main
Ray Publish 0.1.0 0b0a85b

MX35LF2GE4AD-Z4I

MXIC(Macronix) · NAND FLASH · WSON-8

MX35LF2GE4AD-Z4I from MXIC(Macronix), in a WSON-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip select; per Device Operation, a CS# falling edge starts a command and the device stays in active mode until the next CS# rising edge.
2 SO/SIO1 bidirectional Serial data output in 1 x I/O mode and serial data input and output (SIO1) in 1-1-2, 1-1-4, 1-2-2 or 1-4-4 modes, with data shifting out on the SCLK falling edge.
3 WP#/SIO2 bidirectional Write protection pin to be connected to GND, or serial data input and output (SIO2) in 1-1-4 or 1-4-4 modes.
4 GND power_in Ground reference for the device.
5 SI/SIO0 bidirectional Serial data input in 1 x I/O mode and serial data input and output (SIO0) in 1-1-2, 1-1-4, 1-2-2 or 1-4-4 modes, with data latched on the SCLK rising edge.
6 SCLK input Serial clock input; input data is latched on its rising edge and output data shifts out on its falling edge.
7 HOLD#/SIO3 bidirectional Hold input, or serial data input and output (SIO3) in 1-1-4 or 1-4-4 modes.
8 VCC power_in Power supply; the ordering information lists the L voltage option as 2.7V to 3.6V (3V device).
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer MXIC(Macronix)
Package WSON-8
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC supply voltage VCC 2.7 3.6 V Operating range -40°C to +85°C, +3.3V tolerance 66
Operating temperature -40 85 °C Industrial grade (I) operating range 66
VCC supply voltage with respect to ground VCC -0.6 4.6 V With respect to ground (Note 2) 65
All input voltages with respect to ground -0.6 4.6 V With respect to ground (Note 2) 65
Temperature under bias -50 125 °C 65
Storage temperature -65 150 °C 65
ESD protection 2000 V Printed as >2000V 65
Voltage overshoot below Vss during transitions -2 V Voltage transitions, up to 20ns (Note 3) 65
VCC voltage for proper power-up initialization VPWD 0.9 V VCC must be below VPWD for proper initialization 64
Voltage threshold for re-initialization on VCC drop V_keep 2.4 V Re-initialization needed if VCC drops below V_keep 64
Minimum duration to ensure power-on initialization tPWD 300 us Characterized only 64
Write inhibit voltage VWI 2 2.4 V 64
Input leakage current ILI -10 10 uA VIN = 0 to VCC MAX 67
Output leakage current ILO -10 10 uA VOUT = 0 to VCC MAX 67
VCC standby current (CMOS) ISB1 110 uA VIN=VCC or GND, CS#=VCC 67
VCC active current ICC1 20 40 mA f=133MHz, Iout = 0mA 67
VCC active current ICC1 16 30 mA f=80MHz, Iout = 0mA 67
VCC active current (Read for continuous read operation) ICC2 30 50 mA f=104MHz, Iout = 0mA 67
VCC active current (Read for continuous read operation) ICC2 28 40 mA f=80MHz, Iout = 0mA 67
VCC active current (Program) ICC3 30 40 mA 67
VCC active current (Erase) ICC4 25 30 mA 67
Input low level VIL -0.3 V Printed maximum is 0.2VCC (not a fixed number) 67
Output low voltage VOL 0.2 V IOL = 1mA 67
Data transfer time from array to data register (2Gb) tRD 70 us 2Gb 68
Data transfer time from array to data register for OTP page (2Gb) tRD_OTP 75 us 2Gb 68
Dummy busy time for cache read (2Gb) tRCBSY 50 70 us 2Gb 68
Page programming time (2Gb) tPROG 360 760 us 2Gb 68
Block erase time (2Gb) tERS 4 6 ms 2Gb 68
Serial clock frequency for all commands fC 133 MHz Non-continuous read, 8WSON only (fC=133MHz column) 67
HOLD# hold time relative to SCLK tCHHH 3.375 ns fC=133MHz 67
HOLD hold time relative to SCLK tCHHL 3.375 ns fC=133MHz 67
CS# disselect time tCS 30 ns fC=133MHz 67
CS# active hold time relative to SCLK tCHSH 3.375 ns fC=133MHz 67
CS# active setup time relative to SCLK tSLCH 3.375 ns fC=133MHz 67
CS# not active setup time relative to SCLK tSHCH 3.375 ns fC=133MHz 67
CS# not active hold time relative to SCLK tCHSL 3.375 ns fC=133MHz 67
Output disable time tDIS 20 ns fC=133MHz 67
HOLD setup time relative to SCLK tHC 3.375 ns fC=133MHz 67
HOLD# setup time relative to SCLK tHD 3.375 ns fC=133MHz 67
Data input hold time tHDDAT 2 ns fC=133MHz 67
Output hold time tHO 1 ns fC=133MHz 67
HOLD# to output high-Z tHZ 15 ns fC=133MHz 67
HOLD# to output low-Z tLZ 15 ns fC=133MHz 67
Data in setup time tSUDAT 2 ns fC=133MHz 67
Serial clock low to output valid tV 8 ns 30pF load, fC=133MHz 67
Serial clock low to output valid tV 6 ns 10pF load, fC=133MHz 67
Write protect hold time tWPH 100 ns fC=133MHz 67
Write protect setup time tWPS 20 ns fC=133MHz 67
Clock rise time (peak to peak) tCRT 1.3 V/ns Peak to peak; printed as 1.3 in the min column per review note 67
Clock fall time (peak to peak) tCFT 1.3 V/ns Peak to peak; printed as 1.3 in the min column per review note 67
VCC(min.) to device operation tVSL 5 ms 67
Input capacitance CIN 6 pF TA=+25°C, F=1MHz, VIN=0V 66
Output capacitance COUT 8 pF TA=+25°C, F=1MHz, VOUT=0V 66

CAD (KiCad official)

  • Symbol: MX35LF2GE4AD-Z4I
  • Footprint: Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm
  • 3D model: WSON-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: mx35lf2ge4ad-z4i-etched.step / mx35lf2ge4ad-z4i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx35lf2ge4ad-z4i.step / mx35lf2ge4ad-z4i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC(Macronix) datasheet (75 pp, sha256 2fb869a39fff4b11, retrieved 2026-11-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF