MY18B20LD10

{
 "schema": "adom.pads/1",
 "slug": "my18b20ld10",
 "footprint": "TO-92_Inline",
 "generated_from": {
  "footprint": "TO-92_Inline@sha256:19731cf8b8c297aa",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   0.0,
   0.0
  ],
  "corner": "bottom-right",
  "source": "pad-position",
  "derived_from": "TO-92_Inline@sha256:19731cf8b8c297aa"
 },
 "pad_count": 3,
 "symbol_pins": [
  "1",
  "2",
  "3"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "thru_hole",
   "shape": "rect",
   "at": [
    0.0,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.05,
    1.5
   ],
   "layers": [],
   "thermal": false,
   "pin": "1",
   "name": "GND",
   "type": "power_in",
   "description": "Ground reference for the device. Connect to system ground.",
   "is_pin1": true,
   "source": {
    "geometry": "TO-92_Inline.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "thru_hole",
   "shape": "oval",
   "at": [
    1.27,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.05,
    1.5
   ],
   "layers": [],
   "thermal": false,
   "pin": "2",
   "name": "DQ",
   "type": "bidirectional",
   "description": "1-Wire single-bus digital data I/O. Open-drain / three-state, requires an external pull-up resistor (typ. 10 kΩ, or 1 kΩ for long-cable / multi-drop configurations). Carries all command, ROM ID and temperature traffic; can also parasite-power the device on short lines.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-92_Inline.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "thru_hole",
   "shape": "oval",
   "at": [
    2.54,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.05,
    1.5
   ],
   "layers": [],
   "thermal": false,
   "pin": "3",
   "name": "VDD",
   "type": "power_in",
   "description": "Supply voltage input, 1.8 V to 5.5 V (recommend ≥3.3 V for long-cable or multi-drop operation). Typical standby current 0.2 µA @5 V; average 5 µA @1 Hz sampling.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-92_Inline.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}