main
Ray
Publish 0.1.0
b2612da
MX25R1035FZUIL0
MXIC(Macronix) · NOR FLASH · USON-8(2x3)
MX25R1035FZUIL0 from MXIC(Macronix), in a USON-8(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input for the serial interface, as described in the pin description table. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for 1 x I/O operation and Serial Data Input & Output (SIO1) for the 4 x I/O read mode. |
| 3 | WP#/SIO2 | bidirectional | Write Protection, active low, or Serial Data Input & Output (SIO2) for the 4 x I/O read mode, with an internal pull-high circuit. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for 1 x I/O operation and Serial Data Input & Output (SIO0) for the 4 x I/O read mode. |
| 6 | SCLK | input | Clock Input for the serial interface. |
| 7 | RESET#/SIO3 | bidirectional | Hardware Reset pin, active low, or Serial Data Input & Output (SIO3) for the 4 x I/O read mode, with an internal pull-high circuit. |
| 8 | VCC | power_in | Power Supply pin; the device operates at 1.65V-3.6V per the ordering information. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | USON-8(2x3) |
| Category | Memory |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Operating Temperature | TA | -40 | 85 | °C | Industrial grade | 64 | |
| Storage Temperature | TSTORE | -65 | 150 | °C | 64 | ||
| VCC to Ground Potential | -0.5 | 4 | V | MX25R (1.65V-3.6V) | 64 | ||
| Operation Voltage VCC | VCC | 1.65 | 3.6 | V | Read, Erase and Program operations | 4 | |
| Input Load Current | ILI | -2 | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 66 | |
| Output Leakage Current | ILO | -2 | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 66 | |
| VCC Standby Current | ISB1 | 5 | 24 | uA | VIN = VCC or GND, CS# = VCC | 66 | |
| Deep Power-down Current | ISB2 | 0.007 | 0.35 | uA | VIN = VCC or GND, CS# = VCC | 66 | |
| VCC Read Current | ICC1 | 2.8 | 4.5 | mA | f=16MHz (4x I/O), SCLK=0.1VCC/0.9VCC, SO=Open | 66 | |
| VCC Read Current | ICC1 | 2.2 | 4 | mA | f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 66 | |
| VCC Program Current (PP) | ICC2 | 3.5 | 6 | mA | Program in Progress, CS# = VCC | 66 | |
| VCC Write Status Register (WRSR) Current | ICC3 | 3.1 | 6 | mA | Program status register in progress, CS#=VCC | 66 | |
| VCC Sector/Block (64K) Erase Current (SE/BE) | ICC4 | 3.1 | 6 | mA | Erase in Progress, CS#=VCC | 66 | |
| VCC Chip Erase Current (CE) | ICC5 | 3.1 | 6 | mA | Erase in Progress, CS#=VCC | 66 | |
| High Voltage Applied at WP# pin | Vhv | 7 | 8 | V | Test Condition, VCC=2.0V | 66 | |
| Output Low Voltage | VOL | 0.2 | V | IOL = 100uA | 66 | ||
| Clock Frequency for FAST_READ, RDSFDP, PP, SE, BE32K, BE, CE, DP, RES, WREN, WRDI, RDID, RDSR, WRSR | fSCLK | 33 | MHz | 68 | |||
| Clock Frequency for READ instructions | fRSCLK | 33 | MHz | 68 | |||
| Clock Frequency for 2READ/DREAD instructions | fTSCLK | 16 | MHz | 68 | |||
| Clock Frequency for 4READ/QREAD instructions | fQ | 16 | MHz | 68 | |||
| Clock Frequency for 4PP (Quad page program) | f4PP | 33 | MHz | 68 | |||
| Clock High Time | tCH | 13 | ns | Normal Read (fRSCLK) | 68 | ||
| Clock Low Time | tCL | 13 | ns | Normal Read (fRSCLK) | 68 | ||
| Clock Rise Time (peak to peak) | tCLCH | 0.1 | V/ns | 68 | |||
| Clock Fall Time (peak to peak) | tCHCL | 0.1 | V/ns | 68 | |||
| CS# Active Setup Time (relative to SCLK) | tSLCH | 5 | ns | 68 | |||
| CS# Not Active Hold Time (relative to SCLK) | tCHSL | 5 | ns | 68 | |||
| Data In Setup Time | tDVCH | 2 | ns | 68 | |||
| Data In Hold Time | tCHDX | 3 | ns | 68 | |||
| CS# Active Hold Time (relative to SCLK) | tCHSH | 5 | ns | 68 | |||
| CS# Not Active Setup Time (relative to SCLK) | tSHCH | 5 | ns | 68 | |||
| CS# Deselect Time | tSHSL | 15 | ns | From Read to next Read | 68 | ||
| CS# Deselect Time | tSHSL | 30 | ns | From Write/Erase/Program to Read Status Register | 68 | ||
| Output Disable Time | tSHQZ | 8 | ns | 68 | |||
| Clock Low to Output Valid | tCLQV | 12 | ns | Loading: 30pF | 68 | ||
| Clock Low to Output Valid | tCLQV | 10 | ns | Loading: 15pF | 68 | ||
| Output Hold Time | tCLQX | 0 | ns | 68 | |||
| Write Protect Setup Time | tWHSL | 10 | ns | 68 | |||
| Write Protect Hold Time | tSHWL | 10 | ns | 68 | |||
| CS# High to Deep Power-down Mode | tDP | 10 | us | 68 | |||
| Delay Time for Release from Deep Power-Down Mode | tDPDD | 30 | us | once entering Deep Power-Down Mode | 68 | ||
| CS# Toggling Time before Release from Deep Power-Down Mode | tCRDP | 20 | ns | 68 | |||
| Recovery Time for Release from deep power down mode | tRDP | 35 | us | 68 | |||
| Write Status Register Cycle Time | tW | 10 | 30 | ms | 68 | ||
| Write Status Register Cycle Time for Mode Switching | tWMS | 20 | us | 68 | |||
| Erase Suspend Latency | tESL | 60 | us | Ultra Low Power Mode | 69 | ||
| Program Suspend Latency | tPSL | 60 | us | Ultra Low Power Mode | 69 | ||
| Latency between Program Resume and next Suspend | tPRS | 0.3 | us | 69 | |||
| Latency between Erase Resume and next Suspend | tERS | 0.3 | us | 69 | |||
| Byte-Program | tBP | 40 | 100 | us | 69 | ||
| Page Program Cycle Time | tPP | 3.2 | 10 | ms | 69 | ||
| Sector Erase Cycle Time | tSE | 58 | 240 | ms | 69 | ||
| Block Erase (32KB) Cycle Time | tBE32K | 0.4 | 1.75 | s | 69 | ||
| Block Erase (64KB) Cycle Time | tBE | 0.8 | 3.5 | s | 69 | ||
| Chip Erase Cycle Time | tCE | 1.88 | 3.75 | s | 69 | ||
| VCC Rise Time | tVR | 500000 | us/V | 72 | |||
| Erase/Program Cycle | 100000 | cycles | 75 | ||||
| Latch-up Current | -100 | 100 | mA | VCC = typical operation voltage, one pin at a time | 76 |
CAD (KiCad official)
- Symbol:
MX25R1035FZUIL0 - Footprint:
Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm - 3D model: USON-8(2x3) (KiCad packages3D, STEP)
- 3D model files:
mx25r1035fzuil0-etched.step/mx25r1035fzuil0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mx25r1035fzuil0.step/mx25r1035fzuil0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MXIC(Macronix) datasheet (85 pp, sha256
c33d918edf658e42, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MX25R1035FZUIL0
**MXIC(Macronix)** · NOR FLASH · USON-8(2x3)
MX25R1035FZUIL0 from MXIC(Macronix), in a USON-8(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip Select input for the serial interface, as described in the pin description table. |
| 2 | SO/SIO1 | bidirectional | Serial Data Output for 1 x I/O operation and Serial Data Input & Output (SIO1) for the 4 x I/O read mode. |
| 3 | WP#/SIO2 | bidirectional | Write Protection, active low, or Serial Data Input & Output (SIO2) for the 4 x I/O read mode, with an internal pull-high circuit. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SI/SIO0 | bidirectional | Serial Data Input for 1 x I/O operation and Serial Data Input & Output (SIO0) for the 4 x I/O read mode. |
| 6 | SCLK | input | Clock Input for the serial interface. |
| 7 | RESET#/SIO3 | bidirectional | Hardware Reset pin, active low, or Serial Data Input & Output (SIO3) for the 4 x I/O read mode, with an internal pull-high circuit. |
| 8 | VCC | power_in | Power Supply pin; the device operates at 1.65V-3.6V per the ordering information. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MXIC(Macronix) |
| Package | USON-8(2x3) |
| Category | Memory |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Operating Temperature | TA | -40 | | 85 | °C | Industrial grade | 64 |
| Storage Temperature | TSTORE | -65 | | 150 | °C | | 64 |
| VCC to Ground Potential | | -0.5 | | 4 | V | MX25R (1.65V-3.6V) | 64 |
| Operation Voltage VCC | VCC | 1.65 | | 3.6 | V | Read, Erase and Program operations | 4 |
| Input Load Current | ILI | -2 | | 2 | uA | VCC = VCC Max, VIN = VCC or GND | 66 |
| Output Leakage Current | ILO | -2 | | 2 | uA | VCC = VCC Max, VOUT = VCC or GND | 66 |
| VCC Standby Current | ISB1 | | 5 | 24 | uA | VIN = VCC or GND, CS# = VCC | 66 |
| Deep Power-down Current | ISB2 | | 0.007 | 0.35 | uA | VIN = VCC or GND, CS# = VCC | 66 |
| VCC Read Current | ICC1 | | 2.8 | 4.5 | mA | f=16MHz (4x I/O), SCLK=0.1VCC/0.9VCC, SO=Open | 66 |
| VCC Read Current | ICC1 | | 2.2 | 4 | mA | f=33MHz, SCLK=0.1VCC/0.9VCC, SO=Open | 66 |
| VCC Program Current (PP) | ICC2 | | 3.5 | 6 | mA | Program in Progress, CS# = VCC | 66 |
| VCC Write Status Register (WRSR) Current | ICC3 | | 3.1 | 6 | mA | Program status register in progress, CS#=VCC | 66 |
| VCC Sector/Block (64K) Erase Current (SE/BE) | ICC4 | | 3.1 | 6 | mA | Erase in Progress, CS#=VCC | 66 |
| VCC Chip Erase Current (CE) | ICC5 | | 3.1 | 6 | mA | Erase in Progress, CS#=VCC | 66 |
| High Voltage Applied at WP# pin | Vhv | 7 | | 8 | V | Test Condition, VCC=2.0V | 66 |
| Output Low Voltage | VOL | | | 0.2 | V | IOL = 100uA | 66 |
| Clock Frequency for FAST_READ, RDSFDP, PP, SE, BE32K, BE, CE, DP, RES, WREN, WRDI, RDID, RDSR, WRSR | fSCLK | | | 33 | MHz | | 68 |
| Clock Frequency for READ instructions | fRSCLK | | | 33 | MHz | | 68 |
| Clock Frequency for 2READ/DREAD instructions | fTSCLK | | | 16 | MHz | | 68 |
| Clock Frequency for 4READ/QREAD instructions | fQ | | | 16 | MHz | | 68 |
| Clock Frequency for 4PP (Quad page program) | f4PP | | | 33 | MHz | | 68 |
| Clock High Time | tCH | 13 | | | ns | Normal Read (fRSCLK) | 68 |
| Clock Low Time | tCL | 13 | | | ns | Normal Read (fRSCLK) | 68 |
| Clock Rise Time (peak to peak) | tCLCH | | | 0.1 | V/ns | | 68 |
| Clock Fall Time (peak to peak) | tCHCL | | | 0.1 | V/ns | | 68 |
| CS# Active Setup Time (relative to SCLK) | tSLCH | 5 | | | ns | | 68 |
| CS# Not Active Hold Time (relative to SCLK) | tCHSL | 5 | | | ns | | 68 |
| Data In Setup Time | tDVCH | 2 | | | ns | | 68 |
| Data In Hold Time | tCHDX | 3 | | | ns | | 68 |
| CS# Active Hold Time (relative to SCLK) | tCHSH | 5 | | | ns | | 68 |
| CS# Not Active Setup Time (relative to SCLK) | tSHCH | 5 | | | ns | | 68 |
| CS# Deselect Time | tSHSL | | | 15 | ns | From Read to next Read | 68 |
| CS# Deselect Time | tSHSL | | | 30 | ns | From Write/Erase/Program to Read Status Register | 68 |
| Output Disable Time | tSHQZ | | | 8 | ns | | 68 |
| Clock Low to Output Valid | tCLQV | | | 12 | ns | Loading: 30pF | 68 |
| Clock Low to Output Valid | tCLQV | | | 10 | ns | Loading: 15pF | 68 |
| Output Hold Time | tCLQX | 0 | | | ns | | 68 |
| Write Protect Setup Time | tWHSL | 10 | | | ns | | 68 |
| Write Protect Hold Time | tSHWL | 10 | | | ns | | 68 |
| CS# High to Deep Power-down Mode | tDP | | | 10 | us | | 68 |
| Delay Time for Release from Deep Power-Down Mode | tDPDD | | | 30 | us | once entering Deep Power-Down Mode | 68 |
| CS# Toggling Time before Release from Deep Power-Down Mode | tCRDP | 20 | | | ns | | 68 |
| Recovery Time for Release from deep power down mode | tRDP | | | 35 | us | | 68 |
| Write Status Register Cycle Time | tW | | 10 | 30 | ms | | 68 |
| Write Status Register Cycle Time for Mode Switching | tWMS | | | 20 | us | | 68 |
| Erase Suspend Latency | tESL | | | 60 | us | Ultra Low Power Mode | 69 |
| Program Suspend Latency | tPSL | | | 60 | us | Ultra Low Power Mode | 69 |
| Latency between Program Resume and next Suspend | tPRS | 0.3 | | | us | | 69 |
| Latency between Erase Resume and next Suspend | tERS | 0.3 | | | us | | 69 |
| Byte-Program | tBP | | 40 | 100 | us | | 69 |
| Page Program Cycle Time | tPP | | 3.2 | 10 | ms | | 69 |
| Sector Erase Cycle Time | tSE | | 58 | 240 | ms | | 69 |
| Block Erase (32KB) Cycle Time | tBE32K | | 0.4 | 1.75 | s | | 69 |
| Block Erase (64KB) Cycle Time | tBE | | 0.8 | 3.5 | s | | 69 |
| Chip Erase Cycle Time | tCE | | 1.88 | 3.75 | s | | 69 |
| VCC Rise Time | tVR | | | 500000 | us/V | | 72 |
| Erase/Program Cycle | | 100000 | | | cycles | | 75 |
| Latch-up Current | | -100 | | 100 | mA | VCC = typical operation voltage, one pin at a time | 76 |
## CAD (KiCad official)
- Symbol: `MX25R1035FZUIL0`
- Footprint: `Package_SON:SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm`
- 3D model: USON-8(2x3) (KiCad packages3D, STEP)
- 3D model files: `mx25r1035fzuil0-etched.step` / `mx25r1035fzuil0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mx25r1035fzuil0.step` / `mx25r1035fzuil0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MXIC(Macronix) datasheet](https://www.macronix.com/Lists/Datasheet/Attachments/8656/MX25R1035F,%20Wide%20Range,%201Mb,%20v1.4.pdf) (85 pp, sha256 `c33d918edf658e42`, retrieved 2026-11-21)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mx25r1035fzuil0-datasheet.pdf)