main
Ray
Publish 0.1.0
0332658
MX25V1006FZUI
MXIC(Macronix) · Pre-ordered Products · USON-8
MX25V1006FZUI from MXIC(Macronix), in a USON-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input that enables serial access to the device; when high the device is in standby mode. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for 1 x I/O, or Serial Data Input & Output for Dual output mode. |
| 3 | WP# | input | Write Protection input; it stays internally pulled up when not physically connected, and the pull-up is disabled if connected. |
| 4 | GND | power_in | Ground. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for 1 x I/O, or Serial Data Input & Output for Dual output mode. |
| 6 | SCLK | input | Serial clock input. |
| 7 | NC | unconnected | No connect pin. |
| 8 | VCC | power_in | +3.3V power supply, with a voltage range of 2.3V to 3.6V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | USON-8 |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Load Current | ILI | -2 | 0.02 | 2 | uA | VCC = VCC Max; VIN = VCC or GND | 42 |
| Output Leakage Current | ILO | -2 | 0.02 | 2 | uA | VCC = VCC Max; VOUT = VCC or GND | 42 |
| VCC Standby Current | ISB1 | 5 | 25 | uA | VIN = VCC or GND; CS#=VCC | 42 | |
| VCC Read | ICC1 | 6 | mA | f=50MHz; SCLK=0.1VCC/0.9VCC; SO=Open | 42 | ||
| VCC Program Current (PP) | ICC2 | 5 | 20 | mA | Program in Progress; CS#=VCC | 42 | |
| VCC Write Status Register (WRSR) Current | ICC3 | 2.1 | 15 | mA | Program status register in progress; CS#=VCC | 42 | |
| VCC Sector Erase Current (SE) | ICC4 | 5 | 15 | mA | Erase in Progress; CS#=VCC | 42 | |
| VCC Chip Erase Current (CE) | ICC5 | 5 | 20 | mA | Erase in Progress; CS#=VCC | 42 | |
| Output Low Voltage | VOL | 0.4 | V | IOL = 1.6mA | 42 | ||
| Low VCC Write Inhibit Voltage | VWI | 1.5 | 2.1 | V | 42 | ||
| Deep Power-down Current | ISB2 | 10 | uA | VIN = VCC or GND; CS#=VCC | 42 | ||
| Input Capacitance | CIN | 6 | pF | VIN = 0V | 40 | ||
| Output Capacitance | COUT | 8 | pF | VOUT = 0V | 40 | ||
| Clock Frequency (fast-read, PP, SE, BE, CE, DP, RES, RDP, WREN, WRDI, RDID, RDSR, WRSR) | fSCLK | 80 | MHz | 2.7-3.6V | 43 | ||
| Clock Frequency (fast-read, PP, SE, BE, CE, DP, RES, RDP, WREN, WRDI, RDID, RDSR, WRSR) | fSCLK | 50 | MHz | 2.3-2.7V | 43 | ||
| Clock Frequency for READ instructions | fRSCLK | 33 | MHz | 43 | |||
| Clock Frequency for DREAD instructions | fTSCLK | 80 | MHz | 2.7-3.6V | 43 | ||
| Clock Frequency for DREAD instructions | fTSCLK | 50 | MHz | 2.3-2.7V | 43 | ||
| Clock High Time | tCH | 13 | ns | Normal Read (fRSCLK) | 43 | ||
| Clock Low Time | tCL | 13 | ns | Normal Read (fRSCLK) | 43 | ||
| CS# Active Setup Time (relative to SCLK) | tSLCH | 7 | ns | 43 | |||
| CS# Not Active Hold Time (relative to SCLK) | tCHSL | 7 | ns | 43 | |||
| Data In Setup Time | tDVCH | 2 | ns | 43 | |||
| Data In Hold Time | tCHDX | 5 | ns | 43 | |||
| CS# Active Hold Time (relative to SCLK) | tCHSH | 7 | ns | 43 | |||
| CS# Not Active Setup Time (relative to SCLK) | tSHCH | 7 | ns | 43 | |||
| CS# Deselect Time | tSHSL | 20 | ns | From Read to next Read | 43 | ||
| CS# Deselect Time | tSHSL | 40 | ns | From Write/Erase/Program to Read Status Register | 43 | ||
| Output Disable Time | tSHQZ | 6 | ns | 43 | |||
| Clock Low to Output Valid | tCLQV | 8 | ns | Loading: 30pF | 43 | ||
| Clock Low to Output Valid | tCLQV | 6 | ns | Loading: 15pF | 43 | ||
| Output Hold Time | tCLQX | 0 | ns | 43 | |||
| Write Protect Setup Time | tWHSL | 20 | ns | 43 | |||
| Write Protect Hold Time | tSHWL | 100 | ns | 43 | |||
| CS# High to Deep Power-down Mode | tDP | 10 | us | 43 | |||
| CS# High to Standby Mode without Electronic Signature Read | tRES1 | 8.8 | us | 43 | |||
| CS# High to Standby Mode with Electronic Signature Read | tRES2 | 8.8 | us | 43 | |||
| Write Status Register Cycle Time | tW | 5 | 40 | ms | 43 | ||
| Byte-Program Cycle Time | tBP | 20 | 50 | us | 43 | ||
| Page Program Cycle Time | tPP | 1.6 | 10 | ms | 43 | ||
| Sector Erase Cycle Time | tSE | 50 | 500 | ms | 43 | ||
| Block Erase Cycle Time (32K) | tBE32 | 0.3 | 3.8 | s | 43 | ||
| Block Erase Cycle Time (64K) | tBE | 0.6 | 4 | s | 43 | ||
| Chip Erase Cycle Time | tCE | 1.8 | 6.8 | s | 43 | ||
| VCC Rise Time | tVR | 500000 | us/V | 45 | |||
| VCC voltage needed to below VPWD for ensuring initialization | VPWD | 0.9 | V | 47 | |||
| Minimum duration VCC below VPWD for ensuring initialization | tPWD | 300 | us | 47 | |||
| VCC(min.) to device operation | tVSL | 800 | us | 47 | |||
| Ambient Operating Temperature | -40 | 85 | °C | 40 | |||
| Storage Temperature | -65 | 150 | °C | 40 | |||
| VCC to Ground Potential | VCC | -0.5 | 4 | V | 40 | ||
| Latch-up current | -100 | 100 | mA | Includes all pins except VCC; VCC=2.5V, one pin at a time | 48 | ||
| Data retention | 20 | years | 55°C | 48 | |||
| Erase/Program Cycle | 100000 | cycles | 48 |
CAD (KiCad official)
- Symbol:
MX25V1006FZUI - Footprint:
Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm - 3D model: USON-8 (KiCad packages3D, STEP)
- 3D model files:
mx25v1006fzui-etched.step/mx25v1006fzui-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25v1006fzui.step/mx25v1006fzui.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (55 pp, sha256
02fe534c9a6c6c64, retrieved 2026-11-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MX25V1006FZUI
**MXIC(Macronix)** · Pre-ordered Products · USON-8
MX25V1006FZUI from MXIC(Macronix), in a USON-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input that enables serial access to the device; when high the device is in standby mode. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for 1 x I/O, or Serial Data Input & Output for Dual output mode. |
| 3 | WP# | input | Write Protection input; it stays internally pulled up when not physically connected, and the pull-up is disabled if connected. |
| 4 | GND | power_in | Ground. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for 1 x I/O, or Serial Data Input & Output for Dual output mode. |
| 6 | SCLK | input | Serial clock input. |
| 7 | NC | unconnected | No connect pin. |
| 8 | VCC | power_in | +3.3V power supply, with a voltage range of 2.3V to 3.6V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | USON-8 |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Load Current | ILI | -2 | 0.02 | 2 | uA | VCC = VCC Max; VIN = VCC or GND | 42 |
| Output Leakage Current | ILO | -2 | 0.02 | 2 | uA | VCC = VCC Max; VOUT = VCC or GND | 42 |
| VCC Standby Current | ISB1 | | 5 | 25 | uA | VIN = VCC or GND; CS#=VCC | 42 |
| VCC Read | ICC1 | | | 6 | mA | f=50MHz; SCLK=0.1VCC/0.9VCC; SO=Open | 42 |
| VCC Program Current (PP) | ICC2 | | 5 | 20 | mA | Program in Progress; CS#=VCC | 42 |
| VCC Write Status Register (WRSR) Current | ICC3 | | 2.1 | 15 | mA | Program status register in progress; CS#=VCC | 42 |
| VCC Sector Erase Current (SE) | ICC4 | | 5 | 15 | mA | Erase in Progress; CS#=VCC | 42 |
| VCC Chip Erase Current (CE) | ICC5 | | 5 | 20 | mA | Erase in Progress; CS#=VCC | 42 |
| Output Low Voltage | VOL | | | 0.4 | V | IOL = 1.6mA | 42 |
| Low VCC Write Inhibit Voltage | VWI | 1.5 | | 2.1 | V | | 42 |
| Deep Power-down Current | ISB2 | | 10 | | uA | VIN = VCC or GND; CS#=VCC | 42 |
| Input Capacitance | CIN | | 6 | | pF | VIN = 0V | 40 |
| Output Capacitance | COUT | | 8 | | pF | VOUT = 0V | 40 |
| Clock Frequency (fast-read, PP, SE, BE, CE, DP, RES, RDP, WREN, WRDI, RDID, RDSR, WRSR) | fSCLK | | | 80 | MHz | 2.7-3.6V | 43 |
| Clock Frequency (fast-read, PP, SE, BE, CE, DP, RES, RDP, WREN, WRDI, RDID, RDSR, WRSR) | fSCLK | | | 50 | MHz | 2.3-2.7V | 43 |
| Clock Frequency for READ instructions | fRSCLK | | | 33 | MHz | | 43 |
| Clock Frequency for DREAD instructions | fTSCLK | | | 80 | MHz | 2.7-3.6V | 43 |
| Clock Frequency for DREAD instructions | fTSCLK | | | 50 | MHz | 2.3-2.7V | 43 |
| Clock High Time | tCH | 13 | | | ns | Normal Read (fRSCLK) | 43 |
| Clock Low Time | tCL | 13 | | | ns | Normal Read (fRSCLK) | 43 |
| CS# Active Setup Time (relative to SCLK) | tSLCH | 7 | | | ns | | 43 |
| CS# Not Active Hold Time (relative to SCLK) | tCHSL | 7 | | | ns | | 43 |
| Data In Setup Time | tDVCH | 2 | | | ns | | 43 |
| Data In Hold Time | tCHDX | 5 | | | ns | | 43 |
| CS# Active Hold Time (relative to SCLK) | tCHSH | 7 | | | ns | | 43 |
| CS# Not Active Setup Time (relative to SCLK) | tSHCH | 7 | | | ns | | 43 |
| CS# Deselect Time | tSHSL | 20 | | | ns | From Read to next Read | 43 |
| CS# Deselect Time | tSHSL | 40 | | | ns | From Write/Erase/Program to Read Status Register | 43 |
| Output Disable Time | tSHQZ | | | 6 | ns | | 43 |
| Clock Low to Output Valid | tCLQV | | | 8 | ns | Loading: 30pF | 43 |
| Clock Low to Output Valid | tCLQV | | | 6 | ns | Loading: 15pF | 43 |
| Output Hold Time | tCLQX | 0 | | | ns | | 43 |
| Write Protect Setup Time | tWHSL | 20 | | | ns | | 43 |
| Write Protect Hold Time | tSHWL | 100 | | | ns | | 43 |
| CS# High to Deep Power-down Mode | tDP | | | 10 | us | | 43 |
| CS# High to Standby Mode without Electronic Signature Read | tRES1 | | | 8.8 | us | | 43 |
| CS# High to Standby Mode with Electronic Signature Read | tRES2 | | | 8.8 | us | | 43 |
| Write Status Register Cycle Time | tW | 5 | | 40 | ms | | 43 |
| Byte-Program Cycle Time | tBP | | 20 | 50 | us | | 43 |
| Page Program Cycle Time | tPP | | 1.6 | 10 | ms | | 43 |
| Sector Erase Cycle Time | tSE | | 50 | 500 | ms | | 43 |
| Block Erase Cycle Time (32K) | tBE32 | | 0.3 | 3.8 | s | | 43 |
| Block Erase Cycle Time (64K) | tBE | | 0.6 | 4 | s | | 43 |
| Chip Erase Cycle Time | tCE | | 1.8 | 6.8 | s | | 43 |
| VCC Rise Time | tVR | | | 500000 | us/V | | 45 |
| VCC voltage needed to below VPWD for ensuring initialization | VPWD | | | 0.9 | V | | 47 |
| Minimum duration VCC below VPWD for ensuring initialization | tPWD | 300 | | | us | | 47 |
| VCC(min.) to device operation | tVSL | | | 800 | us | | 47 |
| Ambient Operating Temperature | | -40 | | 85 | °C | | 40 |
| Storage Temperature | | -65 | | 150 | °C | | 40 |
| VCC to Ground Potential | VCC | -0.5 | | 4 | V | | 40 |
| Latch-up current | | -100 | | 100 | mA | Includes all pins except VCC; VCC=2.5V, one pin at a time | 48 |
| Data retention | | 20 | | | years | 55°C | 48 |
| Erase/Program Cycle | | 100000 | | | cycles | | 48 |
## CAD (KiCad official)
- Symbol: `MX25V1006FZUI`
- Footprint: `Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm`
- 3D model: USON-8 (KiCad packages3D, STEP)
- 3D model files: `mx25v1006fzui-etched.step` / `mx25v1006fzui-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mx25v1006fzui.step` / `mx25v1006fzui.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MXIC(Macronix) datasheet](docs/mx25v1006fzui-datasheet.pdf) (55 pp, sha256 `02fe534c9a6c6c64`, retrieved 2026-11-08, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mx25v1006fzui-datasheet.pdf)