main
Ray
Publish 0.1.0
ef2595c
N32G031F8S7
Nations Technologies Inc · Microcontrollers (MCU/MPU/SOC) · TSSOP-20
N32G031F8S7 from Nations Technologies Inc, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PF2-BOOT0 | input | Dedicated BOOT0 pin that selects the boot memory; it defaults to pull-down input mode after reset. |
| 2 | PF0-OSC_IN | bidirectional | Standard 5V I/O (TC) that defaults to floating input after reset and is multiplexed to the HSE oscillator input OSC_IN (4 to 20 MHz crystal), also with I2C1_SDA and OPAMP_VINP. |
| 3 | PF1-OSC_OUT | bidirectional | Standard 5V I/O (TC) multiplexed to the HSE oscillator output OSC_OUT, also with I2C1_SCL, USART1_CK and USART2_CK. |
| 4 | NRST | input | Active-low device reset input with an embedded weak pull-up (RPU 30 to 50 kΩ); the pin also serves as internal reset output. |
| 5 | VDDA | power_in | Analog power supply, 1.8 V to 5.5 V, which must equal VDD (difference up to 300 mV allowed during power-up and normal operation). |
| 6 | PA0 | bidirectional | Standard 5V I/O (TC) with ADC_IN0, WKUP0 wake-up, COMP_INM and OPAMP_VINP alternate functions, plus USART and SPI options. |
| 7 | PA1 | bidirectional | Standard 5V I/O (TC) with ADC_IN1, COMP_INP and OPAMP_VINP alternate functions, plus USART1_RTS, SPI1_NSS and TIM8_CH2 options. |
| 8 | PA2 | bidirectional | Standard 5V I/O (TC) with ADC_IN2, WKUP2 wake-up and OPAMP_VINM alternate functions, plus USART1_TX, USART2_TX and SPI1_MOSI options. |
| 9 | PA3 | bidirectional | Standard 5V I/O (TC) with ADC_IN3 and COMP_INP alternate functions, plus USART1_RX, USART2_RX and TIM1_CH2 options. |
| 10 | PA4 | bidirectional | Standard 5V I/O (TC) with ADC_IN4, COMP_INM and OPAMP_VINP alternate functions, plus SPI1_MISO, USART1_CK and TIM3_CH1 options. |
| 11 | PA5 | bidirectional | Standard 5V I/O (TC) with ADC_IN5, COMP_INM and OPAMP_VINM alternate functions, plus SPI1_SCK, TIM1_CH2N and TIM8_ETR options. |
| 12 | PA6 | bidirectional | Standard 5V I/O (TC) with ADC_IN6, COMP_OUT and OPAMP_VOUT alternate functions, plus SPI1_MISO, TIM3_CH1, BEEPER_OUT and LPTIM_ETR options. |
| 13 | PA7 | bidirectional | Standard 5V I/O (TC) with ADC_IN7, OPAMP_VINP and COMP_INP alternate functions, plus SPI1_MOSI, TIM3_CH2, TIM1_CH1N and BEEPER_N_OUT options. |
| 14 | PB1 | bidirectional | Standard 5V I/O (TC) port PB1 as shown on the TSSOP20 pin diagram; its alternate-function row is not in the supplied datasheet text. |
| 15 | VSS | power_in | Ground pin for the digital supply domain. |
| 16 | VDD | power_in | Digital power supply, 1.8 V to 5.5 V, feeding the main regulator, I/O and clock/reset system. |
| 17 | PA9 | bidirectional | Standard 5V I/O (TC) with USART1_TX, TIM1_CH2, I2C1_SCL, I2C2_SCL, SPI2_SCK and MCO alternate functions. |
| 18 | PA10 | bidirectional | Standard 5V I/O (TC) with USART1_RX, TIM1_CH3, I2C1_SDA, I2C2_SDA, SPI2_MISO and RTC_REFIN alternate functions. |
| 19 | PA13 | bidirectional | Standard 5V I/O (TC) used as SWDIO serial-wire debug data; it is placed in input pull-up mode after reset. |
| 20 | PA14 | bidirectional | Standard 5V I/O (TC) used as SWCLK serial-wire debug clock; it is placed in input pull-down mode after reset. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nations Technologies Inc |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
N32G031F8S7 - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
n32g031f8s7-etched.step/n32g031f8s7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);n32g031f8s7.step/n32g031f8s7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nations Technologies Inc datasheet (74 pp, sha256
db4aab771ff95019, retrieved 2026-11-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# N32G031F8S7
**Nations Technologies Inc** · Microcontrollers (MCU/MPU/SOC) · TSSOP-20
N32G031F8S7 from Nations Technologies Inc, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PF2-BOOT0 | input | Dedicated BOOT0 pin that selects the boot memory; it defaults to pull-down input mode after reset. |
| 2 | PF0-OSC_IN | bidirectional | Standard 5V I/O (TC) that defaults to floating input after reset and is multiplexed to the HSE oscillator input OSC_IN (4 to 20 MHz crystal), also with I2C1_SDA and OPAMP_VINP. |
| 3 | PF1-OSC_OUT | bidirectional | Standard 5V I/O (TC) multiplexed to the HSE oscillator output OSC_OUT, also with I2C1_SCL, USART1_CK and USART2_CK. |
| 4 | NRST | input | Active-low device reset input with an embedded weak pull-up (RPU 30 to 50 kΩ); the pin also serves as internal reset output. |
| 5 | VDDA | power_in | Analog power supply, 1.8 V to 5.5 V, which must equal VDD (difference up to 300 mV allowed during power-up and normal operation). |
| 6 | PA0 | bidirectional | Standard 5V I/O (TC) with ADC_IN0, WKUP0 wake-up, COMP_INM and OPAMP_VINP alternate functions, plus USART and SPI options. |
| 7 | PA1 | bidirectional | Standard 5V I/O (TC) with ADC_IN1, COMP_INP and OPAMP_VINP alternate functions, plus USART1_RTS, SPI1_NSS and TIM8_CH2 options. |
| 8 | PA2 | bidirectional | Standard 5V I/O (TC) with ADC_IN2, WKUP2 wake-up and OPAMP_VINM alternate functions, plus USART1_TX, USART2_TX and SPI1_MOSI options. |
| 9 | PA3 | bidirectional | Standard 5V I/O (TC) with ADC_IN3 and COMP_INP alternate functions, plus USART1_RX, USART2_RX and TIM1_CH2 options. |
| 10 | PA4 | bidirectional | Standard 5V I/O (TC) with ADC_IN4, COMP_INM and OPAMP_VINP alternate functions, plus SPI1_MISO, USART1_CK and TIM3_CH1 options. |
| 11 | PA5 | bidirectional | Standard 5V I/O (TC) with ADC_IN5, COMP_INM and OPAMP_VINM alternate functions, plus SPI1_SCK, TIM1_CH2N and TIM8_ETR options. |
| 12 | PA6 | bidirectional | Standard 5V I/O (TC) with ADC_IN6, COMP_OUT and OPAMP_VOUT alternate functions, plus SPI1_MISO, TIM3_CH1, BEEPER_OUT and LPTIM_ETR options. |
| 13 | PA7 | bidirectional | Standard 5V I/O (TC) with ADC_IN7, OPAMP_VINP and COMP_INP alternate functions, plus SPI1_MOSI, TIM3_CH2, TIM1_CH1N and BEEPER_N_OUT options. |
| 14 | PB1 | bidirectional | Standard 5V I/O (TC) port PB1 as shown on the TSSOP20 pin diagram; its alternate-function row is not in the supplied datasheet text. |
| 15 | VSS | power_in | Ground pin for the digital supply domain. |
| 16 | VDD | power_in | Digital power supply, 1.8 V to 5.5 V, feeding the main regulator, I/O and clock/reset system. |
| 17 | PA9 | bidirectional | Standard 5V I/O (TC) with USART1_TX, TIM1_CH2, I2C1_SCL, I2C2_SCL, SPI2_SCK and MCO alternate functions. |
| 18 | PA10 | bidirectional | Standard 5V I/O (TC) with USART1_RX, TIM1_CH3, I2C1_SDA, I2C2_SDA, SPI2_MISO and RTC_REFIN alternate functions. |
| 19 | PA13 | bidirectional | Standard 5V I/O (TC) used as SWDIO serial-wire debug data; it is placed in input pull-up mode after reset. |
| 20 | PA14 | bidirectional | Standard 5V I/O (TC) used as SWCLK serial-wire debug clock; it is placed in input pull-down mode after reset. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nations Technologies Inc |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
## CAD (KiCad official)
- Symbol: `N32G031F8S7`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `n32g031f8s7-etched.step` / `n32g031f8s7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `n32g031f8s7.step` / `n32g031f8s7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Nations Technologies Inc datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589834392576294912) (74 pp, sha256 `db4aab771ff95019`, retrieved 2026-11-08, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/n32g031f8s7-datasheet.pdf)