3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMX25R4035FZUIH0
MXIC(Macronix) · NOR FLASH · USON-8(2x3)
MX25R4035FZUIH0 from MXIC(Macronix), in a USON-8(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input that enables the device when driven low. |
| 2 | SO/SIO1 | bidirectional | Serial data output for 1xI/O, or serial data input and output in 4xI/O read mode. |
| 3 | WP#/SIO2 | bidirectional | Active-low write protection input, or serial data input and output in 4xI/O read mode; it has an internal pull-up when not physically connected. |
| 4 | GND | power_in | Ground. |
| 5 | SI/SIO0 | bidirectional | Serial data input for 1xI/O, or serial data input and output in 4xI/O read mode. |
| 6 | SCLK | input | Serial clock input. |
| 7 | RESET#/SIO3 | bidirectional | Active-low hardware reset pin, or serial data input and output in 4xI/O read mode; this MPN (FZUIH0) uses the RESET# function, with an internal pull-up when not physically connected. |
| 8 | VCC | power_in | Power supply, 1.65V to 3.6V for read, erase and program operations. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | USON-8(2x3) |
| Category | Memory |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 67 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 67 | |
| Leakage Current while WP# at Vhv | Iwph | 30 | uA | VCC < 2.1V | 67 | ||
| VCC Standby Current | ISB1 | 9 | 40 | uA | VIN = VCC or GND, CS# = VCC | 67 | |
| Deep Power-down Current | ISB2 | 0.007 | 0.35 | uA | VIN = VCC or GND, CS# = VCC | 67 | |
| VCC Read Current | ICC1 | 4.2 | 6.7 | mA | f=108MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 67 | |
| VCC Read Current | ICC1 | 5 | 8 | mA | f=104MHz (2x I/O), SCLK=0.1VCC/0.9VCC, SO=Open | 67 | |
| VCC Read Current | ICC1 | 3.9 | 6.5 | mA | f=33MHz (4x I/O), SCLK=0.1VCC/0.9VCC, SO=Open | 67 | |
| VCC Read Current | ICC1 | 6.5 | 9.5 | mA | f=104MHz (4x I/O), SCLK=0.1VCC/0.9VCC, SO=Open | 67 | |
| VCC Program Current (PP) | ICC2 | 5.8 | 10 | mA | Program in Progress, CS# = VCC | 67 | |
| VCC Write Status Register (WRSR) Current | ICC3 | 3.5 | 10 | mA | Program status register in progress, CS#=VCC | 67 | |
| VCC Sector/Block (64K) Erase Current (SE/BE) | ICC4 | 3.5 | 10 | mA | Erase in Progress, CS#=VCC | 67 | |
| VCC Chip Erase Current (CE) | ICC5 | 4 | 10 | mA | Erase in Progress, CS#=VCC | 67 | |
| High Voltage Applied at WP# pin | Vhv | 7 | 8 | V | Test Condition, VCC=2.0V | 67 | |
| Input Low Voltage | VIL | -0.5 | V | max printed as 0.2VCC | 67 | ||
| Output Low Voltage | VOL | 0.2 | V | IOL = 100uA | 67 | ||
| Input Capacitance | CIN | 6 | pF | TA = 25°C, f = 1.0 MHz, VIN = 0V | 64 | ||
| Output Capacitance | COUT | 8 | pF | TA = 25°C, f = 1.0 MHz, VOUT = 0V | 64 | ||
| Erase Suspend Latency | tESL | 40 | us | High Performance Mode | 71 | ||
| Program Suspend Latency | tPSL | 40 | us | High Performance Mode | 71 | ||
| Byte-Program | tBP | 32 | 100 | us | High Performance Mode | 71 | |
| Page Program Cycle Time | tPP | 0.85 | 4 | ms | High Performance Mode | 71 | |
| Sector Erase Cycle Time | tSE | 40 | 240 | ms | High Performance Mode | 71 | |
| Block Erase (32KB) Cycle Time | tBE32K | 0.24 | 1.5 | s | High Performance Mode | 71 | |
| Block Erase (64KB) Cycle Time | tBE | 0.48 | 3 | s | High Performance Mode | 71 | |
| Chip Erase Cycle Time | tCE | 3 | 9 | s | High Performance Mode | 71 | |
| Write Status Register Cycle Time | tW | 9.5 | 20 | ms | High Performance Mode | 75 | |
| Operating Voltage | VCC | 1.65 | 3.6 | V | Read, Erase and Program Operations | 4 | |
| Ambient Operating Temperature (Industrial) | TA | -40 | 85 | °C | 64 | ||
| Storage Temperature | Tstg | -65 | 150 | °C | 64 | ||
| VCC to Ground Potential | VCC | -0.5 | 4 | V | MX25R (1.65V-3.6V) | 64 | |
| Applied Input Voltage | VIN | -0.5 | V | max printed as VCC+0.5V | 64 | ||
| Applied Output Voltage | VOUT | -0.5 | V | max printed as VCC+0.5V | 64 |
CAD (KiCad official)
- Symbol:
MX25R4035FZUIH0 - Footprint:
Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm - 3D model: USON-8(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm nominal QFN height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
mx25r4035fzuih0-etched.step/mx25r4035fzuih0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25r4035fzuih0.step/mx25r4035fzuih0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (85 pp, sha256
ac115f6a8ed43b3d, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).