main
Ray Publish 0.1.0 f80910d

MX25R8035FM1IL0

MXIC(Macronix) · NOR FLASH · SOP-8

MX25R8035FM1IL0 from MXIC(Macronix), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Chip Select input that enables the device when driven low.
2 SO/SIO1 bidirectional Serial data output for 1xI/O, or serial data input and output for 2xI/O and 4xI/O read modes.
3 WP#/SIO2 bidirectional Active-low write protection input, or serial data input and output for 4xI/O read mode; has an internal pull-up when not connected.
4 GND power_in Ground.
5 SI/SIO0 bidirectional Serial data input for 1xI/O, or serial data input and output for 4xI/O read mode.
6 SCLK input Serial clock input.
7 RESET#/SIO3 bidirectional Active-low hardware reset pin on this RESET# part option (MX25R8035FM1IL0), or serial data input and output for 4xI/O read mode; has an internal pull-up when not connected.
8 VCC power_in Power supply, 1.65V-3.6V for read, erase and program operations.

Key specifications

Parameter Value
Manufacturer MXIC(Macronix)
Package SOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Load Current ILI -2 2 uA VCC = VCC Max, VIN = VCC or GND 73
Output Leakage Current ILO -2 2 uA VCC = VCC Max, VOUT = VCC or GND 73
VCC Standby Current ISB1 5 24 uA VIN = VCC or GND, CS# = VCC 73
Deep Power-down Current ISB2 0.007 0.35 uA VIN = VCC or GND, CS# = VCC 73
VCC Read Current ICC1 2.8 4.5 mA f=16MHz (4x I/O), SCLK=0.1VCC/0.9VCC, SO=Open 73
VCC Read Current ICC1 2.2 4 mA f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open 73
VCC Program Current (PP) ICC2 3.5 6 mA Program in Progress, CS# = VCC 73
VCC Write Status Register (WRSR) Current ICC3 3.1 6 mA Program status register in progress, CS#=VCC 73
VCC Sector/Block (64K) Erase Current (SE/BE) ICC4 3.1 6 mA Erase in Progress, CS#=VCC 73
VCC Chip Erase Current (CE) ICC5 3.1 6 mA Erase in Progress, CS#=VCC 73
High Voltage Applied at WP# pin Vhv 7 8 V Test Condition, VCC=2.0V 73
Input Low Voltage VIL -0.5 0.2 xVCC (min in V) min -0.5 V; max 0.2VCC 73
Input High Voltage VIH 0.8 xVCC min 0.8VCC; max printed as VCC+0.4 V 73
Output Low Voltage VOL 0.2 V IOL = 100uA 73
Output High Voltage VOH 0.2 V below VCC printed min VCC-0.2 V; IOH = -100uA 73
Operating supply voltage VCC 1.65 3.6 V Read, Erase and Program operations 4
Ambient Operating Temperature (Industrial) -40 85 °C Industrial grade 71
Storage Temperature -65 150 °C 71
Applied Input Voltage -0.5 V -0.5V to VCC+0.5V 71
Applied Output Voltage -0.5 V -0.5V to VCC+0.5V 71
VCC to Ground Potential VCC -0.5 4 V MX25R (1.65V-3.6V) 71
Input Capacitance CIN 6 pF TA = 25°C, f = 1.0 MHz, VIN = 0V 71
Output Capacitance COUT 8 pF TA = 25°C, f = 1.0 MHz, VOUT = 0V 71
Clock Frequency (FAST_READ, PP, SE, etc.) fSCLK 0 33 MHz D.C. to 33 MHz 75
Clock Frequency for READ fRSCLK 33 MHz 75
Clock Frequency for 2READ/DREAD fTSCLK 16 MHz 75
Clock Frequency for 4READ/QREAD fQ 16 MHz 75
Clock Frequency for 4PP f4PP 33 MHz 75
Clock High Time, Normal Read tCH 13 ns Normal Read (fRSCLK) 75
Clock Low Time, Normal Read tCL 13 ns Normal Read (fRSCLK) 75
CS# Active Setup Time tSLCH 5 ns relative to SCLK 75
CS# Not Active Hold Time tCHSL 5 ns relative to SCLK 75
Data In Setup Time tDVCH 2 ns 75
Data In Hold Time tCHDX 3 ns 75
CS# Deselect Time, Read to next Read tSHSL 15 ns From Read to next Read 75
Output Disable Time tSHQZ 8 ns 75
Clock Low to Output Valid tCLQV 12 ns Loading: 30pF 75
Clock Low to Output Valid tCLQV 10 ns Loading: 15pF 75
Write Status Register Cycle Time tW 10 30 ms 75
Page Program Cycle Time tPP 3.2 10 ms 76
Sector Erase Cycle Time tSE 58 240 ms 76
Block Erase (64KB) Cycle Time tBE 0.8 3.5 s 76
Chip Erase Cycle Time tCE 15 30 s 76

CAD (KiCad official)

  • Symbol: MX25R8035FM1IL0
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: mx25r8035fm1il0-etched.step / mx25r8035fm1il0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mx25r8035fm1il0.step / mx25r8035fm1il0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MXIC(Macronix) datasheet (95 pp, sha256 341850a7a17a8d75, retrieved 2026-10-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF