← Commit history

Initial commit: component/mx25u5121emi-14g

Ray ·9825826b5f ·
2 files changed +85
README.mdadded+51
@@ -0,0 +1,51 @@+# MX25U5121EMI-14G++**MXIC Macronix** · NOR FLASH · SOP-8++MX25U5121EMI-14G from MXIC Macronix, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS# | input | Chip Select, active-low. Drive low to enable the flash and begin a serial transaction; drive high to deselect the device (puts SO into Hi-Z and forces the internal state machine back to Standby Mode). Must go high at a byte boundary for command execution. |+| 2 | SO/SIO1 | bidirectional | Serial Data Output in single/dual read; also serves as bidirectional Serial Data I/O bit 1 during 2x I/O read (DREAD) and 4x I/O read (4READ) modes. Data shifts out on the SCLK falling edge; Hi-Z when the chip is deselected. |+| 3 | WP#/SIO2 | bidirectional | Hardware Write Protect (active-low) when SRWD=1 in the Status Register - freezes the Status Register bits BP0/BP1/SRWD; also serves as bidirectional Serial Data I/O bit 2 during 4x I/O read (4READ) mode. Tie high through a pull-up if write protection is not used. |+| 4 | GND | power_in | Ground reference for both digital core and I/O. Connect to the system 0V rail. |+| 5 | SI/SIO0 | bidirectional | Serial Data Input for single-I/O mode; bidirectional Serial Data I/O bit 0 during 2x I/O read (DREAD) and 4x I/O read (4READ) modes. Data is latched on the rising edge of SCLK. |+| 6 | SCLK | input | Serial Clock input from the SPI master. Supports Mode 0 (CPOL=0, CPHA=0) and Mode 3 (CPOL=1, CPHA=0) up to 70MHz for fast-read commands. Input data is latched on the rising edge and output data shifts on the falling edge. |+| 7 | HOLD#/SIO3 | bidirectional | HOLD input (active-low): while CS# is low, driving HOLD# low pauses serial communication (SO goes Hi-Z, SI and SCLK are don't-care) without deselecting the chip; it does not stop an in-progress program/erase. Also serves as bidirectional Serial Data I/O bit 3 during 4x I/O read (4READ) mode. Tie high through a pull-up if HOLD is not used. |+| 8 | VCC | power_in | Single-supply power input, 1.65V to 2.0V (nominal 1.8V) for read, erase, and program. Latch-up protected to 100mA from -1V to VCC+1V. Decouple with a 0.1uF ceramic capacitor close to the pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | MXIC Macronix |+| Package | SOP-8 |+| Category | Memory |+| Pins | 8 |++## Ordering variants++Same part, different packaging or reel option.++- `MX25U5121EMI-14G`+- `MX25U5121EMI-14GOI-14G`+- `MX25U5121EMI-14GZUI-14G`++## CAD (KiCad official)++- Symbol: `MX25U5121EMI-14G`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [MXIC Macronix datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590909044398252032) (None pp, sha256 `730ae0636462f2e9`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mx25u5121emi-14g-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "mx25u5121emi-14g",+  "version": "0.1.0",+  "type": "component",+  "description": "MXIC Macronix NOR FLASH, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "mx25u5121emi-14g"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mx25u5121emi-14g.kicad_sym",+    "mx25u5121emi-14g.kicad_mod",+    "mx25u5121emi-14g.glb",+    "mx25u5121emi-14g.step",+    "mx25u5121emi-14g.lbr",+    "docs/hero.png",+    "docs/mx25u5121emi-14g-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file