component
MX25V4006EM1I-13G
Public Made by Adomby adom
MXIC Macronix NOR FLASH, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMX25V4006EM1I-13G
MXIC Macronix · NOR FLASH · SOP-8
MX25V4006EM1I-13G from MXIC Macronix, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select, active-low. Enables serial access to the device when driven low; when high the device is deselected and SO is High-Z (standby mode). |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for standard 1x SPI (SO); becomes bidirectional SIO1 in Dual Output read mode (DREAD, command 3Bh). Data is shifted on the falling edge of SCLK in output mode. |
| 3 | WP# | input | Write Protect, active-low. In Hardware Protection Mode (HPM), WP# going low protects the Status Register BP0-BP2 and SRWD bits from being changed. |
| 4 | GND | power_in | Ground reference (0V) for the device. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for standard 1x SPI (SI); becomes bidirectional SIO0 in Dual Output read mode. Input data is latched on the rising edge of SCLK. |
| 6 | SCLK | input | Serial Clock input. Supports SPI Mode 0 (CPOL=0, CPHA=0) and Mode 3 (CPOL=1, CPHA=1). Max 75MHz for standard read; 70MHz for Dual Output read. |
| 7 | HOLD# | input | Hold input, active-low. When asserted low with CS# low and SCLK low, pauses serial communications without deselecting the device (SO becomes High-Z). Does not stop in-progress WRSR/program/erase operations. |
| 8 | VCC | power_in | Power supply input, +2.5V nominal (2.35V to 3.6V operating range for read, erase, and program). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC Macronix |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
MX25V4006EM1I-13GMX25V4006EM1I-13GM2IMX25V4006EM1I-13GZUIMX25V4006EM1I-13GUI
CAD (KiCad official)
- Symbol:
MX25V4006EM1I-13G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC Macronix datasheet (52 pp, sha256
60510f79b577f09f, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).