(NRST) | 300 | ns | 61 | |||
| Reset pulse duration generated | TNRST_OUT | 10 | 13 | μs | Internal reset source | 61 | |
| EXTI detected external signal pulse width | tEXTIpw | 10 | ns | 60 | |||
| Maximum frequency, output | fmax(IO)out | 75 | MHz | GPIOx_DS 00 (2mA), CL = 5 pF, VDD = 3.3 V | 59 | ||
| Maximum frequency, output | fmax(IO)out | 50 | MHz | GPIOx_DS 00 (2mA), CL = 5 pF, VDD = 2.5 V | 59 | ||
| Output delay (A to pad) | t(IO)out | 3.66 | ns | GPIOx_DS 00 (2mA), CL = 5 pF, VDD = 3.3 V | 59 | ||
| Output delay (A to pad) | t(IO)out | 4.72 | ns | GPIOx_DS 00 (2mA), CL = 5 pF, VDD = 2.5 V | 59 | ||
| Maximum frequency, output | fmax(IO)out | 90 | MHz | GPIOx_DS 10 (4mA), CL = 10 pF, VDD = 3.3 V | 59 | ||
| Maximum frequency, output | fmax(IO)out | 60 | MHz | GPIOx_DS 10 (4mA), CL = 10 pF, VDD = 2.5 V | 59 | ||
| Output delay (A to pad) | t(IO)out | 3.5 | ns | GPIOx_DS 10 (4mA), CL = 10 pF, VDD = 3.3 V | 59 | ||
| Output delay (A to pad) | t(IO)out | 4.5 | ns | GPIOx_DS 10 (4mA), CL = 10 pF, VDD = 2.5 V | 59 | ||
| Maximum frequency, output | fmax(IO)out | 100 | MHz | GPIOx_DS 01 (8mA), CL = 20 pF, VDD = 3.3 V | 59 | ||
| Output delay (A to pad) | t(IO)out | 3.42 | ns | GPIOx_DS 01 (8mA), CL = 20 pF, VDD = 3.3 V | 59 | ||
| Output delay (A to pad) | t(IO)out | 4.37 | ns | GPIOx_DS 01 (8mA), CL = 20 pF, VDD = 2.5 V | 59 | ||
| Maximum frequency, output | fmax(IO)out | 120 | MHz | GPIOx_DS 11 (12mA), CL = 30 pF, VDD = 3.3 V | 59 | ||
| Output delay (A to pad) | t(IO)out | 3.34 | ns | GPIOx_DS 11 (12mA), CL = 30 pF, VDD = 3.3 V | 59 | ||
| Input delay (pad to Y) | t(IO)in | 2 | ns | CL = 50 fF, VDD = 2.97 V, VDDD = 0.81 V; input characteristics at 2.5V is derated | 59 | ||
| WWDG minimum/maximum count reset time, prescaler /1 | 0.128 | 2089 | ms | APB1 PCLK1 = 32MHz; prescaler /1 (TBMERB 00); min W=0x3F, max W=0x3FFF | 63 | ||
| WWDG minimum/maximum count reset time, prescaler /2 | 0.256 | 4178 | ms | APB1 PCLK1 = 32MHz; prescaler /2 (TBMERB 01); min W=0x3F, max W=0x3FFF | 63 | ||
| WWDG minimum/maximum count reset time, prescaler /3 | 0.512 | 8356 | ms | APB1 PCLK1 = 32MHz; prescaler /3 (TBMERB 10); min W=0x3F, max W=0x3FFF | 63 | ||
| WWDG minimum/maximum count reset time, prescaler /4 | 1.024 | 16712 | ms | APB1 PCLK1 = 32MHz; prescaler /4 (TBMERB 11); min W=0x3F, max W=0x3FFF | 63 | ||
| I2C interface frequency, standard mode | fSCL | 0 | 100 | KHz | Standard mode | 63 | |
| I2C interface frequency, fast mode | fSCL | 0 | 400 | KHz | Fast mode | 63 | |
| I2C interface frequency, fast+ mode | fSCL | 0 | 1000 | KHz | Fast+ mode | 63 | |
| SDA setup time, standard mode | tsu(SDA) | 250 | ns | Standard mode | 63 | ||
| SDA setup time, fast mode | tsu(SDA) | 100 | ns | Fast mode | 63 | ||
| SDA setup time, fast+ mode | tsu(SDA) | 50 | ns | Fast+ mode | 63 | ||
| Stop condition setup time, standard mode | tsu(STO) | 4 | μs | Standard mode | 63 | ||
| Stop condition setup time, fast mode | tsu(STO) | 0.6 | μs | Fast mode | 63 | ||
| Stop condition setup time, fast+ mode | tsu(STO) | 0.26 | μs | Fast+ mode | 63 | ||
| Capacitive load per bus line, standard mode | Cb | 400 | pf | Standard mode | 63 | ||
| Capacitive load per bus line, fast mode | Cb | 400 | pf | Fast mode | 63 | ||
| Capacitive load per bus line, fast+ mode | Cb | 100 | pf | Fast+ mode | 63 | ||
| Data valid time, standard mode | tv(SDA) | 3.45 | μs | Standard mode | 63 | ||
| Data valid time, fast mode | tv(SDA) | 0.9 | μs | Fast mode | 63 | ||
| Data valid time, fast+ mode | tv(SDA) | 0.45 | μs | Fast+ mode | 63 |
CAD (KiCad official)
- Symbol:
N32G401F8S7-1 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
n32g401f8s7-1-etched.step/n32g401f8s7-1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);n32g401f8s7-1.step/n32g401f8s7-1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nations Technologies Inc datasheet (85 pp, sha256
e42e7dc766743c16, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).