main
Ray
Publish 0.1.0
99e0023
MXHV9910BE
Littelfuse/IXYS · LED Drivers · SOIC-8
MXHV9910BE from Littelfuse/IXYS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin for the internal regulator, rated for 8 VDC to 450 VDC operation with an absolute maximum of -0.5 V to +460 V to GND. |
| 2 | CS | input | LED current sense input whose internal threshold is 250 mV (VCS(high) 200 mV to 280 mV), with the external sense resistor setting the maximum LED current. |
| 3 | GND | power_in | Device ground; the exposed thermal pad of the MXHV9910BE must be electrically connected to this pin. |
| 4 | GATE | output | External MOSFET gate driver output, with a high-level output of at least VDD-0.3 V at 10 mA and an absolute maximum of VDD+0.3 V. |
| 5 | PWMD | input | Low-frequency PWM dimming control input with an internal pull-down (115 kΩ typical), requiring VIH of at least 2.4 V and VIL of at most 0.5 V. |
| 6 | VDD | power_out | Regulated supply output of 7.2 V to 8.4 V that requires a storage capacitor to GND, supplies up to 2 mA to external circuitry, and may be overdriven by an external voltage of 12 V maximum. |
| 7 | LD | input | Linear dimming input, where a voltage below VCS(high) reduces the LED current, with an absolute maximum of VDD+0.3 V. |
| 8 | RT | passive | Resistor-to-GND input that sets the oscillator and primary PWM frequency (for example, 400 kΩ gives 64 kHz typical). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Littelfuse/IXYS |
| Package | SOIC-8 |
| Category | LED Drivers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage to GND | VIN | -0.5 | 460 | V | 3 | ||
| Inputs & Outputs Voltage to GND (CS, LD, PWMD, GATE) | -0.3 | V | 3 | ||||
| Externally Applied VDD | VDD.EXT | 15 | V | 3 | |||
| Power Dissipation, SOIC-8 With Thermal Tab | PD | 2.5 | W | 3 | |||
| Maximum Junction Temperature | TJmax | 150 | °C | 3 | |||
| Operating Temperature (absolute maximum table) | TA | -40 | 85 | °C | 3 | ||
| Junction Temperature (Operating) | TJ | -40 | 150 | °C | 3 | ||
| Storage Temperature | TSTG | -55 | 150 | °C | 3 | ||
| Input Voltage Range | VIN | 8 | 450 | VDC | 4 | ||
| Operating Temperature | TA | -40 | 85 | °C | 4 | ||
| Input DC Voltage Range | VIN | 8 | 450 | VDC | 4 | ||
| Shut-Down Mode Supply Current | IINSD | 0.3 | 0.6 | mA | PWMD to GND, VIN=15 to 450V | 4 | |
| Maximum Voltage to VDD Pin | VDDmax | 12 | V | External voltage applied to VDD Pin | 4 | ||
| Internal Voltage Regulator Output | VDD | 7.2 | 7.8 | 8.4 | VDC | VIN=15V to 450V, IDD(ext)=0, GATE Output=Open | 4 |
| VDD Current Available for External Circuitry | IDD(ext) | 2 | mA | 4 | |||
| VDD Load Regulation | VDD | 200 | mV | VIN=15V, IL=1mA | 4 | ||
| PWMD Input Low Voltage | VEN(low) | 0.5 | V | VIN=8V to 450V | 4 | ||
| PWMD Input High Voltage | VEN(high) | 2.4 | V | VIN=8V to 450V | 4 | ||
| PWMD Pull-Down Resistance | REN | 70 | 115 | 165 | k | VIN=12V, VPWMD=VDD | 4 |
| Current Sense (CS) Input Current, CS Low | IIL | -45 | -90 | A | CS=0V | 4 | |
| Current Sense (CS) Input Current, CS High | IIH | -15 | 0 | 15 | A | CS=VDD | 4 |
| Current Sense Threshold Voltage | VCS(high) | 200 | 280 | mV | -40°C < TA < 85°C | 4 | |
| Oscillator Frequency (Gate Driver) | fS | 51 | 64 | 77 | kHz | RT=400k | 4 |
| Gate Low Output Voltage | VGATE(lo) | 0.03 | 0.3 | V | IOUT=10mA | 4 | |
| PWMD Frequency | fPWMD | 500 | Hz | 4 | |||
| Current Sense Blanking Interval | tBLANK | 400 | ns | RT=400k | 4 | ||
| Delay from CS Trip to Gate Low | tDELAY | 300 | ns | RT=400k | 4 | ||
| Gate Output Rise Time | tRISE | 16 | ns | CGATE=500pF | 4 | ||
| Gate Output Fall Time | tFALL | 7 | ns | CGATE=500pF | 4 | ||
| Thermal Resistance, Junction-to-Ambient, SOIC-8 With Thermal Pad (BE) | RθJA | 50 | °C/W | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time | 10 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
MXHV9910BE - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8, generated on the KiCad land (body 3.937 x 4.928 mm, terminals on the pads, 1.346 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
mxhv9910be-etched.step/mxhv9910be-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mxhv9910be.step/mxhv9910be.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Littelfuse/IXYS datasheet (13 pp, sha256
0145ef3e32245b0c, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# MXHV9910BE
**Littelfuse/IXYS** · LED Drivers · SOIC-8
MXHV9910BE from Littelfuse/IXYS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin for the internal regulator, rated for 8 VDC to 450 VDC operation with an absolute maximum of -0.5 V to +460 V to GND. |
| 2 | CS | input | LED current sense input whose internal threshold is 250 mV (VCS(high) 200 mV to 280 mV), with the external sense resistor setting the maximum LED current. |
| 3 | GND | power_in | Device ground; the exposed thermal pad of the MXHV9910BE must be electrically connected to this pin. |
| 4 | GATE | output | External MOSFET gate driver output, with a high-level output of at least VDD-0.3 V at 10 mA and an absolute maximum of VDD+0.3 V. |
| 5 | PWMD | input | Low-frequency PWM dimming control input with an internal pull-down (115 kΩ typical), requiring VIH of at least 2.4 V and VIL of at most 0.5 V. |
| 6 | VDD | power_out | Regulated supply output of 7.2 V to 8.4 V that requires a storage capacitor to GND, supplies up to 2 mA to external circuitry, and may be overdriven by an external voltage of 12 V maximum. |
| 7 | LD | input | Linear dimming input, where a voltage below VCS(high) reduces the LED current, with an absolute maximum of VDD+0.3 V. |
| 8 | RT | passive | Resistor-to-GND input that sets the oscillator and primary PWM frequency (for example, 400 kΩ gives 64 kHz typical). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Littelfuse/IXYS |
| Package | SOIC-8 |
| Category | LED Drivers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage to GND | VIN | -0.5 | | 460 | V | | 3 |
| Inputs & Outputs Voltage to GND (CS, LD, PWMD, GATE) | | -0.3 | | | V | | 3 |
| Externally Applied VDD | VDD.EXT | | | 15 | V | | 3 |
| Power Dissipation, SOIC-8 With Thermal Tab | PD | | | 2.5 | W | | 3 |
| Maximum Junction Temperature | TJmax | | | 150 | °C | | 3 |
| Operating Temperature (absolute maximum table) | TA | -40 | | 85 | °C | | 3 |
| Junction Temperature (Operating) | TJ | -40 | | 150 | °C | | 3 |
| Storage Temperature | TSTG | -55 | | 150 | °C | | 3 |
| Input Voltage Range | VIN | 8 | | 450 | VDC | | 4 |
| Operating Temperature | TA | -40 | | 85 | °C | | 4 |
| Input DC Voltage Range | VIN | 8 | | 450 | VDC | | 4 |
| Shut-Down Mode Supply Current | IINSD | | 0.3 | 0.6 | mA | PWMD to GND, VIN=15 to 450V | 4 |
| Maximum Voltage to VDD Pin | VDDmax | | | 12 | V | External voltage applied to VDD Pin | 4 |
| Internal Voltage Regulator Output | VDD | 7.2 | 7.8 | 8.4 | VDC | VIN=15V to 450V, IDD(ext)=0, GATE Output=Open | 4 |
| VDD Current Available for External Circuitry | IDD(ext) | | | 2 | mA | | 4 |
| VDD Load Regulation | VDD | | | 200 | mV | VIN=15V, IL=1mA | 4 |
| PWMD Input Low Voltage | VEN(low) | | | 0.5 | V | VIN=8V to 450V | 4 |
| PWMD Input High Voltage | VEN(high) | 2.4 | | | V | VIN=8V to 450V | 4 |
| PWMD Pull-Down Resistance | REN | 70 | 115 | 165 | k | VIN=12V, VPWMD=VDD | 4 |
| Current Sense (CS) Input Current, CS Low | IIL | | -45 | -90 | A | CS=0V | 4 |
| Current Sense (CS) Input Current, CS High | IIH | -15 | 0 | 15 | A | CS=VDD | 4 |
| Current Sense Threshold Voltage | VCS(high) | 200 | | 280 | mV | -40°C < TA < 85°C | 4 |
| Oscillator Frequency (Gate Driver) | fS | 51 | 64 | 77 | kHz | RT=400k | 4 |
| Gate Low Output Voltage | VGATE(lo) | | 0.03 | 0.3 | V | IOUT=10mA | 4 |
| PWMD Frequency | fPWMD | | 500 | | Hz | | 4 |
| Current Sense Blanking Interval | tBLANK | | 400 | | ns | RT=400k | 4 |
| Delay from CS Trip to Gate Low | tDELAY | | 300 | | ns | RT=400k | 4 |
| Gate Output Rise Time | tRISE | | 16 | | ns | CGATE=500pF | 4 |
| Gate Output Fall Time | tFALL | | 7 | | ns | CGATE=500pF | 4 |
| Thermal Resistance, Junction-to-Ambient, SOIC-8 With Thermal Pad (BE) | RθJA | | 50 | | °C/W | | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | | Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time | 10 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `MXHV9910BE`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8, generated on the KiCad land (body 3.937 x 4.928 mm, terminals on the pads, 1.346 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `mxhv9910be-etched.step` / `mxhv9910be-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mxhv9910be.step` / `mxhv9910be.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Littelfuse/IXYS datasheet](docs/mxhv9910be-datasheet.pdf) (13 pp, sha256 `0145ef3e32245b0c`, retrieved 2026-11-13, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/mxhv9910be-datasheet.pdf)