component
MX9352
Public Made by Adomby adom
Mixic LED Drivers, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MX9352
Mixic · LED Drivers · SOT-23-6
MX9352 from Mixic, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Power switch drain (LX node) of the internal FET; absolute maximum pin voltage is 20 V, and the pin floats in an LED open-circuit condition. |
| 2 | GND | power_in | Ground reference; the datasheet recommends a good ground connection for the chip GND and a separate return for the input bypass capacitor. |
| 3 | IRC | output | Open-drain IR-CUT output that must be pulled up through a resistor to an appropriate potential; it is logic high when the chip is enabled (EN low) and logic low when disabled (EN high), with VIRC absolute maximum 20 V and output low of 0.2 V max at 1 mA. |
| 4 | EN | input | Chip enable input; logic high (≥2.5 V) turns the chip off and logic low (≤1.2 V) turns it on, with an absolute maximum pin voltage of 20 V. |
| 5 | VIN | power_in | Chip supply input, operating from 3 V to 17 V (12 V typical), with an absolute maximum pin voltage of 20 V; the input bypass capacitor must be placed as close to this pin as possible. |
| 6 | SEN | input | Current sense input; the LED current is set by a resistor RS connected between VIN and SEN (ILED = 0.1 V / RSEN, RSEN ≥ 0.083 Ω), and the sense voltage must not exceed VIN ± 0.7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Mixic |
| Package | SOT-23-6 |
| Category | LED Drivers |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 各引脚电压 VIN、VLX、VEN、VIRC (pin voltage max) | 20 | V | 2 | ||||
| 采样端电压 Sense pin voltage (VSEN) | VSEN | -0.7 | 0.7 | V | Printed as VIN±0.7 V, i.e. relative to VIN | 2 | |
| 热损耗 Power dissipation | PD | 0.55 | W | 2 | |||
| 封装热阻抗 Thermal resistance junction-to-ambient, SOT23-6 | θJA | 180 | ℃/W | SOT23-6 package | 2 | ||
| 最高工作结温 Maximum operating junction temperature | TJ | 125 | ℃ | 2 | |||
| 焊接温度 Soldering temperature | 260 | ℃ | 10 S | 2 | |||
| 储存温度范围 Storage temperature | Tstg | -65 | 150 | ℃ | 2 | ||
| 电源电压 Supply voltage | VIN | 3 | 12 | 17 | V | 3 | |
| 结温范围 Junction temperature range | TJ | -40 | 125 | ℃ | VIN=12V | 3 | |
| 工作温度范围 Operating ambient temperature | TA | -40 | 85 | ℃ | 3 | ||
| VIN 输入电压 Input voltage | VIN | 3 | 12 | 17 | V | 3 | |
| IQ 静态电流 Quiescent current | IQ | 200 | uA | EN=0V | 3 | ||
| ISHDN 关断电流 Shutdown current | ISHDN | 30 | uA | EN=3V | 3 | ||
| VREF 内部参考电压 Internal reference voltage (VIN-VSEN) | VREF | 100 | mV | VIN -VSEN | 3 | ||
| R(DS)ON FET 低导通内阻 On-resistance | R(DS)ON | 100 | mΩ | 3 | |||
| ILIMI FET 主电流限制 Main current limit | ILIMI | 2 | A | 3 | |||
| VIHEN EN 输入高电平 EN high-level input | VIHEN | 2.5 | V | 3 | |||
| VILEN EN 输入低电平 EN low-level input | VILEN | 1.2 | V | 3 | |||
| IIRC IRC 输出低电平 IRC output low level | IIRC | 0.2 | V | IIRC=1mA | 3 | ||
| VIN.UVLO上升阈值 UVLO rising threshold | VIN.UVLO | 2.5 | V | 3 | |||
| UVLO.HYS UVLO 迟滞 UVLO hysteresis | UVLO.HYS | 0.2 | V | 3 | |||
| FSW 开关频率 Switching frequency | FSW | 0.8 | 1 | 1.2 | MHZ | 3 | |
| TON.MIN 最小开启时间 Minimum on-time | TON.MIN | 100 | nS | 3 | |||
| DMAX 最大占空比 Maximum duty cycle | DMAX | 90 | % | 3 | |||
| TSD Thermal shutdown temperature | TSD | 150 | ℃ | 3 | |||
| THYS Thermal shutdown hysteresis | THYS | 20 | ℃ | 3 |
CAD (KiCad official)
- Symbol:
MX9352 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mx9352-etched.step/mx9352-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx9352.step/mx9352.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Mixic datasheet (8 pp, sha256
f79969afb6d8c8ee, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MX9352
**Mixic** · LED Drivers · SOT-23-6
MX9352 from Mixic, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Power switch drain (LX node) of the internal FET; absolute maximum pin voltage is 20 V, and the pin floats in an LED open-circuit condition. |
| 2 | GND | power_in | Ground reference; the datasheet recommends a good ground connection for the chip GND and a separate return for the input bypass capacitor. |
| 3 | IRC | output | Open-drain IR-CUT output that must be pulled up through a resistor to an appropriate potential; it is logic high when the chip is enabled (EN low) and logic low when disabled (EN high), with VIRC absolute maximum 20 V and output low of 0.2 V max at 1 mA. |
| 4 | EN | input | Chip enable input; logic high (≥2.5 V) turns the chip off and logic low (≤1.2 V) turns it on, with an absolute maximum pin voltage of 20 V. |
| 5 | VIN | power_in | Chip supply input, operating from 3 V to 17 V (12 V typical), with an absolute maximum pin voltage of 20 V; the input bypass capacitor must be placed as close to this pin as possible. |
| 6 | SEN | input | Current sense input; the LED current is set by a resistor RS connected between VIN and SEN (ILED = 0.1 V / RSEN, RSEN ≥ 0.083 Ω), and the sense voltage must not exceed VIN ± 0.7 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Mixic |
| Package | SOT-23-6 |
| Category | LED Drivers |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 各引脚电压 VIN、VLX、VEN、VIRC (pin voltage max) | | | | 20 | V | | 2 |
| 采样端电压 Sense pin voltage (VSEN) | VSEN | -0.7 | | 0.7 | V | Printed as VIN±0.7 V, i.e. relative to VIN | 2 |
| 热损耗 Power dissipation | PD | | | 0.55 | W | | 2 |
| 封装热阻抗 Thermal resistance junction-to-ambient, SOT23-6 | θJA | | | 180 | ℃/W | SOT23-6 package | 2 |
| 最高工作结温 Maximum operating junction temperature | TJ | | | 125 | ℃ | | 2 |
| 焊接温度 Soldering temperature | | | | 260 | ℃ | 10 S | 2 |
| 储存温度范围 Storage temperature | Tstg | -65 | | 150 | ℃ | | 2 |
| 电源电压 Supply voltage | VIN | 3 | 12 | 17 | V | | 3 |
| 结温范围 Junction temperature range | TJ | -40 | | 125 | ℃ | VIN=12V | 3 |
| 工作温度范围 Operating ambient temperature | TA | -40 | | 85 | ℃ | | 3 |
| VIN 输入电压 Input voltage | VIN | 3 | 12 | 17 | V | | 3 |
| IQ 静态电流 Quiescent current | IQ | | | 200 | uA | EN=0V | 3 |
| ISHDN 关断电流 Shutdown current | ISHDN | | | 30 | uA | EN=3V | 3 |
| VREF 内部参考电压 Internal reference voltage (VIN-VSEN) | VREF | | 100 | | mV | VIN -VSEN | 3 |
| R(DS)ON FET 低导通内阻 On-resistance | R(DS)ON | | 100 | | mΩ | | 3 |
| ILIMI FET 主电流限制 Main current limit | ILIMI | | 2 | | A | | 3 |
| VIHEN EN 输入高电平 EN high-level input | VIHEN | | 2.5 | | V | | 3 |
| VILEN EN 输入低电平 EN low-level input | VILEN | | 1.2 | | V | | 3 |
| IIRC IRC 输出低电平 IRC output low level | IIRC | | 0.2 | | V | IIRC=1mA | 3 |
| VIN.UVLO上升阈值 UVLO rising threshold | VIN.UVLO | | 2.5 | | V | | 3 |
| UVLO.HYS UVLO 迟滞 UVLO hysteresis | UVLO.HYS | | 0.2 | | V | | 3 |
| FSW 开关频率 Switching frequency | FSW | 0.8 | 1 | 1.2 | MHZ | | 3 |
| TON.MIN 最小开启时间 Minimum on-time | TON.MIN | | 100 | | nS | | 3 |
| DMAX 最大占空比 Maximum duty cycle | DMAX | | 90 | | % | | 3 |
| TSD Thermal shutdown temperature | TSD | | 150 | | ℃ | | 3 |
| THYS Thermal shutdown hysteresis | THYS | | 20 | | ℃ | | 3 |
## CAD (KiCad official)
- Symbol: `MX9352`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `mx9352-etched.step` / `mx9352-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mx9352.step` / `mx9352.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Mixic datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588913194965848064) (8 pp, sha256 `f79969afb6d8c8ee`, retrieved 2026-10-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mx9352-datasheet.pdf)