N32G030F8S7

{
  "schema_version": 1,
  "type": "component",
  "slug": "n32g030f8s7",
  "title": "N32G030F8S7",
  "brief": "Nations Technologies Inc Microcontrollers (MCU/MPU/SOC), TSSOP-20(6.5x4.4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "n32g030f8s7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "N32G030F8S7",
    "manufacturer": "Nations Technologies Inc",
    "package": "TSSOP-20(6.5x4.4)",
    "pin_count": 20,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757121731746652160",
    "parts": {
      "symbol": "n32g030f8s7.kicad_sym",
      "footprint": "n32g030f8s7.kicad_mod",
      "model_3d": "n32g030f8s7-hero.glb",
      "model_3d_plain": "n32g030f8s7-etched.glb",
      "model_3d_step": "n32g030f8s7-etched.step",
      "model_3d_step_plain": "n32g030f8s7.step",
      "lbr": "n32g030f8s7.lbr"
    },
    "distributor_links": {
      "lcsc": "C19269710"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T16:54:34Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PF2-BOOT0",
        "type": "input",
        "description": "Dedicated BOOT0 pin used for boot memory selection; it defaults to a pull-down input after reset."
      },
      {
        "number": "2",
        "name": "PF0-OSC_IN",
        "type": "bidirectional",
        "description": "I/O (standard 5V I/O) that defaults to floating input after reset and can be muxed to the HSE OSC_IN function; alternate functions include I2C1_SDA, with additional functions OSC_IN and OPAMP_VINP."
      },
      {
        "number": "3",
        "name": "PF1-OSC_OUT",
        "type": "bidirectional",
        "description": "Standard 5V I/O with alternate functions I2C1_SCL, USART1_CK and USART2_CK, and additional function OSC_OUT."
      },
      {
        "number": "4",
        "name": "NRST",
        "type": "input",
        "description": "Active-low device reset input and internal reset output with an internal pull-up (30-50 kΩ); the NRST input filters pulses shorter than 100 ns at 1.8-3.6 V."
      },
      {
        "number": "5",
        "name": "VDDA",
        "type": "power_in",
        "description": "Analog power supply, which must be connected to VDD (operating range 1.8 V to 5.5 V)."
      },
      {
        "number": "6",
        "name": "PA0",
        "type": "bidirectional",
        "description": "Standard 5V I/O with alternate functions including USART1_CTS/USART2_CTS, SPI1_SCK, I2S_CK, LPUART_TX/RX and TIM8_CH1, and additional functions ADC_IN0, WKUP0, COMP_INM, COMP_OUT and OPAMP_VINP; it cannot be remapped to OSC_IN."
      },
      {
        "number": "7",
        "name": "PA1",
        "type": "bidirectional",
        "description": "Standard 5V I/O with alternate functions including USART1_RTS, USART2_RTS, SPI1_NSS, I2S_WS, LPTIM_IN2 and TIM8_CH2, and additional functions ADC_IN1, COMP_INP and OPAMP_VINP."
      },
      {
        "number": "8",
        "name": "PA2",
        "type": "bidirectional",
        "description": "Standard 5V I/O with alternate functions including USART1_TX, USART2_TX, SPI1_MOSI, I2S_SD and TIM1_BKIN, and additional functions ADC_IN2, WKUP2 and OPAMP_VINM."
      },
      {
        "number": "9",
        "name": "PA3",
        "type": "bidirectional",
        "description": "Standard 5V I/O with alternate functions including USART1_RX, USART2_RX, SPI1_MISO, I2S_MCK and TIM1_CH2, and additional functions ADC_IN3 and COMP_INP."
      },
      {
        "number": "10",
        "name": "PA4",
        "type": "bidirectional",
        "description": "Standard 5V I/O with alternate functions including SPI1_NSS, I2S_WS, USART1_CK, USART2_CK, I2C1_SCL and TIM1_CH1, and additional functions ADC_IN4, COMP_INM and OPAMP_VINP."
      },
      {
        "number": "11",
        "name": "PA5",
        "type": "bidirectional",
        "description": "Standard 5V I/O with alternate functions including SPI1_SCK, I2S_CK, SPI1_MOSI, I2C_SD, TIM1_CH2N and TIM8_CH1, and additional functions ADC_IN5, COMP_INM and OPAMP_VINM."
      },
      {
        "number": "12",
        "name": "PA6",
        "type": "bidirectional",
        "description": "Standard 5V I/O with alternate functions including SPI1_MISO, TIM3_CH1, TIM1_BKIN, TIM8_CH1, LPUART_CTS, I2C2_SCL and BEEPER_OUT, and additional functions ADC_IN6, COMP_OUT and OPAMP_VOUT."
      },
      {
        "number": "13",
        "name": "PA7",
        "type": "bidirectional",
        "description": "Standard 5V I/O with alternate functions including SPI1_MOSI, SPI2_NSS, I2S_SD, TIM3_CH2, TIM1_CH1N, LPUART_RX, I2C2_SDA and BEEPER_N_OUT, and additional functions ADC_IN7, OPAMP_VINP and COMP_INP."
      },
      {
        "number": "14",
        "name": "PB1",
        "type": "bidirectional",
        "description": "Pin labelled PB1 in the TSSOP20 pinout figure; its pin-definition row is not in the extracted text, so its alternate functions and limits are not stated here."
      },
      {
        "number": "15",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground pin for the digital circuitry."
      },
      {
        "number": "16",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital power supply with a standard operating voltage range of 1.8 V to 5.5 V."
      },
      {
        "number": "17",
        "name": "PA9",
        "type": "bidirectional",
        "description": "Standard 5V I/O with alternate functions including USART1_TX, USART2_TX, TIM1_CH2, TIM8_BKIN, I2C1_SCL, I2C2_SCL, SPI2_SCK and LPTIM_OUT."
      },
      {
        "number": "18",
        "name": "PA10",
        "type": "bidirectional",
        "description": "Standard 5V I/O with alternate functions including USART1_RX, USART2_RX, TIM1_CH3, TIM8_BKIN, I2C1_SDA, I2C2_SDA, SPI2_MISO and RTC_REFIN."
      },
      {
        "number": "19",
        "name": "PA13 (SWDIO)",
        "type": "bidirectional",
        "description": "Standard 5V I/O used as the SWDIO debug data pin, which is placed in input pull-up mode after reset."
      },
      {
        "number": "20",
        "name": "PA14 (SWCLK)",
        "type": "bidirectional",
        "description": "Standard 5V I/O used as the SWCLK debug clock pin, which is placed in input pull-down mode after reset."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN N32G030F8S7 does not appear in the datasheet ordering table (page 3 lists N32G030F6U7 and N3; Pin 14 is unassigned in the extracted table 3-1 TSSOP20 column. Its label PB1 comes only from figure; Pin 1 (PF2-BOOT0) is listed as type 'I' with I/O structure 'B' (dedicated BOOT0 pin) in table 3-1. M"
        ],
        "pages_sent": 55,
        "cost_usd": 0.2098,
        "at": "2026-10-18T16:54:17"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757121731746652160",
        "pages": 74,
        "sha256": "0d81f4bc145923c4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "n32g030f8s7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "n32g030f8s7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "29f999e5e50194ef9d6e59d37255c76a42d1a6737fbdeaf4aac58f6815b7ec8d",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Nations Technologies Inc",
      "Package": "TSSOP-20(6.5x4.4)",
      "Category": "Embedded Processors & Controllers",
      "Pins": "20"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "n32g030f8s7"
  ],
  "discovery_pitch": "N32G030F8S7 (Nations Technologies Inc) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "n32g030f8s7.kicad_sym",
    "n32g030f8s7.kicad_mod",
    "n32g030f8s7.glb",
    "n32g030f8s7.step",
    "n32g030f8s7.lbr",
    "docs/hero.png",
    "docs/n32g030f8s7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "n32g030f8s7-hero.glb",
    "n32g030f8s7-hero.overlay.json",
    "n32g030f8s7-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}