main
Ray Publish 0.1.0 73b7cd2

MX35LF4G24AD-Z4I

MXIC(Macronix) · NAND FLASH · WSON-8(6x8)

MX35LF4G24AD-Z4I from MXIC(Macronix), in a WSON-8(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select input; the device is active from a correct command until the next CS# rising edge, and an incorrect command keeps it in standby until the next CS# falling edge.
2 SO/SIO1 bidirectional Serial Data Output for 1 x I/O, or Serial Data Input & Output for 1-1-2, 1-1-4, 1-2-2 or 1-4-4 modes; High-Z in standby mode.
3 WP#/SIO2 bidirectional Write protection (connect to GND) or Serial Data Input & Output for 1-1-4 or 1-4-4 mode.
4 GND power_in Ground.
5 SI/SIO0 bidirectional Serial Data Input for 1 x I/O, or Serial Data Input & Output for 1-1-2, 1-1-4, 1-2-2 or 1-4-4 modes.
6 SCLK input Clock input; input data is latched on the rising edge and output data shifts out on the falling edge, supporting serial mode 0 and mode 3.
7 HOLD#/SIO3 bidirectional Hold or Serial Data Input & Output for 1-1-4 or 1-4-4 mode.
8 VCC power_in +3V power supply; the MX35LF4G24AD-Z4I is specified for a 2.7V to 3.6V VCC range.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer MXIC(Macronix)
Package WSON-8(6x8)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Temperature under bias -50 125 °C 56
Storage temperature -65 150 °C 56
All input voltages with respect to ground -0.6 4.6 V Note 2 56
VCC supply voltage with respect to ground VCC -0.6 4.6 V Note 2 56
ESD protection 2000 V >2000V 56
Operating temperature -40 85 °C Operating Range 57
VCC supply voltage VCC 2.7 3.3 3.6 V Operating Range 57
Input capacitance CIN 10 pF TA=+25°C, F=1MHz, VIN=0V; 10pF for 4Gb 57
Output capacitance COUT 10 pF TA=+25°C, F=1MHz, VOUT=0V; 10pF for 4Gb 57
Input leakage current ILI -10 10 uA VIN= 0 to VCC Max. 58
Output leakage current ILO -10 10 uA VOUT= 0 to VCC Max. 58
VCC standby current (CMOS) ISB1 15 50 uA VIN=VCC or GND, CS#=VCC 58
VCC active current (Sequential Read) ICC1 20 30 mA f=120MHz, Iout = 0mA 58
VCC active current (Program) ICC2 20 30 mA 58
VCC active current (Erase) ICC3 15 30 mA 58
Input low level VIL -0.3 0.2 V max printed as 0.2VCC 58
Output low voltage VOL 0.2 V IOL= -1mA 58
Serial Clock Frequency for all command fC 0 120 MHz Note 1; min printed D.C. 58
CS# Diselect Time tCS 30 ns 58
Output Disable Time tDIS 7 ns 58
Serial Clock Low to Output Valid (30pF) tV 7 ns 30pF 58
Serial Clock Low to Output Valid (15pF) tV 6 ns 15pF 58
Output Hold Time tHO 1 ns 58
Data In Setup Time tSUDAT 2 ns 58
Data Input Hold Time tHDDAT 2 ns 58
Serial Clock High Time tWH 3.75 ns 58
Serial Clock Low Time tWL 3.75 ns 58
Write protect Hold Time tWPH 100 ns 58
Write protect Setup Time tWPS 20 ns 58
VCC(min.) to device operation tVSL 5 ms 58
Page programming time (Randomizer disabled) tPROG 320 700 us 59
Page programming time (Randomizer enabled) tPROG_RAND 360 740 us 59
Block Erase Time tERASE 4 6 ms 59
Dummy busy time for cache read tRCBSY 4.5 25 us 59
Data transfer from array to buffer tRD 25 us 59
VCC voltage needs to be below VPWD for proper initialization VPWD 0.9 V 55
Voltage threshold for re-initialization V_keep 2.4 V if VDD drops below V_KEEP 55
Minimum duration to ensure initialization tPWD 300 us 55
Write Inhibit Voltage VWI 2 2.4 V 55

CAD (KiCad official)

  • Symbol: MX35LF4G24AD-Z4I
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8(6x8), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm nominal WSON height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: mx35lf4g24ad-z4i-etched.step / mx35lf4g24ad-z4i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx35lf4g24ad-z4i.step / mx35lf4g24ad-z4i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC(Macronix) datasheet (65 pp, sha256 94c96deab0c16fbf, retrieved 2026-10-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF